Traxxas Nitro Stampede Engine & Electronics

TRAXXAS

Traxxas Digital High-Torque Servo (ball bearing), 2070

This is the Digital High Torque Traxxas Servo. FEATURES: Ball bearings; Black plastic construction.

TRAXXAS

Traxxas EZ-Start Starting System, 4570

This is the original Easy Start Starting System for Traxxas Nitro Vehicles using the Traxxas TRX and TRX PRO Engines.

TRAXXAS

Traxxas Waterproof Digital High-Torque Digital Metal Gear Servo, 2270

This is the New Traxxas Waterproof Digital High-Torque Digital Metal Gear Servo. The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 236 oz-in of torque on tap and full metal gears, the 2270 servo provides a...

TRAXXAS

Traxxas EZ-Start Gearbox, 4575

This is the stock replacement EZ start gearbox for Traxxas vehicles.

TRAXXAS

Traxxas Wiring Harness for Receiver Power Pack, 3034

This is an optional Receiver Switch Harness with Charge Jack for most Traxxas Nitro Vehicles except for the Traxxas Revo. Includes on/off switch and charge jack.

TRAXXAS

Traxxas Servo Saver, 1844

This is a large servo saver that can be used in Traxxas vehicles or any vehicle that requires a large style servo saver.

TRAXXAS

Traxxas One-Way Starter Bearing, 4011

This is the stock replacement One-Way Bearing for the Traxxas engines. This bearing is located on the starter shaft.SPECS: Inner bearing diameter: 6mm (0.24")NOTES: This bearing is unique to this engine, and cannot be substituted byanother bearing.

TRAXXAS

Traxxas Clutch Shoes & Spring (N. Rustler/N.Sport/N.Stampede), 4146

This is the Stock Replacement Clutch Shoes and Spring set for the Nitro Stampede, Nitro Rustler & Nitro Sport. These shoes are located underneath the clutch bell.

TRAXXAS

Traxxas Clutch Bell (18-tooth), 4118

This is the Traxxas 18 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Air Filter Foam Insert, 4061

This is the Pre-Oiled Air Filter Foam Insert for the Nitro Stampde & other Traxxas Nitro Powered Vehicles.

TRAXXAS

Traxxas EZ-Start Control Box, 4580

This is the Replacement EZ Start Control Box for the Traxxas EZ Start.

TRAXXAS

Traxxas Metal Gear Set (for 2070, 2075 servos), 2072X

This is the replacement Metal Gear Set for the 2070 & 2075 Servo.

TRAXXAS

Traxxas Flywheel Large for Starter Boxes, 6542X

This is the Traxxas Large Flywheel. It is knurled for use with starter boxes.

TRAXXAS

Traxxas Header Screws 3x23mm Cap Hex, 2556

These are 3x23mm Header Screws from Traxxas.

TRAXXAS

Traxxas Flywheel, 4142

This is the aluminum 2-pin flywheel used on several Traxxas R/C trucks.

TRAXXAS

Traxxas Exhaust Pipe & Baffle Cones, 3552

This is the Exhaust Pipe Kit for the Traxxas Nitro Stampede.

TRAXXAS

Traxxas EZ Start Motor, 4578

This product is the replacement motor for the Traxxas EZ Start System.

TRAXXAS

Traxxas Exhaust Header and Pressure Fitting Gaskets, 3156

This is the replacement gasket set for the Traxxas Nitro Sport and Stampede exhaust header. Includes exhaust header gasket (1)/ gaskets, pressure fitting (2). For side exhaust engines only.

TRAXXAS

Traxxas Heat Shield Tubing Fiberglass, 3149A

This is the Traxxas Heat Shield Tubing.

TRAXXAS

Traxxas Servo High-Torque Waterproof (blue case), 2056

This is the replacement High Torque Waterproof Servo for several Traxxas R/C vehicles. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these. INCLUDES: One High Torque Servo with J style...

TRAXXAS

Traxxas Lead Wire Glow Plug Blue for EZ-Start and EZ-Start 2, 4581X

Traxxas glow plug lead wire for the EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Blue silicone insulated wire with pre-installed connectors.

TRAXXAS

Traxxas Gears Set (for 2070, 2075 servos), 2072A

This is the replacement Gear Set for the 2070 & 2075 Servo. Replaces original Traxxas part #2072.

TRAXXAS

Traxxas Lead Blue Glow Plug Wire for EZ-Start and EZ-Start 2, 4581

This is the Lead Blue Glow Plug Wire for the Traxxas EZ-Start and EZ-Start 2.

TRAXXAS

Traxxas 4-cell Battery Holder with On-Off Switch, 3170X

This is the replacement 4-cell battery holder for several Traxxas Ready-to-Run nitro kits. This receiver battery box holds four "AA" batteries and powers the receiver.

