TRAXXAS

Traxxas Idler Gear 20T/Idler Gear Shaft, 3996X

This is the replacement 20-Tooth Idler Gear and Shaft for the Traxxas Summit and Maxx series 4WD RTR.

TRAXXAS

Traxxas Inner Drive Cups for Steel CV Driveshafts on Ford GT & 4-Tec 2.0, 8353X

These are the Traxxas Inner Drive Cups for the Steel Constant-Velocity Driveshafts used on the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars. Includes screw pins (2).

TRAXXAS

Traxxas Inner Driveshaft Assembly for 1/16 Summit VXL, 7250

This is the Inner Driveshaft Assembly for the Traxxas 1/16 Summit. Fits front & rear, differential side.

TRAXXAS

Traxxas Inner Fender Braces for the TRX-4, 8019

These are the Inner Fender Braces (front & rear) for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit.

TRAXXAS

Traxxas Input Shaft Slash 4x4, 6893

This is the Input Shaft for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Input Shaft/Drive Gear Assembly (18-tooth steel top gear), 3992

This is the replacement Input Shaft/Drive Gear Assembly for the E-Maxx and other Traxxas R/C vehicles.FEATURES: Steel shaft, black in color. Steel drive gear assembly, silver in color.INCLUDES: One...

TRAXXAS

Traxxas Kumho Tires & Split-Spoke Black Beadlock Wheels (2WD front), 5882

These are the Traxxas Kumho Tires and SCT Split-Spoke Satin Chrome Black Beadlock Wheels with inserts assembled and glued. They fit the Traxxas Slash 2WD front.

TRAXXAS

Traxxas Land Rover Defender Grill for the TRX-4, 8013

This is the Land Rover Defender Grill for the Traxxas TRX-4 Scale and Trail Crawler. Includes grill mount (3)/ headlight housing (2)/ lens (2)/ headlight mount (2). Fits #8011 body.

TRAXXAS

Traxxas Large Rod Ends, Revo/Summit/Slayer (for rear toe link only) (4), 5348

TraxxaThis is a set of Rod Ends for the Traxxas Revo, Slayer, or Summit. They are to be used on the Rear Toe-Link Rods only. Ring on the rod end shaft denotes for Rear Toe Links only. If Pivot Balls...

TRAXXAS

Traxxas LED Light Bar for the LaTrax Alias Quad-Copter, 6655

YOU ASKED FOR IT AND TRAXXAS LISTENED! This is the Traxxas LED Light Bar for the LaTrax Alias Quad-Copter.

TRAXXAS

Traxxas Left Rear Suspension Arm for Sledge 1/8 Monster Truck - Red, 9534R

This is the Red Left Rear Suspension Arm for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Lightbar Front Bumper Chrome/Roof Chrome, 5634

This is the Roof and Front Bumper Lightbar for use on the Traxxas Summit Truck RTR.

TRAXXAS

Traxxas Lightbar Roof Chrome 1/16 Summit VXL, 7221

This is the Chrome Roof Lightbar for the 1/16 Summit VXL.

TRAXXAS

Traxxas Low Profile Wing Mounts for E-Revo Brushless, 8616

These are the Low Profile Wing Mounts for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas Main Diff Gear w/Side Cover Plate & Screws, 2381

This is the Main Differential Gear for the Traxxas Bandit, Stampede and Rustler.

TRAXXAS

Traxxas Main Shaft Bearings for the DR-1 Helicopter, 6347

This is the Traxxas Main Shaft Bearings for use with the DR-1 Helicopter.

TRAXXAS

Traxxas Mamba Monster ESC Mounting Plate, 5626

This is the Castle Creations Mamba Monster ESC Mounting Plate for the Traxxas Brushless E-Revo.

TRAXXAS

Traxxas Metal 36-Tooth Output Gear for E-Revo BL, 8685

This is the Metal 36-Tooth Output Gear for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Metal Gear Set for 2275 Servo, 2277

This is the Traxxas Metal Gear Set for the 2275 Servo used on the 1/8 Traxxas Sledge Monster Truck and other specified Traxxas vehicles.

