TRAXXAS

Traxxas Engine Mount Jato 3.3, 5560

This is the Engine Mount and Hardware for the Traxxas Nitro Jato Stadium Truck.

TRAXXAS

Traxxas Engine Mount Machined Aluminum T-Maxx, 4960X

This is the Optional Aluminum Engine Mount for the Traxxas Nitro T-Maxx.

TRAXXAS

Traxxas Engine Mount Nitro 4-TEC, 4860

This is the Stock Replacement Engine Mount for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas EVX-2 Electronic Speed Control with LVD (waterproof, land, fwd/rev), 3019R

For 16.8-Volt Dual-Battery Dual-Motor Setups!EVX-2™ Waterproof FWD/REV ESCwith Low Voltage Detection (LVD)   The EVX-2 delivers an incredible 16-plus volts, from two battery packs, making 16.8-volt,...

TRAXXAS

Traxxas EVX2 Forward/Reverse Marine ESC, 3020

This is the EVX2 Foward/Reverse Marine Speed Control from Traxxas.

TRAXXAS

Traxxas Exhaust Header (Nitro Stampede), 4150

This is an exhaust header used on the TRAXXAS STAMPEDE truck w/.12 engine.INCLUDES: (1) Header; (1) Pressure fitting; (1) Gasket for pressure fittingSPECS: Distance between mounting holes - 27.5mm...

TRAXXAS

Traxxas Exhaust Pipe Hangar Nitro Rustler, 4453

This is the Exhaust Pipe Hangar for the Traxxas Nitro Rustler. For side exhaust engines only.

TRAXXAS

Traxxas ExoCage Side Rails/Hardware, 5619

These are the ExoCage Side Rails and Hardware for use on the Traxxas Summit Truck RTR.

TRAXXAS

Traxxas ExoCage Summit, 5620

This is the ExoCage for use on the Traxxas Summit Truck RTR. Includes all parts and hardware for 1 complete roll cage.

TRAXXAS

Traxxas Exocarbon Wing with Mounts - XO-1, 6414G

This is the Exocarbon Wing with wing mounts and washers for the new Traxxas XO-1 4WD Supercar. 6416

TRAXXAS

Traxxas Extended Rod Ends for TRX-4 Long Arm Lift Kit, 8149

These are the Extended Rod Ends for the Traxxas TRX-4 Long Arm Lift Kit (8140). Includes standard (4)/ angled (4)/ hollow balls (8).

TRAXXAS

Traxxas Extra Long Wheelie Bar for Drag Slash, 9460

This is the Wheelie Bar for the 1/10 Traxxas Drag Slash. Developed for the Drag Slash, this extra-long wheelie bar features 5 height positions and two wheel sizes for maximum customization. Two...

TRAXXAS

Traxxas Extreme Heavy-Duty Upgrade Kit for Slash/Hoss/Rustler 4X4 - Red, 9080R

This is the Red Extreme Heavy-Duty Upgrade Kit for the 1/10 Traxxas Rustler 4X4, Hoss 4X4, and Slash 4X4 models, including the Slash Ultimate.   The Extreme Heavy-Duty Upgrade Kit transforms...

TRAXXAS

Traxxas EZ Start 2 Housing Set, inner/outer, 5275

This is the EZ Start 2 Housing Set (inner/outer). Includes 3x12mm BCS (5) / 3x20 BCS (1) / motor bushing.

TRAXXAS

Traxxas EZ-Start Gear Set/Shafts, 4576

These are Replacement Gears and Shafts for the Traxxas EZ-Start System.

TRAXXAS

Traxxas Fender Flairs Front/Rear Summit, 5617

These are the Front and Rear Fender Flairs for use on the Traxxas Summit Truck RTR.

TRAXXAS

Traxxas Fender Flares for the TRX-4, 8017

These are the Fender Flares (front & rear) for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit. Includes 2 each.

TRAXXAS

Traxxas Fiberglass Tie Bar for Nitro 4-TEC, 4832

This is the Fiberglass Tie Bar for the Nitro 4-TEC from Traxxas.

TRAXXAS

Traxxas Fixed Gear Adapter, 3790

This is the Fixed Gear Adapter for several specified Traxxas R/C vehicles. Made from black molded nylon. Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear...

