Traxxas X-Maxx Parts (6S & 8S)

TRAXXAS

Traxxas GTX Shock Springs Natural Finish 1.450 Rate - X-Maxx, 7857

These are the Traxxas GTX Shock Springs with 1.450 Rate and a natural finish for the X-Maxx 6S and 8S Monster Trucks. Includes 2 springs.

TRAXXAS

Traxxas Rear Differential Pinion Gear - X-Maxx, 7778

This is the Traxxas Rear Differential Pinion Gear for the X-Maxx Monster Truck (7778).

TRAXXAS

Traxxas Front Bumper - X-Maxx, 7735

This is the Traxxas Front Bumper for the X-Maxx Monster Truck (7735).

TRAXXAS

Traxxas 18T Steel Pinion Gear - X-Maxx, 6491X

This is the Traxxas 18-T Pinion Gear for the X-Maxx Monster Truck (6491X). Hardened steel for use with steel spur gears. Has 1.0 metric pitch and fits 5mm shaft. Includes set screw.

TRAXXAS

Traxxas 4x22mm Button-Head Machine Screws (hex) - X-Maxx, 2597

These are the Traxxas 4x22mm Button-Head Machine Screws (hex) for the X-Maxx Monster Truck (2597). Includes 6 screws.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit - X-Maxx, 7789

This is the Traxxas Slipper Clutch Rebuild Kit for the X-Maxx Monster Truck (7789). Includes steel disc, friction insert (1), spring (1), 2.5x12mm pin, 4.0mm NL(1).

TRAXXAS

Traxxas Tie Bar Mounts, Front and Rear - X-Maxx, 7716

These are the Traxxas Tie Bar Mounts, Front and Rear for the X-Maxx Monster Truck (7716).

TRAXXAS

Traxxas Ball Bearing Black Rubber Sealed (20x27x4mm) (2) - X-Maxx, 5182A

These are the Black Rubber Sealed Traxxas Ball Bearings (20x27x4mm) for the new X-Maxx Monster Truck (5182A). Includes 2 bearings.

TRAXXAS

Traxxas Countersunk Hex Screw 4x10mm Jato 3.3, 2535

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato 3.3 Stadium Truck.

TRAXXAS

Traxxas Center Skidplate - X-Maxx, 7745

This is the Traxxas Center Skidplate for the X-Maxx Monster Truck (7745).

TRAXXAS

Traxxas 14-T Steel Pinion Gear - X-Maxx, 6488X

This is the Traxxas 14-T Pinion Gear for the X-Maxx Monster Truck (6488X). Hardened steel for use with steel spur gears. Has 1.0 metric pitch and fits 5mm shaft. Includes set screw.

TRAXXAS

Traxxas GTX Shock Caps - X-Maxx, 7764

These are the Traxxas GTX Shock Caps for the X-Maxx Monster Truck (7764). Includes spring perch/ adjusters/ 2.5x14mm CS (2). For 2 shocks.

TRAXXAS

Traxxas Transmission Input Shaft - X-Maxx 8S, 7786X

This is the Traxxas Transmission Input Shaft (Cush Drive) for the X-Maxx 8S Monster Truck (7786X). Designed for slipper shaft.

TRAXXAS

Traxxas Hex Wheel Hubs (2) with Clips - X-Maxx, 7756

These are the Traxxas Hex Wheel Hubs (2) with Clips for the X-Maxx Monster Truck (7756).

TRAXXAS

Traxxas 24T Steel Pinion Gear - X-Maxx, 6496X

This is the Traxxas 24-T Pinion Gear for the X-Maxx Monster Truck (6496X). Hardened steel for use with steel spur gears. Has 1.0 metric pitch and fits 5mm shaft. Includes set screw.

TRAXXAS

Traxxas Front Differential Pinion Gear - X-Maxx, 7777

This is the Traxxas Front Differential Pinion Gear for the X-Maxx Monster Truck (7777).

TRAXXAS

Traxxas Button-Head Machine Screws, 3x6mm, 2575

This is a package of six 3x6mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Ball Bearings (5x11x4mm, blue rubber sealed), 5116

This is a 2-pack of Traxxas 5X11X4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Spur Gear 54-tooth 1.0 metric pitch - X-Maxx/XO-1, 6449

This is the Traxxas Spur Gear, 54-tooth, 1.0 metric pitch, for the X-Maxx and XO-1 4WD Supercar.

TRAXXAS

Traxxas 3x14mm Button-Head Machine Screws (hex) - X-Maxx, 2593

These are the Traxxas 3x14mm Button-Head Machine Screws (hex) for the X-Maxx Monster Truck (2593). Includes 6 screws.

TRAXXAS

Traxxas Steel Bulkhead Tie Bars - X-Maxx, 7726

These are the Traxxas Steel Bulkhead Tie Bars for the X-Maxx Monster Truck (7726). Includes 1 upper and 2 lower tie bars.