TRAXXAS

Traxxas Metal Steering Servo Horn for Sledge 1/8 Monster Truck, 9544

This is the Metal Steering Servo Horn for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Metal Wire Hanger for Resonator Pipe on T-Maxx with long wheelbase, 4961

This is a Metal Hanger for the Resonator Pipe on the Traxxas T-Maxx with Long Wheelbase.

TRAXXAS

Traxxas Motor Mount - DCB M41 Catamaran, 5782

Traxxas Motor Mount for the DCB M41 Catamaran Race Boat. Includes flex cable guard.

TRAXXAS

Traxxas Motor Mount Hardware Kit for Sledge 1/8 Monster Truck, 9591

This is the Motor Mount Hardware Kit for the 1/8 Traxxas Sledge Monster Truck. Includes 4 screws.

TRAXXAS

Traxxas Motor Mount Hinge Post E-Revo, 5661

This is the Motor Mount Hinge Post for the Traxxas E-Revo.

TRAXXAS

Traxxas Motor Plate for E-Revo Brushless, 8690

This is the Motor Plate for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas Motor Plate Single Motor E-Revo, 5690X

This is the Single Motor Plate for the Traxxas E-Revo Truck. For single motor installation, use with gear cover #5677X.

TRAXXAS

Traxxas Non-Skid Feet (4) for the LaTrax Alias Quad-Copter, 6649

This is the Traxxas Non-Skid Feet for the LaTrax Alias Quad-Copter. Includes 4 pieces.

TRAXXAS

Traxxas Oilite Bushings (5x8x2.5mm), 3775

Traxxas Oilite bushings (5x8x2.5mm) (12)

TRAXXAS

Traxxas Oilite Bushings 5x11x4mm, 1675

This is a replacement bushing set for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Orange Canopy Roll Hoop - Aton Quad, 7920

This is the Traxxas Orange Canopy Roll Hoop for the Aton Quad (7920).

TRAXXAS

Traxxas Orange Rotor Blade Set for the LaTrax Alias Quad-Copter, 6630

This is the Traxxas Orange Rotor Blade Set for the LaTrax Alias Quad-Copter. Includes 1.6x5mm BCS (2).

TRAXXAS

Traxxas Output Gears 33T, 3985X

This is the Output Gear Set for the Traxxas Summit and Maxx series 4WD RTR. Includes two 33-tooth output gears, drive dog carrier and output shaft spacer.

TRAXXAS

Traxxas Pinion Gear 20T 0.8 metric pitch, 5646

This is the 20-tooth 0.8 metric pitch (compatible with 32-pitch) pinion gear for the Traxxas E-Maxx Brushless Edition RTR Truck. Fits 5mm shaft.

TRAXXAS

Traxxas Pinion Gear 48P 26-Tooth, 2426

This is an optional 26-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 28-Tooth, 4728

This is an optional 28-tooth pinion gear for the Traxxas 4-TEC and other Traxxas vehicles.

TRAXXAS

Traxxas Piston Damper, 7067

This is a set of Piston Dampers for the Traxxas 1/16 Rally Racer. Includes 2x0.5mm hole, red (4)/ travel limiters (4).

TRAXXAS

Traxxas Pivot Balls for the 1/18 LaTrax Vehicles, 7540X

This is the Traxxas Pivot Balls for the 1/18 LaTrax Teton, Desert Prerunner, and Rally Car. Includes black (6), long (2), and silver (2).

TRAXXAS

Traxxas Pivot Balls/Caps (4), 7033

These are the Pivot Balls and Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Plastic Bellcrank Bushings, 5x8x2.5mm (4), 2545

These are the Stock Replacement Bellcrank Bushings for the Nitro Rustler and other specified Traxxas R/C vehicles. These are located in the steering bellcrank arms. FEATURES: White nylon construction.

TRAXXAS

Traxxas Propeller for Blast Boat, 3834

This is the Propeller for the Traxxas Blast Electric R/C boat.

TRAXXAS

Traxxas Propeller Shaft Blast Boat, 3535

This is a Propeller Shaft for the Traxxas Blast RTR Boat.

