TRAXXAS

Traxxas Exhaust Tip (rubber, Nitro Stampede), 4154

This is the Exhaust Tip for the Traxxas Nitro Stampede Monster Truck.These Tips are installed on either end of the muffler to direct the exhaust to the rear of the vehicle.

TRAXXAS

Traxxas EZ Start 2 Complete Control Box, 5280

This is the Traxxas EZ Start 2 Complete Control Box.

TRAXXAS

Traxxas Foam Air Filter Inserts, pre-oiled (3), 5261

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 and 3.3 engine.

TRAXXAS

Traxxas Front 5-Spoke Chrome Wheels - NHRA Funny Car, 6974

These are the Traxxas Front 5-Spoke Chrome Wheels for the NHRA R/C Funny Car.

TRAXXAS

Traxxas Fuel Line 1', 3147

This is the stock replacement fuel tubing for the Traxxas 1/10 scale engine powered kits.

TRAXXAS

Traxxas Gearbox halves (l&r) (gray) w/ idler gear shaft, 3691A

These are the Traxxas gray Gearbox Halves (left & right) with idler gear shaft

TRAXXAS

Traxxas Gearbox Housing and Motor Plate for the 1/18 LaTrax Vehicles, 7590X

This is the Traxxas Gearbox Housing and Motor Plate for the 1/18 LaTrax Teton Monster Truck, SST Super Stadium Truck, and Rally Car.

TRAXXAS

Traxxas Green Assembled Wheelie Bar - Monster Jam, 3678A

This is the Green Assembled Wheelie Bar for the Traxxas Monster Jam Trucks. Also fits Stampede, Rustler and Bandit series.

TRAXXAS

Traxxas Green Bumpers Front and Rear with Supports - 1/16 Monster Jam, 7236A

These are the Traxxas Green Bumpers Front and Rear with Supports for the 1/16 Monster Jam Grave Digger.

TRAXXAS

Traxxas GTR Shock Rebuild Kit, 5462

This is the GTR Shock Rebuild Kit for the Traxxas Revo and Slayer. Includes x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends. Renews 2 shocks.

TRAXXAS

Traxxas Heavy Duty 18-T Pinion Gear (32-pitch), 3948X

This is a 18-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Hex Wheel Hubs and Axle Pins (2.5x12mm), 4954

This is the Set of Hex Wheel Hubs for the Traxxas T and E-Maxx 4WD RTR Monster Trucks. These wheel hubs fit on the end of the stub axles.

TRAXXAS

Traxxas Main Frame Lower Black with Screws for the LaTrax Alias Quad-Copter, 6624

This is the Traxxas Main Frame Lower Black with Screws for the LaTrax Alias Quad-Copter. Includes 1.6x5mm BCS selftapping screws (4).

TRAXXAS

Traxxas Maxx Tires 6.3" Geode Chrome Wheels (assembled, glued, fits E-Maxx Brushless) (17mm Hex), 5674

This is a pair of 6.3" Tires and Geode Chrome 17mm Hex Wheels for the Traxxas E-Maxx Brushless Edition Truck. Use with 17mm splined wheel hubs & nuts, part #5353X & beadlock-style sidewall...

TRAXXAS

Traxxas Oil-Filled Shocks Assembled with Springs (2) for the 1/18 LaTrax, 7660

These are the Traxxas Oil-Filled Shocks Assembled with Springs for the 1/18 LaTrax Teton Monster Truck.

TRAXXAS

Traxxas Pinion Gear 14-tooth for 1/18 LaTrax, 7592

This is the Traxxas Pinion Gear 14-tooth for the 1/18 LaTrax Rally Car and Desert Prerunner. Includes set screw.

TRAXXAS

Traxxas Power Switch for the DR-1 Helicopter, 6336

This is the Traxxas Power Switch for use with the DR-1 Helicopter.

TRAXXAS

Traxxas Primary Gears T-Maxx, 4995

This is the Replacement Primary Gear Set for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This gear set is installed on the primary gear shaft in the transmission.

TRAXXAS

Traxxas Propeller Right 4.0mm GS w/set screw, 1583

This is the Right Prop for the Traxxas Villain EX.

TRAXXAS

Traxxas Rear Bumper and Battery Box for Nitro Slash, 4429

This is the Traxxas Rear Bumper and Battery Box for the 10th scale Nitro Slash SCT. Includes battery box/ box cover/ switch cover/ body clip/ 3x15mm RM (2)/ 3x12mm CM (2).

TRAXXAS

Traxxas Rear Shock Tower 4-TEC, 4317

This is the Rear Shock Tower for the Traxxas Nitro and Electric 4-Tec Four Wheel Drive On-Road Sedan.

