TRAXXAS

Traxxas White Wing w/decals 1/16 E-Revo, 7123

This is the White Wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

TRAXXAS

Traxxas Wide Face Steel Spur Gear 50-tooth 1.0 pitch - Maxx 4S/X-Maxx, 6448R

This is the Traxxas Wide Face Steel Spur Gear (50-tooth, 1.0 metric pitch) for the 1/8 X-Maxx Monster Truck. Steel delivers the ultimate in durability and heat resistance for your Maxx 4S and X-Maxx...

TRAXXAS

Traxxas Wing and Mounts - XO-1, 6414

This is the Traxxas Wing and Mounts for the new Traxxas XO-1 4WD Supercar.

TRAXXAS

Traxxas Wing and Washer for Sledge 1/8 Monster Truck - Blue, 9517X

This is the Blue Wing and Wing Washer for the 1/8 Traxxas Sledge Monster Truck. Includes 4x12mm FCS (2).

TRAXXAS

Traxxas Wing Mount & Hardware 1/16 E-Revo, 7121

This is the Wing Mount for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

TRAXXAS

Traxxas Wing Mount for Sledge 1/8 Monster Truck, 9518

This is the Wing Mount for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Wing w/decals 1/16 E-Revo, 7122

This is the black Wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

TRAXXAS

Traxxas Wire Gasket Villain EX, 1578

This is the Wire Gasket for the EVX Marine ESC and Silicone Grease used in the Traxxas Villain EX.

TRAXXAS

Traxxas Wiring Harness Connector for EZ-Start and EZ-Start 2, 4579X

This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into.FEATURES: Extra long 12" wires; Pre-installed...

TRAXXAS

Traxxas X-long Shocks (hard-coated T6 alum w/o springs, rear), 4761

Traxxas Hard-Coat shocks greatly reduce piston/housing friction, and this helps to prevent the heat build-up that can cause inconsistent performance. The coating actually permeates the T-6 aluminum,...

TRAXXAS

Traxxas Yoke Brake w/Pins Revo, 5457

This is the Brake Yoke w/Pins for the Traxxas Revo. It is use on the Center/Front Driveshaft Assembly.

TRAXXAS

Traxxas Yokes Differential and Transmission, 5458X

These are the Differential and Transmission Drive Yokes for the T-Maxx 3.3 and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Yokes Stub Axle w/Pins, 5453

This is a pair of replacement Drive Yokes for the Revo and other specified Traxxas vehicles. These yokes attach to the half shaft assemblies.

TRAXXAS

Traxxas 30-Tooth Steel Idler Gear and Shaft for Drag Slash, 9492

This is the Traxxas 30-Tooth Steel Idler Gear and Shaft for the 1/10 Traxxas Drag Slash and other specified Traxxas models. The hardened-steel 30-tooth idler gear provides maximum durability and...

TRAXXAS

Traxxas 4x18mm Countersunk Machine Hex Screws, 2547

These are the Traxxas Countersunk 4 x 18mm Screws.

TRAXXAS

Traxxas Aluminum Chassis Brace (T-Bar) for Sledge 1/8 Monster Truck - Black, 9523

This is the Black Anodized 6061-T6 Aluminum Chassis Brace (T-Bar) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 SS (2).

TRAXXAS

Traxxas Aluminum Chassis Brace (T-Bar) for Sledge 1/8 Monster Truck - Blue, 9523X

This is the Blue Anodized 6061-T6 Aluminum Chassis Brace (T-Bar) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 SS (2).

TRAXXAS

Traxxas Aluminum Chassis Brace (T-Bar) for Sledge 1/8 Monster Truck - Gray, 9523A

This is the Gray Anodized 6061-T6 Aluminum Chassis Brace (T-Bar) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 SS (2).

TRAXXAS

Traxxas Aluminum Chassis Brace (T-Bar) for Sledge 1/8 Monster Truck - Green, 9523G

This is the Green Anodized 6061-T6 Aluminum Chassis Brace (T-Bar) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 SS (2).

TRAXXAS

Traxxas Aluminum Chassis Brace (T-Bar) for Sledge 1/8 Monster Truck - Orange, 9523T

This is the Orange Anodized 6061-T6 Aluminum Chassis Brace (T-Bar) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 SS (2).

