The RPM Low Center of Gravity Blue Front Bulkhead for the Traxxas Slash 4x4 and 1/10th Rally is built to solve several key issues reported by Traxxas customers. To begin with, RPM has split the design into two pieces to make maintenance a much simpler task. With this new RPM design, the front end of your Traxxas vehicle can be removed without having to remove the bellcranks. All you have to do is remove two tie rod screws at the spindle block and then the steering system stays connected to the chassis.
RPM has also included several modifications to keep the steering system cleaner. The first comes from a pair of side dirt shields that blend in with the chassis to help protect the steering servo and bellcrank area from debris kicked up by the front wheels. Even better, they've also sealed the bottom of the bulkhead to keep debris from entering from below.
As always with RPM, each LCG bulkhead is made from their bulletproof blend of engineering grade nylons and is supported by a limited lifetime breakage warranty.
Tech Notes: These new RPM bulkheads for the LCG Slash 4x4 & 1/10th scale Rally replace Traxxas stock part #7430. Please note that these bulkheads will not work on the standard height chassis version of either the Slash 4x4 or Stampede 4x4.