TRAXXAS

Traxxas 2-Ch Receiver 27Mhz without BEC, 2019

This is the Traxxas 27mHz Two Channel AM Receiver Without BEC. For use with electronic speed control.

TRAXXAS

Traxxas 2.6x10mm Roundhead Self-Tapping Screws, 2673

This is a set of 6 Traxxas 2.6x10mm Roundhead Self-Tapping Screws.

TRAXXAS

Traxxas 2.6x5mm Button-Head Machine Screws (6) - Aton Quad, 7944

These are the Traxxas 2.6x5mm Button-Head Machine Screws (6) for the Aton Quad (7944).

TRAXXAS

Traxxas 2.8" Black RTX Wheels for Rustler 4X4, 6772

These are 2.8" Black RTX Wheels for the Rustler 4X4 XL-5 and VXL models.

TRAXXAS

Traxxas 20-Groove Middle Pulleys for Nitro 4-TEC, 4895

These are the replacement 20-Groove Middle Pulleys for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas 24T Steel Pinion Gear - X-Maxx, 6496X

This is the Traxxas 24-T Pinion Gear for the X-Maxx Monster Truck (6496X). Hardened steel for use with steel spur gears. Has 1.0 metric pitch and fits 5mm shaft. Includes set screw.

TRAXXAS

Traxxas 29T Pinion Gear - XO-1, 6492

This is the 29T Pinion Gear for the Traxxas XO-1 4WD Supercar (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft). Includes set screw.

TRAXXAS

Traxxas 30cc Marine Grease for Spartan and M41, 5748

Traxxas 30cc Marine Grease for the Spartan and M41 Catamaran Race Boats.

TRAXXAS

Traxxas 3mm Hardened Grub Screw Set (12), 2743

This is the 3mm Hardened Grub Screw Set (12-pc) from Traxxas.

TRAXXAS

Traxxas 3x10mm Countersunk Machine Hex Screws, 2551

These are the Traxxas Countersunk 3 x 10mm Screws.

TRAXXAS

Traxxas 3x20mm Countersunk Machine Hex Screws, 4857

These are the Traxxas 3x20mm Countersunk Machine Hex Screws.

TRAXXAS

Traxxas 3x21mm Button-Head Machine Screws, 4978

This is a 6-pack of 3X21mm Button-Head Screws for the Revo and several Traxxas R/C vehicles. These bolts are used to secure the brake calipers.

TRAXXAS

Traxxas 3x35mm Cap-Head Machine Screws for E-Revo Brushless, 3971

These are the 3x35mm Cap-Head Machine Screws (hex drive) for the new Traxxas Next Generation E-Revo Brushless. Includes 6 screws.

TRAXXAS

Traxxas 3x40mm Button-Head Machine Screws Hex Drive, 2592

These are the Traxxas Button-Head 3 x 40mm Screws.

TRAXXAS

Traxxas 4x12mm Countersunk Machine Hex Screws, 2542

These are the Traxxas Countersunk 4 x 12mm Screws.

TRAXXAS

Traxxas 4x15mm Countersunk Machine Hex Screws, 2546

These are the Traxxas Countersunk 4 x 15mm Screws.

TRAXXAS

Traxxas 4x22mm Button-Head Machine Screws (hex) - X-Maxx, 2597

These are the Traxxas 4x22mm Button-Head Machine Screws (hex) for the X-Maxx Monster Truck (2597). Includes 6 screws.

TRAXXAS

Traxxas 52-Tooth Steel Spur Gear for Sledge 1/8 Monster Truck, 9652

This is the 52-Tooth Steel Spur Gear (1.0 metric pitch) for the 1/8 Traxxas Sledge Monster Truck. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...

TRAXXAS

Traxxas 55-T Spur Gear for 4-Tec 2.0 VXL, 8358

This is the Traxxas 55-Tooth Spur Gear for the 4-Tec 2.0 VXL AWD Chassis Car.

TRAXXAS

Traxxas 60-Tooth Spur Gear for 1/18 LaTrax Trucks, 7640

This is the Traxxas 60-Tooth Spur Gear for the 1/18 LaTrax Trucks.

