Traxxas Slayer Transmission & Gearing

TRAXXAS

Traxxas Heavy Duty Slipper Clutch Rebuild Kit, 5352R

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas. Fits Revo, Maxx and Slayer Pro 4x4 trucks. Includes steel disc/ aluminum friction pads (3)/ spring, Revo (1)/ spring, Maxx (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1).

TRAXXAS

Traxxas Spur gear (36-tooth; 1.0 metric pitch), 3953

This is a 36-tooth, 1.0 metric pitch spur gear for several Traxxas vehicles.

TRAXXAS

Traxxas Roll Hoop/Transmission Skid Guard Revo-Slayer, 5316

Traxxas Plastic Roll Hoop and Transmission Skid Guard for the Revo 3.3 and Slayer.

TRAXXAS

Traxxas U-Joints Driveshaft, 5452

These are the Drive Shaft Joints for the Revo and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Spur gear (40-tooth; 1.0 metric pitch), 3955

This is a 40-tooth, 1.0 metric pitch spur gear for several Traxxas vehicles.

TRAXXAS

Traxxas Yokes Differential and Transmission, 5458X

These are the Differential and Transmission Drive Yokes for the T-Maxx 3.3 and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Flywheel, 4142

This is the aluminum 2-pin flywheel used on several Traxxas R/C trucks.

TRAXXAS

Traxxas Spur gear (38-tooth; 1.0 metric pitch), 3954

This is a 38-tooth, 1.0 metric pitch spur gear for several Traxxas vehicles.

TRAXXAS

Traxxas Gear Set 2-Speed Wide Ratio, 5384

This is a Two-Speed Wide Ratio Gear Set for the Traxxas Revo transmission. Includes 2nd speed gear 38T, 13T-18T input gears, hardware.

TRAXXAS

Traxxas Slipper Pressure Plate/Hub (alloy), 5351

This is a Replacement Slipper Pressure Plate and Slipper Hub for several Traxxas vehicles, including the Revo series, Maxx series, Summit & Slayer. These are part of the slipper assembly.FEATURES: Aluminum constructionINCLUDES: One slipper pressure...

TRAXXAS

Traxxas Cap-Head Machine Screws 2.5x12mm (6), 3236

This is a set of 6 Cap-Head Machine Screws (2.5x12mm) for use on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Transmission Input Shaft, 5366

This is the Transmission Input Shaft for the Traxxas Revo and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Gearbox Halves Slayer, 5391R

These are the Gear Box Halves for the Traxxas Slayer Pro 4WD Short Course Nitro RTR.

TRAXXAS

Traxxas Gear 1st Speed 43T Revo, 5386

This is the 1st Speed Gear for the Traxxas Revo.

TRAXXAS

Traxxas Differential Carrier w/gaskets, 5381

This is the Diff Carrier/Gasket Set for the Traxxas Revo and Slayer.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5352X

This is the Traxxas Slipper Clutch Rebuild Kit for Revo, Summit and Maxx trucks. Includes steel disc, (3) friction pads, (2) springs, 2x9.8mm pin, 5x8mm MW, 5mm NL, 4mm NL.

TRAXXAS

Traxxas Center Differential Gear for Slayer Pro 4X4, 5914X

This is the Traxxas Center Differential Gear for the Slayer Pro 4X4. Includes Cover (1) / X-ring seals (2)/ gasket (1)/ 6x10x0.5 TW (2) (Replacement gear for 5914).

TRAXXAS

Traxxas Gear Set 2-Speed Close Ratio, 5383

This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. Includes 2nd speed gear 40T, 13T-16T input gears, hardware.

TRAXXAS

Traxxas Gear Set 2-Speed Standard Ratio, 5385

This is a Two-Speed Standard Ratio Gear Set for the Traxxas Revo transmission. Includes 2nd speed gear 39T, 13T-17T input gears, hardware.

TRAXXAS

Traxxas Front and Rear Differential Housings, 5380

These are the Front and Rear Differential Housings for the Traxxas Revo and Slayer.

TRAXXAS

Traxxas Flywheel, 40mm Silver Anodized, 4142X

This is an optional Large Knurled Flywheel (40mm) for use with Starter Boxes.FEATURES: Large knurles to be gripped by rubber starter wheels; Two pin aluminum construction; Vent holes drilled to keep clutch shoes cooler.

TRAXXAS

Traxxas Clutch Shoes & Spring (T-Maxx/Revo/Jato/Nitro 4-Tec), 4146X

These are Replacement Clutch Shoes for the T-Maxx and other specified Traxxas nitro R/C vehicles. These mount to the flywheel and engage the clutch.

TRAXXAS

Traxxas Primary Gears, Forward and Reverse, 5396X

These are the Primary Forward and Reverse Gears for the Traxxas T-Maxx 3.3.

TRAXXAS

Traxxas Primary Gear Set for Slayer Pro 4X4, 5996

This is the Traxxas Primary Gear Set (23T and 33T) for the Slayer Pro 4X4. Includes 2x11.8mm pin, pin retainer, and disc spring.