TRAXXAS

Traxxas Screws 3x18mm Roundhead Machine, 2565

These are Traxxas 3x18mm Roundhead Machine Screws for the Traxxas E-Maxx.

TRAXXAS

Traxxas Screws 3x20mm Roundhead Machine, 2566

These are the Traxxas 3x20mm Roundhead Machine Screws for the Stampede 2WD, Monster Jam 1/10, Nitro Slash, and other specified Traxxas vehicles.

TRAXXAS

Traxxas Screws 3x30mm Roundhead Machine, 2572

These are the Traxxas 3x30mm Roundhead Machine Screws for the Stampede 2WD, Monster Jam 1/10h, and other specified Traxxas vehicles.

TRAXXAS

Traxxas Screws, 3x15mm flat-head machine (hex drive) (6), 3646

This is the 3x15mm flat-head machine screw set (hex drive) (6)

TRAXXAS

Traxxas SCT Split-Spoke Satin Chrome Black Beadlock Wheels, dual profile (2.2'' outer 3.0'' inner) (Slash 2WD front), 5876

These are the Traxxas SCT Split-Spoke Satin Chrome Black Beadlock Wheels, dual profile (2.2'' outer/ 3.0'' inner). They fit the Slash 2WD front only.

TRAXXAS

Traxxas Servo Case for 2018 Servo, 2041

This is the Servo Case Set for the Traxxas #2018 Servo.

TRAXXAS

Traxxas Servo Case/Gaskets for 2080 VXL Servo, 2081

This is the Servo Case with Gaskets for the Micro Waterproof Servo used on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Shaft for 1/16 GTR Shocks (2), 7063

These are the GTR Shock Shafts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Shift Fork and Shaft, 3989X

This is the Shift Fork and Shaft included with the optional Two Speed Conversion Kit used on the Traxxas E-Maxx.

TRAXXAS

Traxxas Shift Linkage Revo, 5392

This is the replacement Shift Linkage Set for the Traxxas Revo and other specified Traxxas R/C vehicles. Includes ball collar, spring, ball cup, servo horn, and linkage wire.

TRAXXAS

Traxxas Shock Boots Jato 3.3, 5464

These are the Rubber Shock Boots for the Traxxas Jato. The boots are expandable to seal and protect the shock shaft.

TRAXXAS

Traxxas Shock Caps (2)/ Shock Bottoms (2), 3767

These are the Shock Caps and Shock Bottom for several Traxxas R/C vehicles. The set comes complete with 2 caps and 2 bottoms.

TRAXXAS

Traxxas Shock Shafts (steel, chrome finish, xx-long), 2656

These are the replacement steel chrome finish XX-long Shock Shafts from Traxxas.

TRAXXAS

Traxxas Shock Shafts Steel (long) (2), 1664

This is the replacement front shock shafts for the Traxxas LSII.

TRAXXAS

Traxxas Shock Tower Front, 4439

This is the front shock tower for the Nitro Rustler and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Shock Towers for the TRX-4, 8216

These are the Shock Towers (front & rear/left & right) for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit.

TRAXXAS

Traxxas Shock Towers Front and Rear for the 1/18 LaTrax Rally Car, 7537

These are the Traxxas Shock Towers for the 1/18 LaTrax Rally Car.

TRAXXAS

Traxxas Shoulder Screws for Steering Bellcranks (3x30mm hex cap), 3742

Traxxas Shoulder Screws for Steering Bellcranks - Features metal construction. Chrome draglink shoulder screws with a phillips drive. Black steering bellcrank shoulder screws with a hexagon socket...

TRAXXAS

Traxxas Shoulder Screws w/o threadlock (3x10mm (6), 3967

This is the 3x10mm Shoulder Screw Set without threadlock for several Traxxas vehicles.

TRAXXAS

Traxxas Shoulder Screws w/threadlock (3x10mm (6), 3966

This is the 3x10mm Shoulder Screw Set with threadlock for several Traxxas vehicles.

TRAXXAS

Traxxas Slick Tires on Red Chrome 12-Spoke Wheels for the 1/18 LaTrax Rally Car, 7573X

These are Traxxas Slick Tires on Red Chrome 12-Spoke Wheels for the 1/18 LaTrax Rally Car.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit - X-Maxx, 7789

This is the Traxxas Slipper Clutch Rebuild Kit for the X-Maxx Monster Truck (7789). Includes steel disc, friction insert (1), spring (1), 2.5x12mm pin, 4.0mm NL(1).

