Traxxas Nitro 4-TEC 3.3 Driveline & Steering

TRAXXAS

Traxxas Servo Gears for 2055 and 2056 servos, 2053

This is a replacement Gear set for the Traxxas 2055 and 2056 servos.

TRAXXAS

Traxxas Rod Ends (short w/hollow balls, 6), 2742X

This is the 6-piece Short Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas Differential Output Yokes (white, w/screws & pins), 4628

This is the Replacement Differential Output Yokes Set for several Traxxas R/C vehicles. FEATURES: White nylon differential output yokes. INCLUDES: 2 White nylon yokes; 4 3x3mm set screws (.5 pitch); 2 3x5mm countersunk screws (.5 pitch); 2 3x12mm yoke...

TRAXXAS

Traxxas Wheel Hubs (hex w/pins, 2), 1654

These are the replacement rear wheel adapters for several Traxxas R/C vehicles.

TRAXXAS

Traxxas 20-Groove Middle Pulleys for Nitro 4-TEC, 4895

These are the replacement 20-Groove Middle Pulleys for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas Servo Saver w/adapters, 3744

This is the replacement servo saver for several Traxxas vehicles. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos.

TRAXXAS

Traxxas Rod Ends Set (w/hollow balls & screws), 1942

This set of rod ends, balls, and screws is used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Stub Axle Pins (4), 2754

These are replacement stub axle pins for several Traxxas R/C vehicles. These pins slide through the axle and hold the wheel to the axle.

TRAXXAS

Traxxas Tie-Rods/Upper Camber Rods Rear 4-TEC, 4841

This is the replacement turnbuckle and draglink set for the Traxxas Electric and Nitro 4-TEC. Includes 24mm turnbuckles (4), draglink, 36mm (threaded rod).

TRAXXAS

Traxxas Stub Axles Nitro 4-TEC, 4853

These are the Replacement Stub Axles for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Steering Blocks Axle Housings 4-Tec, 4336

This is a pair of the Steering Blocks for the Traxxas Electric and Nitro 4-TEC. Includes axle housings left and right with metal inserts 3x4.5x5.5mm.

TRAXXAS

Traxxas Grey Front Bearing Block for Nitro 4-TEC, 4827A

This is the replacement Grey Front Bearing Block (4827A) for the Traxxas Nitro 4-TEC. Supports front shaft. Includes belt tension adjustment shims (front/ middle)/ screws.

TRAXXAS

Traxxas Front Bearing Block for Nitro 4-TEC, 4827

This is the replacement Front Bearing Block (4827) for the Traxxas Nitro 4-TEC. Supports front shaft. Includes belt tension adjustment shims (front/ middle)/ screws.

TRAXXAS

Traxxas Front Pulley Shaft for Nitro 4-Tec, 4894

This is the Front Pulley Shaft for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Rear Pulley Shaft for Nitro 4-Tec, 4893

This is the Rear Pulley Shaft for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Telescopic Drive-Shafts 4-TEC, 4851

These are Replacement Drive-Shafts for the Traxxas Nitro 4-Tec. Includes external-splined (2) & internal-splined (2) and metal U-joints (4).

TRAXXAS

Traxxas Front/Rear Pulleys 15-Groove for Nitro 4-Tec, 4896

These are the replacement 15-Groove Front and Rear Pulleys for the Traxxas Nitro 4-TEC. Includes flanges (2)/ axle pins (2).

TRAXXAS

Traxxas Servo Mounts 4-TEC, 2715

This is the standard servo mount for the Traxxas Nitro 4-TEC.