TRAXXAS

Traxxas Push Rod w/Hollow Balls for 1/16 E-Revo, 7118

These are the Pushrods and Hollow Balls for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

TRAXXAS

Traxxas Rally Wheels and BFGoodrich Rally Tires Assembled, 7372

This is a pair of the Rally Wheels and BFGoodrich Rally Tires Assembled for the Traxxas 1/16 Rally Racer.

TRAXXAS

Traxxas Rear Blue Springs - Monster Jam, 3757T

These are the Rear Blue Springs for the Traxxas Son-uva Digger and other Monster Jam Trucks.

TRAXXAS

Traxxas Rear Bumper for the TRX-4, 8236

This is the Rear Bumper for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit.

TRAXXAS

Traxxas Rear Bumper with Mount for Rustler 4X4, 6737

This is the Rear Bumper with Mount for the Rustler 4X4 XL-5 and VXL models.

TRAXXAS

Traxxas Rear Center Driveshaft for Sledge 1/8 Monster Truck, 9556

This is the Rear Center Driveshaft for the 1/8 Traxxas Sledge Monster Truck. Includes (1) shaft, 4mm x 146.5mm.

TRAXXAS

Traxxas Rear Driveshaft Assembly Heavy Duty for Telluride 4x4, 6761

This is the Rear Heavy Duty Driveshaft Assembly for the Telluride 4x4 Extreme Terrain Truck. Works for either left or right side. Comes fully assembled and includes screw pin.

TRAXXAS

Traxxas Rear Heavy-Duty Stub Axles, 6853X

These are the Rear Heavy-Duty Stub Axles with pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Rear Left Suspension Arms for E-Revo, 8634

These are the Rear Left Suspension Arms for the new Traxxas Next Generation E-Revo. They are heavy-duty and for the adjustable wheelbase. Includes (1) upper and (1) lower.

TRAXXAS

Traxxas Rear Right Suspension Arms for E-Revo, 8633

These are the Rear Right Suspension Arms for the new Traxxas Next Generation E-Revo. They are heavy-duty and for the adjustable wheelbase. Includes (1) upper and (1) lower.

TRAXXAS

Traxxas Rear Shock Tower for Drag Slash, 9418

This is the Rear Shock Tower for the 1/10 Traxxas Drag Slash.

TRAXXAS

Traxxas Rear Springs White, 2457A

These are the Rear White Springs for the Traxxas Bandit.

TRAXXAS

Traxxas Rear Suspension Arm Covers for Sledge 1/8 Monster Truck - Green, 9634G

These are the Green Rear Suspension Arm Covers for the 1/8 Traxxas Sledge Monster Truck. Includes left and right covers/ 2.5x8 CCS (12).

TRAXXAS

Traxxas Rear Suspension Arm Set - 1/16 E-Revo, 7132

This is the Rear Suspension Arm Set for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

TRAXXAS

Traxxas Rear Suspension Arms (left or right/upper & lower), 5333

This is a pair of stock replacement Rear Suspension Arms for the Traxxas Revo. These arms attach to the rear bulkhead. Since these are symmetrical, they can be used on left or right side.FEATURES:...

TRAXXAS

Traxxas Rear Suspension Pin Mounts Jato 3.3, 5559

These are the Rear Suspension Pin Mounts for the Traxxas Nitro Jato Stadium Truck.

TRAXXAS

Traxxas Rear Sway Bar Linkage - Stampede 4x4, 6897

This is the Rear Sway Bar Linkage for the Traxxas Stampede 4x4. Assembled with rod ends, hollow balls and ball studs.

TRAXXAS

Traxxas Rebuild Kit for Steel Constant-Velocity Driveshafts - 1/16 Monster Jam, 7055

This is the Traxxas Rebuild Kit for Steel Constant-Velocity Driveshafts on 16th Monster Jam. Includes pins, o-rings, stub axles for driveshafts assemblies.

TRAXXAS

Traxxas Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts, 9058X

This is the Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts used on the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models. Includes pins and hardware for one...