TRAXXAS

Traxxas Slipper Pressure Plate & Hub (aluminum alloy), 5556

These are the Slipper Press Plate and Hub for several Traxxas R/C vehicles. INCLUDES: One Slipper Press Plate; One Slipper Press Plate Hub.

TRAXXAS

Traxxas Slipper Pressure Plate/Hub (alloy), 5351

This is a Replacement Slipper Pressure Plate and Slipper Hub for several Traxxas vehicles, including the Revo series, Maxx series, Summit & Slayer. These are part of the slipper assembly.FEATURES:...

TRAXXAS

Traxxas Small Rod Ends (steering linkage), 5349

This is the Small Rod End Set for the Traxxas Revo. These are used on the steering linkage.FEATURES: Plastic construction; Black in color; Metal Pivot Balls.INCLUDES: Six Rod Ends; Six Pivot Balls...

TRAXXAS

Traxxas Spool for T-Maxx, 4981X

This is the Optional Differential Spool for the Traxxas T-Maxx Truck. This is located in the bulkhead and eliminates the differential. This part is recommended for off-road use only. Requires #4981...

TRAXXAS

Traxxas Spool/Differential Housing Plug for TRX-4, 8297

This is the Spool/Differential Housing Plug/e-clip for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit.

TRAXXAS

Traxxas Springs Front Black, 2458

This is a pair of Black Front Springs for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Springs White Rear Progressive Rate 4x4, 6858

These are replacement white Rear progressive rate springs for the Traxxas Slash and Stampede 4x4.

TRAXXAS

Traxxas Springs, rear (red) (2.9 rate) (2), 3757R

These are the Red Rear Traxxas T-Maxx Springs with a 2.9 pound tension rate (2)

TRAXXAS

Traxxas Spur gear (38-tooth; 1.0 metric pitch), 3954

This is a 38-tooth, 1.0 metric pitch spur gear for several Traxxas vehicles.

TRAXXAS

Traxxas Spur gear (62-tooth; 0.8 metric pitch), 3959

This is the 62-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Spur gear (65-tooth; 0.8 metric pitch), 3960

This is the 65-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Spur gear (68-tooth; 0.8 metric pitch), 3961

This is the 68-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Spur Gear 48P 83-Tooth, 4683

This is an optional spur gear for certain Traxxas VXL units with the torque control slipper clutch.

TRAXXAS

Traxxas Spur Gear 54-tooth 1.0 metric pitch - X-Maxx/XO-1, 6449

This is the Traxxas Spur Gear, 54-tooth, 1.0 metric pitch, for the X-Maxx and XO-1 4WD Supercar.

TRAXXAS

Traxxas Spur Gear 66-Tooth 32-Pitch w/bushing, 3166

This is the direct replacement spur gear for the Traxxas Nitro Stampede and Nitro Hawk.

TRAXXAS

Traxxas Steel 5.0mm Toe Link for E-Revo, 8638

This is the Steel 5.0mm Toe Link for the new Traxxas Next Generation E-Revo. Works front or rear.

TRAXXAS

Traxxas Steel Center Differential Output Gear for E-Revo Brushless, 8684

This is the Steel Center Differential Output Gear for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Steel Center Differential Output Gears for Maxx 4S, 8989

These are the stock replacement Steel Center Differential Output Gears for the Traxxas Maxx 4S Monster Truck. Includes 2 gears.

TRAXXAS

Traxxas Steel CV Front Driveshaft for Sledge 1/8 Monster Truck, 9550

This is the Steel Constant-Velocity Front Driveshaft for the 1/8 Traxxas Sledge Monster Truck. Includes 1 assembled driveshaft.

TRAXXAS

Traxxas Steel Differential Output Cup for Sledge 1/8 Monster Truck, 9583

This is the Steel Differential Output Cup (front or rear) for the 1/8 Traxxas Sledge Monster Truck. Includes output cup (1)/ 2.5x12mm pin (1).

TRAXXAS

Traxxas Steel Differential Output Gears for E-Revo Brushless, 8683

These are the Steel Differential Output Gears for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Steel Front CV Driveshaft 5x133.5mm for Sledge 1/8 Monster Truck, 9558

This is the Steel Front Constant-Velocity Driveshaft for the 1/8 Traxxas Sledge Monster Truck. Includes (1) 5x133.5mm shaft.