TRAXXAS

Traxxas Aluminum Rear Shock Tower for Sledge 1/8 Monster Truck - Blue, 9538

This is the 6061-T6 Blue Aluminum Rear Shock Tower for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Aluminum Rear Shock Tower for Sledge 1/8 Monster Truck - Gray, 9538A

This is the 6061-T6 Gray Aluminum Rear Shock Tower for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Black Wheelie Bar Wheels for Drag Slash, 9461

These are the Black Wheelie Bar Wheels for the 1/10 Traxxas Drag Slash. Includes 26mm (2) and 18mm (2).

TRAXXAS

Traxxas Chassis Side Guards for Sledge 1/8 Monster Truck, 9524

These are the Chassis Side Guards (left and right) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x8 CCS (10).

TRAXXAS

Traxxas Chevrolet C10 Wing for Drag Slash, 9414

These are the Chevrolet C10 Wing for the 1/10 Traxxas Drag Slash. Includes support/ side plates (left & right)/ 3x10 BCS (4).

TRAXXAS

Traxxas Differential Output Gears for Drag Slash, 9483

These are the Differential Output Gears for the 1/10 Traxxas Drag Slash. Includes 2 gears.

TRAXXAS

Traxxas Fixed (A) Gear Adapter and Motor Mount Spacer for Sledge 1/8 Monster Truck, 9590

This is the Fixed (A) Gear Adapter and Motor Mount Spacer for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Front Center Driveshaft for Sledge 1/8 Monster Truck, 9555

This is the Front Center Driveshaft for the 1/8 Traxxas Sledge Monster Truck. Includes (1) shaft, 4mm x 88mm.

TRAXXAS

Traxxas Front Chassis Brace for Sledge 1/8 Monster Truck, 9520

This is the Front Chassis Brace for the 1/8 Traxxas Sledge Monster Truck. Includes 4x15 CCS (2).

TRAXXAS

Traxxas Front Suspension Arm Covers for Sledge 1/8 Monster Truck - Orange, 9633T

These are the Orange Front Suspension Arm Covers for the 1/8 Traxxas Sledge Monster Truck. Includes left and right covers/ 2.5x8 CCS (12).

TRAXXAS

Traxxas GT-Maxx 80mm Shock Shaft for Sledge 1/8 Monster Truck, 9662

This is the GT-Maxx 80mm Shock Shaft for the 1/8 Traxxas Sledge Monster Truck. Steel with chrome finish. Comes assembled with rod ends and steel hollow balls.

TRAXXAS

Traxxas Rear 144mm Camber Links for Sledge 1/8 Monster Truck, 9548

These are the Rear 144mm Camber Links for the 1/8 Traxxas Sledge Monster Truck. Includes 2 links assembled with hollow balls.

TRAXXAS

Traxxas Rear 74mm GTR Shock Shaft for the Unlimited Desert Racer, 8463

This is the Rear 74mm GTR Shock Shaft for the Traxxas Unlimited Desert Racer.

TRAXXAS

Traxxas Rear Chassis Braces and Towers for Sledge 1/8 Monster Truck, 9521

These are the Rear Chassis Braces and Towers for the 1/8 Traxxas Sledge Monster Truck. Includes rear chassis brace (1), rear tower (2), and 4x15 CCS (2).

TRAXXAS

Traxxas Rear Suspension Arm Covers for Sledge 1/8 Monster Truck - Black, 9634

These are the Black Rear Suspension Arm Covers for the 1/8 Traxxas Sledge Monster Truck. Includes left and right covers/ 2.5x8 CCS (12).

TRAXXAS

Traxxas Rear Suspension Arm Covers for Sledge 1/8 Monster Truck - Orange, 9634T

These are the Orange Rear Suspension Arm Covers for the 1/8 Traxxas Sledge Monster Truck. Includes left and right covers/ 2.5x8 CCS (12).

TRAXXAS

Traxxas Roof Skid Pads for XRT, 7816

These are the Roof Skid Pads for the Traxxas XRT Monster Race Truck. Includes 3x12 mm screws (8). Fits 7812 body.

TRAXXAS

Traxxas Screws 3x15mm Washerhead Machine, 3187

These are the Traxxas 3x15mm Washerhead Machine Screws for the Monster Jam 1/10 and other specified Traxxas vehicles.

TRAXXAS

Traxxas Screws, 4x6mm Button-Head Machine (hex) (6), 3939

This is a 6 pack of Traxxas 4X6mm Button Head Screws.FEATURES: Steel construction; Black in color; Button-head designINCLUDES: (6) 4X6mm button head screwsSPECS:Overall Length: 1/4" (6mm)Diameter:...