TRAXXAS

Traxxas 62-T Spur Gear for Ford GT & 4-Tec 2.0, 8359

This is the Traxxas 62-Tooth Spur Gear for the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars.

TRAXXAS

Traxxas 9-Tooth Pinion Gear for 1/18 LaTrax Trucks, 7644

This is the Traxxas 9-Tooth Pinion Gear for the 1/18 LaTrax Trucks. Includes set screw and one pinion gear.

TRAXXAS

Traxxas Air Filter (w/rubber base & foam insert), 4060

This is the Air Filter for Traxxas Nitro Powered Vehicles. This Filter fits over the carburetor and prolongs engine life by preventing dirt from entering engine.FEATURES: Constructed of black rubber...

TRAXXAS

Traxxas Aluminum Ball Studs Jato 3.3, 5529X

These are the aluminum hard-anodized Teflon-coated Ball Studs for inner camber link mounting on the Traxxas Jato.

TRAXXAS

Traxxas Aluminum Center Driveshaft for Maxx 4S, 8955

This is the Aluminum Center Driveshaft for the Traxxas Maxx 4S Monster Truck.

TRAXXAS

Traxxas Aluminum Center Driveshaft, 6755

This is the Aluminum Center Driveshaft for the Traxxas Stampede 4x4 monster truck.

TRAXXAS

Traxxas Aluminum Chassis Brace (T-Bar) for Sledge 1/8 Monster Truck - Red, 9523R

This is the Red Anodized 6061-T6 Aluminum Chassis Brace (T-Bar) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 SS (2).

TRAXXAS

Traxxas Aluminum Differential Carrier for E-Revo, 8681X

This is the Aluminum Differential Carrier for the new Traxxas Next Generation E-Revo. Includes x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 MW.

TRAXXAS

Traxxas Aluminum Steering Bellcrank Posts for Sledge 1/8 Monster Truck, 9525

These are the Blue Aluminum Steering Bellcrank Posts for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Aluminum Steering Blocks (Pink), 3636P

Add custom style and increase durability with these premium upgrades! Traxxas aluminum accessories improve the appearance, ruggedness, and control of the officially-licensed Grave Digger model, and...

TRAXXAS

Traxxas Anaconda 2.2" Wide Front Tires Bandit, 2479

This is the Anaconda 2.2" Soft Compound Wide Front Tire Set with foam inserts for the Traxxas Bandit vehicle.

TRAXXAS

Traxxas Anti-Squat Wedges (1.5 & 3.0 degree) (2), 1934

This Pro Series Rake is for use under the front bulkhead to increase rake angle. It can also be used with the Pro Series transmission to increase or decrease anti-squat geometry in the rear.

TRAXXAS

Traxxas Anti-Vibration Damper Balls - Aton Quad, 7972

This is the Traxxas Anti-Vibration Damper Balls for the Aton Quad (7972). Gimbal (4) (yellow dot)/ camera mount (4).

TRAXXAS

Traxxas Axle Carriers 1/16 (left & right), 7034

These are the Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Axle Carriers Left and Right for use with larger 6x13mm ball bearings., 5334R

These are Axle Carriers, left and right, for use with larger 6x13mm ball bearings. Includes bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)

TRAXXAS

Traxxas Ball Bearing Black Rubber Sealed (20x27x4mm) (2) - X-Maxx, 5182A

These are the Black Rubber Sealed Traxxas Ball Bearings (20x27x4mm) for the new X-Maxx Monster Truck (5182A). Includes 2 bearings.

TRAXXAS

Traxxas Ball Bearings (10x15x4mm, black rubber sealed), 5119A

These are the Black Rubber-Sealed 10x15x4mm Ball Bearings for several specified Traxxas vehicles.

TRAXXAS

Traxxas Ball Bearings (15x21x4mm, black rubber sealed), 5102A

These are the Black Rubber-Sealed 15x21x4mm Ball Bearings for several specified Traxxas vehicles.