TRAXXAS

Traxxas Flywheel Nut, 5244

This is a Replacement Flywheel Nut from Traxxas. Fits the Traxxas 2.5, 2.5R and 3.3 engines.

TRAXXAS

Traxxas Flywheel, 30mm steel w/pins (Jato), 4142R

This is an optional 30mm Flywheel with Pins.FEATURES: Knurled design for easy gripping by rubber starter wheels; Two pin steel construction; Vent holes drilled to keep clutch shoes cooler

TRAXXAS

Traxxas Flywheel, 40mm Silver Anodized, 4142X

This is an optional Large Knurled Flywheel (40mm) for use with Starter Boxes.FEATURES: Large knurles to be gripped by rubber starter wheels; Two pin aluminum construction; Vent holes drilled to keep...

TRAXXAS

Traxxas Foam Body Bumper - XO-1, 6437

This is the Traxxas Foam Body Bumper for the XO-1 4WD Supercar.

TRAXXAS

Traxxas Foam Body Bumper Nitro 4-TEC, 4835

This is the Foam Bumper for the Nitro 4-TEC from Traxxas.

TRAXXAS

Traxxas Fox Edition Body for the Unlimited Desert Racer, 8513

This is the Fox Edition Body for the Traxxas Unlimited Desert Racer. Includes decal sheet.

TRAXXAS

Traxxas Front and Rear Differential Housings, 5380

These are the Front and Rear Differential Housings for the Traxxas Revo and Slayer.

TRAXXAS

Traxxas Front Bearing Block for Nitro 4-TEC, 4827

This is the replacement Front Bearing Block (4827) for the Traxxas Nitro 4-TEC. Supports front shaft. Includes belt tension adjustment shims (front/ middle)/ screws.

TRAXXAS

Traxxas Front Bulkhead and Tie Bar Bushings - XO-1, 6430

This is the Traxxas Front Bulkhead and Tie Bar Bushings for the XO-1 4WD Supercar.

TRAXXAS

Traxxas Front Bulkheads Blue Machined 6061-T6 Aluminum, 4930X

These are the left & right Blue Machined 6061-T6 Aluminum Front Bulkheads for use with the Traxxas E-Maxx and T-Maxx 3.3. This part requires use of 4939X suspension pins.

TRAXXAS

Traxxas Front Bumper - X-Maxx, 7735

This is the Traxxas Front Bumper for the X-Maxx Monster Truck (7735).

TRAXXAS

Traxxas Front Bumper 4-Tec, 4335

This is the Direct Replacement Front Bumper for the Traxxas Electric and Nitro 4-TEC.

TRAXXAS

Traxxas Front Bumper and Mount Black - Monster Jam, 3621

This is the Black Front Bumper and Mount for the Traxxas Monster Jam Trucks. Includes 4x23mm RM (2)/ 3x10mm RST (2).

TRAXXAS

Traxxas Front Bumper Mount and Support - X-Maxx, 7733

This is the Traxxas Front Bumper Mount and Support for the X-Maxx Monster Truck (7733).

TRAXXAS

Traxxas Front Chrome Bumper and Mount BL E-Revo, 5335A

This is an optional Front Chrome Bumper and Mount for the Traxxas Brushless E-Revo.

TRAXXAS

Traxxas Front Drive Belt for Nitro 4-TEC, 4861

This is the replacement Front Drive Belt (4.5mm width, 76-groove HTD) for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas Front Driveshaft Steel-Spline Constant Velocity - XO-1, 6451

This is the Traxxas Steel-Spline Constant Velocity Front Driveshaft for the XO-1 4WD Supercar. Includes the complete assembly.

TRAXXAS

Traxxas Front Hard Steel Shock Shafts (29mm) for Ford GT & 4-Tec 2.0, 4261T

These are the Traxxas Front Hardened Steel Shock Shafts (29mm) with Titanium Nitride Coating for the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars. Also works on Nitro 4-Tec.These hardened,...

TRAXXAS

Traxxas Front Machined Differential Ring and Pinion Gears, 5379R

This is the Front Machined Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3, Slash, and other specified Traxxas R/C vehicles. Spiral cut machined.