TRAXXAS

Traxxas Steel Half Shaft External Splined Constant Velocity, 6750

This is the Traxxas Steel Half Shaft External Splined Constant Velocity for the XO-1 and Rally 10th Scale R/C Cars.

TRAXXAS

Traxxas Steel Outer Rear Suspension Pins for Sledge 1/8 Monster Truck, 9543

These are the Steel Outer Rear Suspension Pins for the 1/8 Traxxas Sledge Monster Truck. Includes 3.5x56.7mm pins (2)/ M3x0.5mm NL, flanged (2).

TRAXXAS

Traxxas Steel Pinion Gear 14T 32P fits 5mm shaft, 5640

This is the 14T 32P Hardened Steel Pinion Gear for use on the Summit, E-Revo Brushless or E-Maxx Brushless Traxxas Trucks.

TRAXXAS

Traxxas Steel Pinion Gear 18T 32P fits 5mm shaft, 5644

This is the 18T 32P Hardened Steel Pinion Gear for use on the Summit, E-Revo Brushless or E-Maxx Brushless Traxxas Trucks.

TRAXXAS

Traxxas Steel Pushrods for Revo & Summit, 5318

This is the pair of Steel Pushrods for the Traxxas Revo & Summit. These pushrods work with the long travel #TRA5356, or progressive rocker 1 #TRA5357, arm sets.FEATURES: Metal pushrod construction;...

TRAXXAS

Traxxas Steel Shock Shafts (32mm) for Ford GT & 4-Tec 2.0, 4262

These are the Traxxas Steel Shock Shafts (32mm) for the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars. Also works on Nitro 4-Tec.

TRAXXAS

Traxxas Steel Shock Shafts for 1/18 LaTrax, 7663

These are the Traxxas Steel Shock Shafts with Chrome Finish for the 1/18 LaTrax Teton Monster Truck and Desert Prerunner.

TRAXXAS

Traxxas Steel Stub Axles, 5454

This is a pair of replacement Stub Axles for the Revo and other specified Traxxas vehicles. The wheels attach to the axles.

TRAXXAS

Traxxas Steel Suspension Pin Set (front or rear) -Revo/Summit/Slayer, 5321

This is the Steel Suspension Pin Set for the Traxxas Revo, Slayer, & Summit. They are also commonly known as Hinge Pins.FEATURES: Steel construction; Polished finish.INCLUDES: Two Long Suspension...

TRAXXAS

Traxxas Steel Top Drive Gear (22-tooth), 3195

This is the 22 tooth, hardened steel top drive gear for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Steering and Throttle Servo Horns for non-Traxxas Servos, 5345X

These are the Steering and Throttle Servo Horns for non-Traxxas Servos, such as Hitec, JR, KO and Airtronics.

TRAXXAS

Traxxas Steering Arm Set 1/16 (upper & lower), 7043

Traxxas Steering Arm Set 1/16 (upper & lower). Includes the following:steering linkservo hornservo saverservo saver springservo horn mountball stud (2)shock mounts, front & rear2.5x18mm CS (4)

TRAXXAS

Traxxas Steering Bellcrank Set for Maxx 4S, 8946

This is the stock replacement Steering Bellcrank Set for the Traxxas Maxx 4S Monster Truck. Includes steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder...

TRAXXAS

Traxxas Steering Bellcranks - X-Maxx, 7746

These are the Traxxas Steering Bellcranks for the X-Maxx Monster Truck (7746). Includes steering bellcranks, bellcrank support, servo saver, servo saver spring, draglink, and 3x20mm shoulder screws...

TRAXXAS

Traxxas Steering Bellcranks for Ford GT, 4-Tec 2, UDR, 8343

These are the Traxxas Steering Bellcranks for the Ford GT, Mustang GT, 4-Tec 2.0, and Unlimited Desert Racer. Includes mounting hardware.

TRAXXAS

Traxxas Steering Bellcranks/Servo Saver for the 1/18 LaTrax Vehicles, 7538X

These are the Traxxas Steering Bellcranks and Servo Saver for the 1/18 LaTrax Teton, SST, & Rally Car. Includes bellcranks, servo saver, spring, spring retainer, posts, and draglink.