TRAXXAS

Traxxas Ball Bearings (blue rubber sealed, 4x8x3mm), 7019

These are the 4x8x3mm Rubber Sealed Ball Bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

TRAXXAS

Traxxas Ball Bearings 5x10x4mm, 4609

This is a replacement set of 5x10x4mm ball bearings for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Ball Bearings, 5x8x2.5mm (2), 2728

These are the 5x8x2.5mm bearings for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Battery Box Cover/Rear Bumper Jato 3.3, 5515X

This is the Battery Box Cover/Rear Bumper for the Traxxas Jato 3.3. Includes battery case with bosses for wheelie bar, cover, and foam pad.

TRAXXAS

Traxxas Battery Compartment Door 1/16 (fits right or left side), 7026

This is the Battery Compartment Door and Vents for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Battery Compartment Vent and Latch, 5628

Traxxas Battery Compartment Vent and Latch. Fits either left or right side.

TRAXXAS

Traxxas Battery Hold Down for Rustler 4X4, 6725

This is the Battery Hold Down for the Rustler 4X4 XL-5 and VXL models.

TRAXXAS

Traxxas Battery Hold Down Retainer - for Taller Multi-Cell Batteries, 6727X

This is the special Battery Hold Down Retainer, Battery Post, and Angled Body Clip that allows for the installation of taller, multi-cell batteries in the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Battery Hold Downs - X-Maxx, 7719

These are the Traxxas Battery Hold Downs for the X-Maxx Monster Truck (7719). Includes (2) foam pads.

TRAXXAS

Traxxas Battery Hold Downs Tall for 1/10 Rally VXL Car, 7426X

These are the Traxxas Battery Hold Downs Tall for the Rally 10th Scale R/C Car.

TRAXXAS

Traxxas Battery Hold-Down and Mounts for Maxx 4S, 8919

These are the Battery Hold-Down Setup with Mounts for the Traxxas Maxx 4S Monster Truck. Includes battery compartment spacers and foam pads.

TRAXXAS

Traxxas Battery Hold-Down for Hoss 4x4 VXL, 9026

This is the Battery Hold-Down for the 1/10 Traxxas Hoss 4x4 VXL. Includes battery clip/ hold-down post/ screw pin/ pivot post screw.

TRAXXAS

Traxxas Battery Hold-Down Retainer Tall - XO-1, 6427X

This is the Traxxas Battery Hold-Down Retainer Tall for the XO-1 4WD Supercar. Allows for installation of taller, multi-cell batteries.

TRAXXAS

Traxxas Bearing Needle Roller 6x10x8mm, 5121

This is the Needle Roller Bearing Set for the Forward/Reverse Output Gears on the Traxxas Revo series and Slayer.

TRAXXAS

Traxxas Bellcrank Bushings (plastic, 4x7x2.5mm), 5123

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck and 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Big Bore Short Shocks (front, w/springs), 2658

These are short big bore front shocks with springs by Traxxas for use on the Nitro 4-TEC. They are hard-anodized & Teflon-coated T6 aluminum. Assembled with TiN shafts w/springs)(f/r)(2) Note:...

TRAXXAS

Traxxas Bigfoot No. 1 Body Accessories Kit, 3662

This is the Traxxas Bigfoot No. 1 Original Body Accessories Kit. Includes winch, front and rear bumpers, roll bar, light bar, engine detail, & mounting hardware (grill sold separately).

TRAXXAS

Traxxas Black Camber Link Set (front & rear), 3641

This is the Black Camber Link Set (non-adjustable) for the Traxxas Rustler & Stampede XL-5. Includes front and rear.

TRAXXAS

Traxxas Black Jack for the TRX-4, 8023T

This is the Black Jack for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit. Includes jack (1)/ 2x8 BCS (1).

TRAXXAS

Traxxas Black Lower Chassis for Slash 2WD Low-CG Conversion Kit, 5831

This is the optional Traxxas Black Lower Chassis for the new Slash 2WD Low-CG Conversion Kit.

TRAXXAS

Traxxas Black Rear Springs (2), 3757

These are the Traxxas Black Rear Springs (2).

TRAXXAS

Traxxas Black Rear Springs Bandit, 2457

These are the Black Rear Springs for the Traxxas Bandit.