CEN M-Sport Ford Puma Rally 1/8 4WD RTR, 8999

The CEN M-Sport Ford Puma Rally 1/8 4WD Brushless RTR boasts a robust 1/8 scale chassis that seamlessly combines durability and agility. The 4WD system ensures exceptional traction on various surfaces, from gravel to dirt. The precisely tuned suspension system, featuring adjustable shocks and optimized geometry, delivers a balance between high-speed stability and responsive handling, allowing enthusiasts to conquer jumps, bumps, and tight corners with confidence.

• Massive 22mm Diameter Aluminum Shocks
• DVP - Dual Vertical Plate Chassis for a Strong, Lightweight, Backbone
• Sensorless 1450KV Motor
• Hobbywing 150A ESC w/ XT90 Output
• High Torque Steering Servo
• Three Fluid-Filled, Bevel Gear Differentials (F/C/R) to Harness the Massive Power.

FEATURES:

ESC:

• 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HobbyWing).
• 2-3S Li-po (Lithium-polymer) or 6-9 Cell NiMh Batteries.
• Water-Proof and Dust-Proof for All Weather.
• Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
• Built-In Capacitor Module.
• Automatic Throttle Range Calibration.
• Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
• Over-Heat Protection and Throttle Signal Loss Protection.
• 5 Levels of acceleration/punch.
• 9 Levels of maximum brake force.

MOTOR:

• CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

SERVO:

• 12Kg Metal Gear Servo (By Savox).
• 4.8V - 0.26 sec/60° 10.0 kg-cm.
• 6.0V - 0.23 sec/60° 12.0 kg-cm.
• With 25T Horn Gear Spline.

RADIO SYSTEM:

• AMP-30 TX 3-Channel Transmitter.
• Frequencies: 2.4GHz.
• Digital Trimming.
• Steering Dual-Rate (ST D/R) Adjustment.
• End Point Adjustment (EPA).
• Build in Failsafe.
• Power Supply: 4 - AA Alkaline (Not Included).
• AMP30 RX 3-Channel Receiver.
• Frequency: 2.4GHz.
• Power Supply: DC 4.8 ~ 6.0V.
• Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

BODY:

• Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition
• Fully Detailed Injection-Molded Body Accessories Body Details
• Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

CHASSIS:

• 3mm Aluminum Chassis
• Front and Rear 3mm Aluminum Shock Towers
• Aluminum Arm Brace
• Full Precision Ball Bearing Support
• Wider Body Mount Positions for Better Support
• Front Skid plate with Durable Foam Bumper
• Injection-Molded Rear Diffuser
• Easy Access Battery Tray
• Battery Tray Size 142mm x 48mm

SUSPENSION:

• Aerodynamic Lower Arm Suspension Design
• Big Bore Oil Filled Adjustable Coil Over Shocks
• 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
• Racing Spring
• Adjustable Turnbuckles
• Adjustable Wheelbase +/- 6mm

GEAR RATIO:

• Spur / Pinion 46/14T 3.29:1
• Ring & Pinion 40/17T 2.35:1

DRIVETRAIN:

• Full Time 4-Wheels Drive
• Center Shaft Drivetrain for more power transferred to the wheels
• Metal Transmission Gears
• Aluminum Adjustable Motor Mount
• Oil Filled Two Differential Drive System
• Center Direct Drive
• Highly Efficient Transmission System
• 6 Gear Bevel Gear Type Differential
• Front / Rear Harden Steel Dog Bone and outdrives

WHEEL: High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

TIRES: High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm.

REQUIRES:

• 2S-3S LiPo battery pack with T-Plug (Deans)
• Or, 6-9 cell NiMh battery with T-Plug (Deans)
• Appropriate charger for LiPo battery
• 4 "AA" alkaline batteries for radio system

TECHNICAL SPECS:

• Length: 20.08 inches (510mm) 
• Width: 9.45 inches (240mm)
• Chassis Length: 18.11 inches (460mm)
• Chassis Width: 9.06 inches (230mm)
• Wheelbase: 11.80 inches (300mm)
• Weight: 5.51lbs. (2.5kg)
• Ground Clearance: 0.98 inches (25mm)