TRAXXAS

Traxxas Front Bumper with Support for Rustler 4X4, 6736

This is the Front Bumper with Support for the Rustler 4X4 XL-5 (brushed) and VXL (brushless) models.

TRAXXAS

Traxxas Rear Shock Tower for Rustler 4X4, 6738

This is the Rear Shock Tower for the Rustler 4X4 XL-5 and VXL models.

TRAXXAS

Traxxas Aluminum Front Shock Tower for Sledge 1/8 Monster Truck - Blue, 9539

This is the 6061-T6 Blue Aluminum Front Shock Tower for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Rear Bumper for Ford GT & 4-Tec 2.0, 8336

This is the Traxxas Rear Bumper for the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars. Includes rear body mount.

TRAXXAS

Traxxas Red Aluminum Center Driveshaft for Rustler 4X4, 6765R

This is the Red Aluminum Center Driveshaft (189mm) for the Rustler 4X4 XL-5 and VXL models.

TRAXXAS

Traxxas 1/16 Monster Jam Replica Wheels, 7266

This is a pair of Traxxas 1/16 Monster Jam Replica Wheels. They are dual profile (1.5'' outer and 2.2'' inner) (2).

TRAXXAS

Traxxas Battery Cups - XO-1, 6428

These are the Traxxas Battery Cups for the XO-1 4WD Supercar.

TRAXXAS

Traxxas Battery Hold-Downs - XO-1, 6426

These are the Traxxas Battery Hold-Downs for the XO-1 4WD Supercar.

TRAXXAS

Traxxas Bellcrank Brace/Draglink - XO-1, 6445

This is the Traxxas Bellcrank Brace/Draglink for the XO-1 4WD Supercar.

TRAXXAS

Traxxas Body Roof Skid Plate for Hoss 4x4 VXL, 9017

This is the Body Roof Skid Plate for the 1/10 Traxxas Hoss 4x4 VXL. Includes left and right pieces and 3x8mm CS (4).

TRAXXAS

Traxxas Bumpers Front and Rear for the 1/18 LaTrax, 7635

These are the Traxxas Bumpers Front and Rear for the 1/18 LaTrax Teton Monster Truck and Desert Prerunner.

TRAXXAS

Traxxas Caster Blocks C-Hubs for Sledge 1/8 Monster Truck, 9532

These are the Caster Blocks (C-Hubs), left and right, for the 1/8 Traxxas Sledge Monster Truck. Includes kingpin bushings (4).

TRAXXAS

Traxxas Center Bearing Carrier with Bushings - XO-1, 6457

This is the Center Bearing Carrier with Bushings for the new Traxxas XO-1 4WD Supercar.

TRAXXAS

Traxxas Center Differential Housing for Hoss 4x4 VXL, 9081

This is the Center Differential Housing for the 1/10 Traxxas Hoss 4x4 VXL. Includes x-ring gaskets (2)/ 5x10x0.5 PTFE-coated washer (1)/ 2.5x8 CCS (4).

TRAXXAS

Traxxas Chrome Bumper Push Bar for TRX-4 Ford Bronco, 8066

This is the Chrome Bumper Push Bar for the Traxxas TRX-4 Ford Bronco. Fits #8069 bumper.

TRAXXAS

Traxxas Digital Nano Servo for the DR-1 Helicopter, 6348

This is the Traxxas Digital Nano Servo for use with the DR-1 Helicopter.

TRAXXAS

Traxxas Exhaust Tube with Metal Retainer Strap, 3151

This is the Traxxas Exhaust Tube with Metal Retainer Strap.

TRAXXAS

Traxxas Gear/Motor Plate Access Cover for 1/16 w/550 motors, 7379R

This is the Traxxas Gear/Motor Plate Access Cover for 1/16 vehicles with 550 motors. Includes motor mount hinge post, 3x10mm CS w/split and flat washers (1), 2.5x4mm CS (2), 3x8mm BCS (1).

TRAXXAS

Traxxas Half Shafts Heavy Duty for Telluride 4x4, 6759

This is a set of Traxxas Heavy Duty Half Shafts for the Telluride 4x4 Extreme Terrain Truck. Includes external splined (2)/ internal splined (2))/ metal u-joints (4).

TRAXXAS

Traxxas Hex Wheel Hub Disc Brake Rotors for the Unlimited Desert Racer, 8569

These are the Hex Wheel Hub Disc Brake Rotors (4) for the Traxxas Unlimited Desert Racer.