TRAXXAS

Traxxas Front Pink Springs (2), 3758P

These are the Traxxas Front Pink Springs (2) used on several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Front Portal Drive Input Gear for TRX-4, 8064

This is the Machined Front Portal Drive Input Gear for the Traxxas TRX-4. Works left or right side. Requires #8060 front axle shaft.

TRAXXAS

Traxxas Front Pulley Shaft Blue Aluminum 4-TEC, 4894X

This is the Blue Aluminum Front Pulley Shaft for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Front Pulley Shaft for Nitro 4-Tec, 4894

This is the Front Pulley Shaft for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Front Red Springs (2), 3758R

These are the Traxxas Front Red Springs (2) used on several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Front Shock Tower - Jato, 5518

This is the Front Shock Tower for the Traxxas Jato.

TRAXXAS

Traxxas Front Shock Tower Fiberglass Nitro Rustler, 2518

This is the replacement front fiberglass shock tower for the Traxxas Nitro Rustler. Requires part #2669.

TRAXXAS

Traxxas Front Springs White Slash, 5857

These are the Front Shock Springs for the Traxxas Slash.

TRAXXAS

Traxxas Front Steel Shock Shafts (29mm) for Ford GT & 4-Tec 2.0, 4261

These are the Traxxas Front Steel Shock Shafts (29mm) for the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars. Also works on Nitro 4-Tec.

TRAXXAS

Traxxas Front Suspension Arm Set for 1/16 Slash, 7031

This is the Front Suspension Arm Set for use on the Traxxas 1/16 Slash VXL 4WD RTR.

TRAXXAS

Traxxas Front Tires with Foam Inserts - NHRA Funny Car, 6971

These are the Traxxas Front Tires with Foam Inserts for the NHRA R/C Funny Car.

TRAXXAS

Traxxas Front Victory Tires 2.8" with Foam Inserts, 5571

This is a pair of Front Victory Tires for the Traxxas Nitro Jato 3.3 Stadium Truck.

TRAXXAS

Traxxas Front White GTR Shock Spring 0.7 Rate Yellow, 5427

This is the White GTR Shock Spring Front (0.7 rate Yellow) for the Traxxas Nitro Jato 3.3 Stadium Truck.

TRAXXAS

Traxxas Front White GTR Shock Spring 0.9 Rate Orange, 5428

This is the White GTR Shock Spring Front (0.9 rate Orange) for the Traxxas Nitro Jato 3.3 Stadium Truck.

TRAXXAS

Traxxas Front/Rear Pulleys 15-Groove for Nitro 4-Tec, 4896

These are the replacement 15-Groove Front and Rear Pulleys for the Traxxas Nitro 4-TEC. Includes flanges (2)/ axle pins (2).

TRAXXAS

Traxxas Front/Rear Sway Bar Set 4-TEC, 4875

This is the Front/Rear Sway Bar Set for the Traxxas 4-TEC.

TRAXXAS

Traxxas Fuel Filler Bottle Rebuild Kit, 5001R

This is the Traxxas Fuel Filler Bottle Rebuild Kit. Includes bottle lid (1) and dispensing tube caps, rubber (2) (fits 8mm or 5/16'' dispensing tube).

TRAXXAS

Traxxas Fuel Tank 150cc Complete, 5363X

This is a 5.1oz (150cc) Complete Fuel Tank from Traxxas.

TRAXXAS

Traxxas Fuel Tank Box Holder and Throttle Servo Mount Grey, 4432A

This is the Grey Fuel Tank Box Holder for the Traxxas Nitro Rustler. This part also holds the throttle servo.

TRAXXAS

Traxxas Fuel Tank Cap Exo-Carbon Finish Jato 3.3, 5547G

This is the optional Exo-Carbon Fuel Tank Cap for the Traxxas Nitro Jato 3.3 Stadium Truck.

TRAXXAS

Traxxas Fuel Tank Rebuild Kit Jato 3.3, 5549

This is the Fuel Tank Rebuild Kit for the Traxxas Nitro Jato Stadium Truck. Includes o-ring, grommets (2), cap spring, hardware.

TRAXXAS

Traxxas Fuel Tank Rebuild Kit, 5376

This is the Fuel Tank Rebuilt Kit for the REVO and Slayer from Traxxas. Includes mounting post, grommets (2), tank guard, mounting clips (2), cap o-ring, cap o-ring retainer, cap pull ring, spring,...