TRAXXAS

Traxxas Air Filter (w/rubber base & foam insert), 4060

This is the Air Filter for Traxxas Nitro Powered Vehicles. This Filter fits over the carburetor and prolongs engine life by preventing dirt from entering engine.FEATURES: Constructed of black rubber with oiled foam insert.INCLUDES: One Air Filter for...

TRAXXAS

Traxxas Wiring Harness Connector for EZ-Start and EZ-Start 2, 4579

This is the Original Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into.

TRAXXAS

Traxxas Silicone Exhaust Tube, 3551

This is the Silicone Exhaust Muffler Tube for the Traxxas Nitro Stampede. This slides onto the muffler exhaust outlet and is used to direct the exhaust away from the vehicle.

TRAXXAS

Traxxas Clutch Bell (20-tooth), 4120

This is the Traxxas 20 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Clutch Bell (22-tooth), 4122

This is the Traxxas 22 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Metal Exhaust Hanger (Nitro Stampede), 4153

This is the Exhaust Hangar for Traxxas Nitro Stampede. This part is mounted to the rear of the vehicle. FEATURES: Steel construction, Zinc finish

TRAXXAS

Traxxas Recoil Pull Starter (.12 & .15), 4070

This is the Replacement Recoil Starter Assembly for the Traxxas TRX-12, TRX-15 and Pro-15 Engine.INCLUDES: One Recoil Starter Unit w/String and Handle InstalledCOMMENTS: This doesn't have the backplate or any of the attachment hardware. For the One-Way...

TRAXXAS

Traxxas Servo High-Torque for T-Maxx and E-Maxx, 2055

This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx or any other vehicle that you would like to mount this in. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these...

TRAXXAS

Traxxas Exhaust Tip (rubber, Nitro Stampede), 4154

This is the Exhaust Tip for the Traxxas Nitro Stampede Monster Truck.These Tips are installed on either end of the muffler to direct the exhaust to the rear of the vehicle.

TRAXXAS

Traxxas Exhaust Header (Nitro Stampede), 4150

This is an exhaust header used on the TRAXXAS STAMPEDE truck w/.12 engine.INCLUDES: (1) Header; (1) Pressure fitting; (1) Gasket for pressure fittingSPECS: Distance between mounting holes - 27.5mm center to center; Width of exhaust flange - 20mm; Height...

TRAXXAS

Traxxas PowerTune Cooling Head TRX 2.5/2.5R, 5237

This is the Power Tune Cooling Head for the Traxxas TRX 2.5 and 2.5R with plastic head protector.

TRAXXAS

Traxxas Silicone Exhaust Tube Nitro Stampede, 3551A

This is the Blue Silicone Exhaust Tube for the Traxxas Nitro Stampede.

TRAXXAS

Traxxas Universal Hanger Wire 6", 4085

This is a Universal Support (hanger wire), to mount a Tuned Pipe to the chassis, from Traxxas.FEATURES: Features solid steel construction with a small loop on the end. Chrome color finish.REQUIRES: Bending and cutting to desired length.

TRAXXAS

Traxxas Rear Bumper/Battery Box/Body Clips, 4132

This is the Rear Bumper (Battery Box) for the Nitro Stampede and other Traxxas nitro vechicles.FEATURES: Durable black plastic construction.INCLUDES: One rear bumper; Two Body Clips (holds the battery cover on); One battery box; And One Easy Start...

TRAXXAS

Traxxas Clutch Bell (16-tooth), 4116

This is the Traxxas 16 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Clutch Adapter Nut, 4144

This is a replacement clutch adapter nut for the Stampede and other specified Traxxas nitro trucks. This screws onto the crankshaft of the engine (not for use with IPS crankshafts).

TRAXXAS

Traxxas Servo Case (for 2070 servo), 2071

This is the Servo Case Set for the Traxxas #2070 Servo.

TRAXXAS

Traxxas 5-cell 1100mAh NiMh Receiver Battery, 3037

This is the 5 Cell 6 Volt 1100 mAh NiMH Receiver Battery for Traxxas Nitro Vehicles.

TRAXXAS

Traxxas Aluminum Exhaust Baffle Cone, 3153

This is the replacement Exhaust Baffle Cone for the Traxxas Nitro Stampede.

TRAXXAS

Traxxas Engine Mount (2-piece, aluminum), 4160

This is the Engine Mount w/Adjustable plates for the Traxxas Nitro Stampede.

TRAXXAS

Traxxas EZ-Start Gear Set/Shafts, 4576

These are Replacement Gears and Shafts for the Traxxas EZ-Start System.