TRAXXAS

Traxxas Housing Cush Drive Front and Rear Halves - XO-1, 6464

These are the Housing Cush Drive Front and Rear Halves for the Traxxas XO-1 4WD Supercar.

TRAXXAS

Traxxas Inner Fenders for TRX-4 Ford Bronco, 8072

These are the Inner Front and Rear Fenders for the Traxxas TRX-4 Ford Bronco. Includes fenders (2)/ rock light covers (8)/ battery plate/ 3x8 flathead screws (4).

TRAXXAS

Traxxas Main Frame Outer Side Plates Blue Anodized for the DR-1 Helicopter, 6328

These are the Traxxas Main Frame Outer Side Plates Blue Anodized for use with the DR-1 Helicopter.

TRAXXAS

Traxxas Rear Stub Axle Steel-Splined Constant Velocity, 9053X

This is the Steel-Splined Constant Velocity Rear Stub Axle for the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas Receiver Box Seal Kit - XO-1, 6425

This is the Traxxas Receiver Box Seal Kit for the XO-1 4WD Supercar. Includes o-ring, seals, and silicone grease.

TRAXXAS

Traxxas Shock Spring Red GTR for the 1/18 LaTrax Teton, 7666

This is the Traxxas Red GTR Shock Spring for the 1/18 LaTrax Teton Monster Truck.

TRAXXAS

Traxxas Steering Bellcranks for the Unlimited Desert Racer, 8543

These are the Steering Bellcranks for the Traxxas Unlimited Desert Racer. Includes servo saver/ servo saver spring/ servo spring retainer/servo horn, steering.

TRAXXAS

Traxxas Suspension Arms Upper and Lower Left Front Slayer, 5932

This is the Upper & Lower Left Front Suspension Arm Set for the Traxxas Slayer Pro 4WD Short Course Nitro RTR.

TRAXXAS

Traxxas Suspension Pins Front and Rear - XO-1, 6441

These are the Traxxas Suspension Pins Front and Rear for the XO-1 4WD Supercar. Includes tie bar bushings.

TRAXXAS

Traxxas Tailgate Panel Insert for TRX-4 Ford Bronco, 8077

This is the Tailgate Panel Insert for the Traxxas TRX-4 Ford Bronco. Clear, requires painting. Includes adhesive foam tape (2).

TRAXXAS

Traxxas Telemetry Temperature and Voltage Sensor, 6524

This is the Traxxas Telemetry Temperature and Voltage Sensor. Works with the Traxxas XO-1 4WD Supercar.

TRAXXAS

Traxxas Upper Main Gear and Outer Main Shaft for the DR-1 Helicopter, 6342

This is the Traxxas Upper Main Gear and Outer Main Shaft for use with the DR-1 Helicopter.

TRAXXAS

Traxxas Upper Suspension Arms for the Unlimited Desert Racer, 8531

These are the Upper Suspension Arms (left & right) for the Traxxas Unlimited Desert Racer. Comes assembled with hollow balls.

TRAXXAS

Traxxas 1/16 Summit Clear Body, 7211

This is the Clear Body for the Traxxas 1/16 Summit. Requires painting. Includes grill and lights decal sheet.

TRAXXAS

Traxxas 10-Tooth Pinion Gear for 1/18 LaTrax Trucks, 7645

This is the Traxxas 10-Tooth Pinion Gear for the 1/18 LaTrax Trucks. Includes set screw and one pinion gear.

TRAXXAS

Traxxas 12-T Pinion Gear for Sledge 1/8 Monster Truck, 6482X

This is the 12-Tooth Pinion Gear for the 1/8 Traxxas Sledge Monster Truck. It is 1.0 metric pitch. Fits 5mm shaft. Includes set screw.

TRAXXAS

Traxxas 2-Ch Receiver 27Mhz without BEC, 2019

This is the Traxxas 27mHz Two Channel AM Receiver Without BEC. For use with electronic speed control.

TRAXXAS

Traxxas 2.6x10mm Roundhead Self-Tapping Screws, 2673

This is a set of 6 Traxxas 2.6x10mm Roundhead Self-Tapping Screws.