TRAXXAS

Traxxas Rear Shock Tower 4x4, 6838

This is the Rear Shock Tower for the Traxxas Slash and Stampede 4x4.

TRAXXAS

Traxxas Rod Ends with Hollow Balls - 1/16 Monster Jam, 7059

These are the Traxxas Rod Ends with Hollow Balls for the 1/16 Monster Jam truck.

TRAXXAS

Traxxas Rubber Plug/Charge Jack/2-Speed Adjustment Jato 3.3, 5583

This is the Rubber Plug and Charge Jack for the Traxxas Nitro Jato Stadium Truck.

TRAXXAS

Traxxas Rustler VXL Unpainted ProGraphix Body, 3715

Traxxas Rustler VXL Unpainted ProGraphix Body w/printed graphics (replacement for the painted body. Requires paint & final color application). Includes decals, wing & aluminum hardware.

TRAXXAS

Traxxas Screws, 3x6mm flat-head machine (hex) (6), 3932

These are the 3x6mm Flathead Machine Screws used on several Traxxas vehicles.FEATURES: Constructed of steel, black in colorINCLUDES: Six 3x6mm Flathead Machine Screws

TRAXXAS

Traxxas Screws, 4x16mm button-head machine (hex) (6), 3933

These are the 4x16mm Button Head Machine Screws from Traxxas.FEATURES: For use in the Traxxas Revo and also anywhere a screw this size is required. Steel construction, black in color.INCLUDES: Six...

TRAXXAS

Traxxas SCT Off-Road Racing Tires/SCT Red Wheels, 7674R

These are the SCT Off-Road Tires and Red Wheels for use on the LaTrax SST and Desert Prerunner 1/18 4WD RTR.

TRAXXAS

Traxxas Servo High-Torque for T-Maxx and E-Maxx, 2055

This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx or any other vehicle that you would like to mount this in. This part goes between the receiver and hooks to the steering or...

TRAXXAS

Traxxas Steel CV Driveshaft for the Unlimited Desert Racer, 8550

This is the Steel Constant-Velocity Driveshaft (96mm) for the Traxxas Unlimited Desert Racer.

TRAXXAS

Traxxas Steel Outer Front Suspension Pins for Sledge 1/8 Monster Truck, 9542

These are the Steel Outer Front Suspension Pins for the 1/8 Traxxas Sledge Monster Truck. Includes 3.5x48.2mm pins (2)/ M3x0.5mm NL, flanged (2).

TRAXXAS

Traxxas Steering Arms (upper & lower), 5344

This is the Upper & Lower Steering Arm (incorporates the servo saver) for the Slayer from Traxxas.FEATURES: Steel & black nylon constructionINCLUDES: Steering arm w/incorporated servo saver, servo...

TRAXXAS

Traxxas Stub Axle for E-Revo Brushless, 8653

This is the Stub Axle for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas Suspension Screw Pin Set, steel (hex drive), 3640

This is the suspension screw pin set (steel, hex drive) (requires part #2640 for a complete suspension pin set) for the Rustler, Stampede, Bandit, Slash.

TRAXXAS

Traxxas Talon Tires and Gemini Black Chrome Wheels for 1/16, 7174A

These are the Traxxas Talon Tires Pre-Mounted on Gemini Black Chrome Wheels for the E-Revo 1/16 and other specified 1/16 Traxxas models.

TRAXXAS

Traxxas Talon Tires/All-Star Chrome 2.8" Wheels/Foam Inserts (nitro Stampede front), 4171

These are a set of Traxxas 2.8" Mounted All Star Front Wheels and Tires for the front of the Nitro Stampede or Rustler.

TRAXXAS

Traxxas Talon Tires/All-Star Wheels Assembled (2.8") (nitro rear/ electric front), 3669

Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Talon tires, foam inserts) (nitro rear/ electric front) (2)

TRAXXAS

Traxxas Titan 550 Reverse Rotation Motor (21-turns/14 volts), 3975R

This is the Titan 550 Reverse Rotation Motor for the E-Maxx & other Traxxas Trucks.

TRAXXAS

Traxxas Waterproof Electronic Speed Control for 1/18 LaTrax Vehicles, 3045R

This is the Traxxas Waterproof Electronic Speed Control for the 1/18 LaTrax vehicles that use the black Traxxas connector. Do not purchase this ESC if you have a model using the white molex...

TRAXXAS

Traxxas Wing and Washer for Sledge 1/8 Monster Truck - Black, 9517

This is the Black Wing and Wing Washer for the 1/8 Traxxas Sledge Monster Truck. Includes 4x12mm FCS (2).

TRAXXAS

Traxxas Wire Harness for #3475 Cooling Fan on Sledge 1/8 Monster Truck, 3478

This is the Wire Harness for the #3475 Cooling Fan used on the 1/8 Traxxas Sledge Monster Truck. Replacement wire harness for the 3476 cooling fan kit.