TRAXXAS

Traxxas Toe Links Black 173mm - X-Maxx, 7748

These are the Traxxas Toe Links Black 173mm for the X-Maxx Monster Truck (7748).

TRAXXAS

Traxxas 110mm GTX Shock Shafts - X-Maxx, 7763

These are the Traxxas 110mm GTX Shock Shafts for the X-Maxx Monster Truck (7763). Assembled with rod ends & hollow balls. Includes 2 shafts.

TRAXXAS

Traxxas Expander Box Seal Kit, 6552

This is the Expander Box Seal Kit for several specified Traxxas R/C vehicles. Includes o-ring, seals, and silicone grease.

TRAXXAS

Traxxas Ball Bearing Black Rubber Sealed (17x26x5mm) (2) - X-Maxx, 5107A

This is the Traxxas Ball Bearing Black Rubber Sealed (17x26x5mm) for the X-Maxx Monster Truck (5107A). Includes 2 bearings.

TRAXXAS

Traxxas Standard Servo Adapter - X-Maxx, 7749

This is the Traxxas Standard Servo Adapter for the X-Maxx Monster Truck (7749). Allows the installation of a standard-size servo in the X-Maxx chassis.

TRAXXAS

Traxxas Receiver Box - X-Maxx, 7724

This is the Traxxas Receiver Box for the X-Maxx Monster Truck (7724). Includes wire cover, foam pads, silicone grease, and 3x15 CS (4).

TRAXXAS

Traxxas Button-Head Machine Screws, 3x8mm, 2576

This is a package of six 3x8mm Traxxas Button Head Screws.

TRAXXAS

Traxxas 3mm Hardened Grub Screw Set (12), 2743

This is the 3mm Hardened Grub Screw Set (12-pc) from Traxxas.

TRAXXAS

Traxxas Black Wheelie Bar for X-Maxx Models, 7776

This is the Traxxas Assembled X-Maxx wheelie bar. Includes ball bearing wheels. Direct bolt-on to all X-Maxx models.

TRAXXAS

Traxxas Spur Gear 50-tooth 1.0 metric pitch - XO-1/X-Maxx, 6448

This is the Traxxas Spur Gear, 50-tooth, 1.0 metric pitch, for the X-Maxx and XO-1 4WD Supercar.

TRAXXAS

Traxxas Steering Bellcranks - X-Maxx, 7746

These are the Traxxas Steering Bellcranks for the X-Maxx Monster Truck (7746). Includes steering bellcranks, bellcrank support, servo saver, servo saver spring, draglink, and 3x20mm shoulder screws (2).

TRAXXAS

Traxxas Telemetry Temperature and Voltage Sensor (long), 6521

This is the Traxxas Telemetry Temperature and Voltage Sensor (long). The Temperature Sensor installs on the motor or engine to measure its temperature.

TRAXXAS

Traxxas Flathead Hex Engine Mount Screws 3x10, 4859

These are Flat Head Engine Mount Screws from Traxxas.

TRAXXAS

Traxxas Differential Ring Gear - X-Maxx, 7779

This is the Traxxas Differential Ring Gear for the X-Maxx Monster Truck (7779).

TRAXXAS

Traxxas Telemetry Expander for TQi Radio System, 6550

This is the Traxxas Telemetry Expander for the TQi Radio System. Installs quickly and easily Supports six plug and play sensors (sold separately) Ready to accept plug-in GPS Speed Module (sold separately) Waterproof Requires telemetry expander mounting...

TRAXXAS

Traxxas Aluminum Wheelie Bar Wheels for XRT - Blue, 7775X

These are Upgrade 6061-T6 Blue Aluminum Wheelie Bar Wheels for the Traxxas XRT Monster Race Truck and other specified vehicles. Includes wheels (2)/ wheelie bar axle 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4).   Machined from tough 6061-T6...

TRAXXAS

Traxxas Aluminum Wheelie Bar Wheels for XRT - Red, 7775R

These are Upgrade 6061-T6 Red Aluminum Wheelie Bar Wheels for the Traxxas XRT Monster Race Truck and other specified vehicles. Includes wheels (2)/ wheelie bar axle 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4).   Machined from tough 6061-T6...

TRAXXAS

Traxxas Aluminum Wheelie Bar Wheels for XRT - Dark Titanium, 7775A

These are Upgrade 6061-T6 Aluminum Wheelie Bar Wheels (dark titanium-anodized) for the Traxxas XRT Monster Race Truck and other specified vehicles. Includes wheels (2)/ wheelie bar axle 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4).   Machined...

TRAXXAS

Traxxas Steering Blocks for XRT, 7836

These are the Steering Blocks, left and right, for the Traxxas XRT Monster Race Truck.   These Steering Blocks were redesigned and beefed-up for the XRT. Standard in XRT, they can be used to upgrade X-Maxx for extreme duty and maximum strength...