TRAXXAS

Traxxas 2.6x5mm Button-Head Machine Screws (6) - Aton Quad, 7944

These are the Traxxas 2.6x5mm Button-Head Machine Screws (6) for the Aton Quad (7944).

TRAXXAS

Traxxas 20-Groove Middle Pulleys for Nitro 4-TEC, 4895

These are the replacement 20-Groove Middle Pulleys for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas 29T Pinion Gear - XO-1, 6492

This is the 29T Pinion Gear for the Traxxas XO-1 4WD Supercar (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft). Includes set screw.

TRAXXAS

Traxxas 3x20mm Countersunk Machine Hex Screws, 4857

These are the Traxxas 3x20mm Countersunk Machine Hex Screws.

TRAXXAS

Traxxas 3x21mm Button-Head Machine Screws, 4978

This is a 6-pack of 3X21mm Button-Head Screws for the Revo and several Traxxas R/C vehicles. These bolts are used to secure the brake calipers.

TRAXXAS

Traxxas 3x35mm Cap-Head Machine Screws for E-Revo Brushless, 3971

These are the 3x35mm Cap-Head Machine Screws (hex drive) for the new Traxxas Next Generation E-Revo Brushless. Includes 6 screws.

TRAXXAS

Traxxas 52-Tooth Steel Spur Gear for Sledge 1/8 Monster Truck, 9652

This is the 52-Tooth Steel Spur Gear (1.0 metric pitch) for the 1/8 Traxxas Sledge Monster Truck. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...

TRAXXAS

Traxxas 60-Tooth Spur Gear for 1/18 LaTrax Trucks, 7640

This is the Traxxas 60-Tooth Spur Gear for the 1/18 LaTrax Trucks.

TRAXXAS

Traxxas 62-T Spur Gear for Ford GT & 4-Tec 2.0, 8359

This is the Traxxas 62-Tooth Spur Gear for the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars.

TRAXXAS

Traxxas 9-Tooth Pinion Gear for 1/18 LaTrax Trucks, 7644

This is the Traxxas 9-Tooth Pinion Gear for the 1/18 LaTrax Trucks. Includes set screw and one pinion gear.

TRAXXAS

Traxxas Aluminum Ball Studs Jato 3.3, 5529X

These are the aluminum hard-anodized Teflon-coated Ball Studs for inner camber link mounting on the Traxxas Jato.

TRAXXAS

Traxxas Aluminum Center Driveshaft, 6755

This is the Aluminum Center Driveshaft for the Traxxas Stampede 4x4 monster truck.

TRAXXAS

Traxxas Aluminum Chassis Brace (T-Bar) for Sledge 1/8 Monster Truck - Red, 9523R

This is the Red Anodized 6061-T6 Aluminum Chassis Brace (T-Bar) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 SS (2).

TRAXXAS

Traxxas Aluminum Differential Carrier for E-Revo, 8681X

This is the Aluminum Differential Carrier for the new Traxxas Next Generation E-Revo. Includes x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 MW.

TRAXXAS

Traxxas Aluminum Steering Bellcrank Posts for Sledge 1/8 Monster Truck, 9525

These are the Blue Aluminum Steering Bellcrank Posts for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Anaconda 2.2" Wide Front Tires Bandit, 2479

This is the Anaconda 2.2" Soft Compound Wide Front Tire Set with foam inserts for the Traxxas Bandit vehicle.

TRAXXAS

Traxxas Anti-Vibration Damper Balls - Aton Quad, 7972

This is the Traxxas Anti-Vibration Damper Balls for the Aton Quad (7972). Gimbal (4) (yellow dot)/ camera mount (4).

TRAXXAS

Traxxas Axle Carriers Left and Right for use with larger 6x13mm ball bearings., 5334R

These are Axle Carriers, left and right, for use with larger 6x13mm ball bearings. Includes bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)

TRAXXAS

Traxxas Ball Bearings (blue rubber sealed, 4x8x3mm), 7019

These are the 4x8x3mm Rubber Sealed Ball Bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

TRAXXAS

Traxxas Ball Bearings, 5x8x2.5mm (2), 2728

These are the 5x8x2.5mm bearings for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Battery Compartment Vent and Latch, 5628

Traxxas Battery Compartment Vent and Latch. Fits either left or right side.

TRAXXAS

Traxxas Battery Hold Down for Rustler 4X4, 6725

This is the Battery Hold Down for the Rustler 4X4 XL-5 and VXL models.