TRAXXAS

Traxxas Wrist Pin and Clips TRX 3.3, 5291

These are the Wrist Pin and Clips for the Traxxas TRX 3.3 engine.

TRAXXAS

Traxxas Battery Tray Expansion Kit (Rustler, Bandit, Stampede), 3725X

This is the Battery Tray Expansion Kit, which allows for installation of taller multi-cell battery packs in the Traxxas Rustler, Bandit, and Stampede.

TRAXXAS

Complete BEC Kit for Traxxas High Torque Servos Used on the TRX-4, 2262

This is the Complete BEC Kit to be used when installing Traxxas High Torque Servos (2250 & 2255) on the Traxxas TRX-4. Includes receiver box cover and seals.

TRAXXAS

Traxxas 1/16 GTR Shock Springs (4.3 rate, black), 7342

These are the GTR Shock Springs (4.3 rate, black) for the Traxxas 1/16 Ford Fiesta.

TRAXXAS

Traxxas 1/16 Monster Jam Replica Tires, 7267

This is a pair of Traxxas 1/16 Monster Jam Replica Tires. They are dual profile (1.5'' outer and 2.2'' inner) (2).

TRAXXAS

Traxxas 1/16 Rally Satin Chrome Wheels, 7371A

These are the 1/16 Rally Satin Chrome Wheels. Fits 1/16 Ford Fiesta.

TRAXXAS

Traxxas 1/16 Slash Push Rods (aluminum red-anodized), 7018X

These are the optional Red-Anodized Aluminum Pushrods for use on the Traxxas 1/16 scale Slash Vehicles.

TRAXXAS

Traxxas 112mm Toe Links Black-Anodized Maxx, 5141A

These are the optional lightweight 112mm Toe Links with Rod Ends for the Traxxas Maxx Models. They are made from black-anodized, 7075-T6 aluminum, which is stronger than titanium. Includes two 112mm...

TRAXXAS

Traxxas 124mm Toe Links Black-Anodized Maxx, 5143A

These are the optional lightweight 124mm Toe Links with Rod Ends for the Traxxas Maxx Models. They are made from black-anodized, 7075-T6 aluminum, which is stronger than titanium. Includes two 112mm...

TRAXXAS

Traxxas 124mm Toe Links Red-Anodized Maxx, 5143R

These are the optional lightweight 124mm Toe Links with Rod Ends for the Traxxas Maxx Models. They are made from Red-anodized, 7075-T6 aluminum, which is stronger than titanium. Includes two 112mm...

TRAXXAS

Traxxas 12x21x5mm Ball Bearings for E-Revo Brushless, 5101

These are the Blue Rubber Sealed 12x21x5mm Ball Bearings for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas 16-Tooth Clutch Bell with Washers and E-Clip, 5216

Traxxas 16-Tooth Clutch Bell with Washers and E-Clip for the Revo 3.3 and Slayer. Includes 5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch).

TRAXXAS

Traxxas 17-Tooth Clutch Bell with Washers and E-Clip, 5217

Traxxas 17-Tooth Clutch Bell with Washers and E-Clip for the Revo 3.3 and Slayer. Includes 5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch).

TRAXXAS

Traxxas 2.4GHz Micro 4-Channel Receiver, 2217

This is the 4-channel micro receiver for the new Traxxas TQ 2.4GHz 4-Channel Spread Spectrum Radio. Requires Installation into Vehicle Length: 38mm (1.5") ...

TRAXXAS

Traxxas 2.5mm Nylon Locking Nuts, 5158

These are the 2.5mm Nylon Locking Nuts for several Traxxas R/C vehicles.

TRAXXAS

Traxxas 2.5x16mm Cap-Head Machine Screws (hex) for TRX-4, 2618

These are the 2.5x16mm Cap-Head Machine Screws (hex drive) for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit. Includes 6 screws.

TRAXXAS

Traxxas 2.5x8mm Button-Head Machine Screws (hex) for TRX-4, 2617

These are the 2.5x8mm Button-Head Machine Screws (hex drive) for the Traxxas TRX-4 Scale and Trail Crawler and Tactical Unit. Includes 6 screws.

TRAXXAS

Traxxas 2.8" Black Chrome All-Star Wheels (electric rear), 3772A

Traxxas 2.8" Black Chrome All-Star Wheels for Electric Rustler & Stampede. This is a set of 2 and is for the rear only.

TRAXXAS

Traxxas 2.8" Chrome All-Star Wheels (electric rear), 3772

Traxxas 2.8" Chrome All-Star Wheels for Electric Rustler & Stampede. This is a set of 2 and is for the rear only.