TRAXXAS

Traxxas Servo Case for 2275 Servo, 2276

This is the Traxxas Servo Case for the 2275 Servo used on the 1/8 Traxxas Sledge Monster Truck and other specified Traxxas vehicles. Made of plastic. Includes top, middle, and bottom/ gaskets/...

TRAXXAS

Traxxas Slipper Tension Spring Set, 1994

This is the replacement slipper tension spring set for several specified Traxxas R/C nitro vehicles.

TRAXXAS

Traxxas Standard Front White GTR Shock Spring 1.1 Rate Green, 5430

This is the White GTR Shock Spring Standard Front (1.1 rate Green) for the Traxxas Nitro Jato 3.3 Stadium Truck.

TRAXXAS

Traxxas Suspension Arms for Adjustable Wheelbase (right/upper & lower arm) - Revo/Summit, 5327

This is the Upper and Lower Right Suspension Arm Set used in the Revo Adjustable Suspension Arm Set (TRA5341).FEATURES: Black nylon constructionINCLUDES: One upper rear and one lower right rear...

TRAXXAS

Traxxas Sway Bar Mounts and Collars for Sledge 1/8 Monster Truck, 9597

These are the Sway Bar Mounts for the 1/8 Traxxas Sledge Monster Truck. Includes front and rear mounts.

TRAXXAS

Traxxas 12T Pinion Gear (32p) Brass, 1887

This is the 12T Pinion Gear (32p) Brass used in the Traxxas Villain EX race boat.

TRAXXAS

Traxxas 3x12mm Roundhead Machine Screws, 2561

This is a set of 6 Traxxas 3x12mm Roundhead Machine Screws.

TRAXXAS

Traxxas 3x16mm Shoulder Screws for Sledge 1/8 Monster Truck, 9588

These are the 3x16mm Shoulder Screws for the 1/8 Traxxas Sledge Monster Truck. Includes 2 screws.

TRAXXAS

Traxxas Battery Hold Down for Sledge 1/8 Monster Truck, 9627

This is the Battery Hold Down for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Battery Hold Down Retainer for Sledge 1/8 Monster Truck, 9628

This is the Battery Hold Down Retainer (front and rear, 1-each) for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Battery Tray for Sledge 1/8 Monster Truck, 9626

This is the Battery Tray for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Cap-Head Machine Screws (3x32mm hex) (6), 3964

This is a 6 pack of Traxxas 3X32mm Cap Head Screws.

TRAXXAS

Traxxas Center Body Support for Sledge 1/8 Monster Truck, 9513

This is the Center Body Support for the 1/8 Traxxas Sledge Monster Truck. Includes 3x16 CS (8).

TRAXXAS

Traxxas Differential Carrier for Sledge 1/8 Monster Truck, 9581

This is the Differential Carrier for the 1/8 Traxxas Sledge Monster Truck. Includes differential bushing (metal)/ o-rings (2)/ ring gear gasket.

TRAXXAS

Traxxas Front Body Mount for Sledge 1/8 Monster Truck, 9514

This is the Front Body Mount for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Front Body Mounts for XRT, 7825

These are the Front Body Mounts for the Traxxas XRT Monster Race Truck.

TRAXXAS

Traxxas Main Frame Lower White with Screws for the LaTrax Alias Quad-Copter, 6624A

This is the Traxxas Main Frame Lower White with Screws for the LaTrax Alias Quad-Copter. Includes 1.6x5mm BCS selftapping screws (4).

TRAXXAS

Traxxas Rear Body Mount Latch for Clipless Mount for XRT, 7824

This is the Rear Body Mount Latch for Clipless Body Mounting on the Traxxas XRT Monster Race Truck. Includes 3x12mm CS screws (4). Fits 7812 body.

TRAXXAS

Traxxas Rear Body Mounts for XRT, 7826

These are the Rear Body Mounts for the Traxxas XRT Monster Race Truck.

TRAXXAS

Traxxas Rear Mud Guards for Sledge 1/8 Monster Truck - Black, 9519

These are the Black Rear Mud Guards (left and right) for the 1/8 Traxxas Sledge Monster Truck. Includes 3x15 CCS (2)/ 3x25 CCS (2).

TRAXXAS

Traxxas Servo Saver Assembled for Sledge 1/8 Monster Truck, 9545

This is the Servo Saver Assembled for the 1/8 Traxxas Sledge Monster Truck.