TRAXXAS

Traxxas Caster Blocks C-Hubs - XRT, 7832

These are the Caster Blocks (C-Hubs), left and right, for the Traxxas XRT Monster Race Truck.   These caster blocks were redesigned and beefed-up for the XRT. Standard in XRT, they can be used to upgrade X-Maxx for extreme duty and maximum strength.

TRAXXAS

Traxxas Upper Rear Bulkhead - X-Maxx 8S/XRT, 7727R

This is the Traxxas Upper Rear Bulkhead for the X-Maxx 8S or XRT Monster Trucks.

TRAXXAS

Traxxas Steel Constant-Velocity Driveshaft Rebuild Kit - X-Maxx, 7751

This is the Traxxas Steel Constant-Velocity Driveshaft Rebuild Kit for the X-Maxx Monster Truck (7751).

TRAXXAS

Traxxas Steel Spur Gear 46-tooth 1.0 metric pitch - X-Maxx, 6447X

This is the Traxxas Steel Spur Gear (46-tooth, 1.0 metric pitch) for the 1/8 X-Maxx Monster Truck. Steel delivers the ultimate in durability and heat resistance for your X-Maxx Monster Truck.

TRAXXAS

Traxxas Lower Rear Bulkhead - X-Maxx, 7728

This is the Traxxas Lower Rear Bulkhead for the X-Maxx Monster Truck (7728).

TRAXXAS

Traxxas Suspension Pins 4x85mm - X-Maxx, 7741

These are the Traxxas Suspension Pins 4x85mm for the X-Maxx Monster Truck (7741). Made of hardened steel.

TRAXXAS

Traxxas Velineon VXL-8s ESC Cooling Fan - X-Maxx 8S, 3475

This is the Traxxas Velineon VXL-8s ESC Cooling Fan used on the X-Maxx 8S Monster Truck (3475).

TRAXXAS

Traxxas 35T Differential Ring Gear - X-Maxx 8S, 7792

This is the Traxxas 35T Differential Ring Gear for the X-Maxx 8S Monster Truck (7792). Use with TRA7790 and TRA7791 11-tooth differential pinion gears.

TRAXXAS

Traxxas Ball Bearings (5x11x4mm) (2), 4611

These are the 5x11x4mm Traxxas Ball Bearings for several Traxxas vehicles.

TRAXXAS

Traxxas 13-T Steel Pinion Gear - X-Maxx, 6486X

This is the Traxxas 13-T Pinion Gear for the X-Maxx Monster Truck (6486X). Hardened steel for use with steel spur gears. Has 1.0 metric pitch and fits 5mm shaft. Includes set screw.

TRAXXAS

Traxxas 17mm Wheel Nuts Splined Green Anodized - X-Maxx, 7758G

These are the Traxxas 17mm Splined Green Anodized Wheel Nuts for the X-Maxx Monster Truck (7758G).

TRAXXAS

Traxxas Steering Blocks Left and Right - X-Maxx, 7737

These are the Traxxas Steering Blocks Left and Right for the X-Maxx Monster Truck (7737).

TRAXXAS

Traxxas Ball Bearings (10x15x4mm, blue rubber sealed), 5119

This is a 2-pack of Traxxas 10x15x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Drive Cup and 3x8mm CS - X-Maxx, 7754

This is the Traxxas Drive Cup and 3x8mm CS for the X-Maxx Monster Truck (7754).

TRAXXAS

Traxxas Driveshaft Steel Constant-Velocity - X-Maxx, 7750

This is the Traxxas Driveshaft Steel Constant-Velocity for the X-Maxx Monster Truck (7750). Includes 1 shaft only, 160mm.

TRAXXAS

Traxxas 3x10mm Cap-Head Machine Screw, 2587

These are the 3x10mm Cap-Head Machine Screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas 20T Steel Pinion Gear - X-Maxx, 6494X

This is the Traxxas 20-T Pinion Gear for the X-Maxx Monster Truck (6494X). Hardened steel for use with steel spur gears. Has 1.0 metric pitch and fits 5mm shaft. Includes set screw.

TRAXXAS

Traxxas Lower Left Suspension Arm, Front or Rear - X-Maxx, 7731

This is the Traxxas Lower Left Suspension Arm, Front or Rear for the X-Maxx Monster Truck (7731).

TRAXXAS

Traxxas Screws, 4x12mm Button-Head Machine (hex) (6), 3937

This is a 4x12mm Button Head Screw Set for several Traxxas vehicles, including the Revo. On the Revo, it is used to mount the transmission skid plate.FEATURES: Steel construction; Black in color; Low-profile, button-head design; Hex drive (allen...

TRAXXAS

Traxxas Tailgate Protector for X-Maxx, 7712

This is the Traxxas Tailgate Protector for the X-Maxx Monster Truck (7712). Provides additional strength for rear and corners of X-Maxx for added durability. Includes 3x8mm flathead screw (4).