Traxxas Slash 4X4 Driveline & Steering

TRAXXAS

Traxxas Differential Output Shafts Steel-Splined Constant Velocity, 9057X

These are the Steel-Splined Constant Velocity Differential Output Shafts for the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas Rear Stub Axle Steel-Splined Constant Velocity, 9053X

This is the Steel-Splined Constant Velocity Rear Stub Axle for the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas Center Rear Drive Hub for Slash 4x4, 6888

This is the Center Rear Drive Hub for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Cross and Drive Pin Set for Repair of 1 Axle Shaft, 9059X

This is the Cross and Drive Pin Set to repair 1 axle shaft. Includes Cross pin (2)/ drive pin (2), and works with the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts, 9058X

This is the Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts used on the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models. Includes pins and hardware for one axle shaft.

TRAXXAS

Traxxas Steering Bellcranks and Servo Saver for Slash 4x4, 6845X

This is the Steering Bellcranks and Servo Saver for Set for the Traxxas Slash 4x4. Includes steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn. This part replaces the original Traxxas 6845.

TRAXXAS

Traxxas Front Stub Axle Steel-Splined Constant-Velocity, 6754

This is the Steel-Splined Constant-Velocity Front Stub Axle used on several Traxxas R/C vehicles. Includes 1 piece.

TRAXXAS

Traxxas Slipper Pressure Plate & Hub (aluminum alloy), 5556

These are the Slipper Press Plate and Hub for several Traxxas R/C vehicles. INCLUDES: One Slipper Press Plate; One Slipper Press Plate Hub.

TRAXXAS

Traxxas 49mm Camber Link Turnbuckles, 3643

These are the Traxxas 49mm Camber Link Turnbuckles for the Traxxas Stampede and Rustler (82mm center to center). Comes assembled with rod ends and hollow balls (1 left, 1 right).

TRAXXAS

Traxxas Turnbuckles, 58mm Camber Links, front or rear, 5539

These are the turnbuckles, 58mm camber links, for the front or rear of the Traxxas Jato. It is set of 2 and they come assembled with rod ends and hollow balls.

TRAXXAS

Traxxas Center Driveshaft Cover Slash 4x4, 6841

This is the Center Driveshaft Cover for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Input Shaft Slash 4x4, 6893

This is the Input Shaft for the Traxxas Slash 4x4.

TRAXXAS

Traxxas 39mm Camber Link Turnbuckles, 3644

These are the 39mm camber link turnbuckles for the Traxxas Stampede and Rustler (69mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right).

TRAXXAS

Traxxas Steering Blocks Left & Right Slash 4x4, 6837

These are the Left & Right Steering Blocks for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Screws 3x6mm Cap-Head Machine Hex, 2554

These are replacement 3x6mm cap-head machine screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Aluminum Bearing Adapter for Slipper Shaft, 6893X

This is the Aluminum Bearing Adapter for Slipper Shaft of the Traxxas Slash and Stampede 4X4 monster truck. Includes bearing adapter and 10x15x4mm ball bearing.

TRAXXAS

Traxxas Rod Ends (long w/hollow balls, 6), 2742

This is the 6-piece long Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas Slipper Pressure Plate/Hub (alloy), 5351

This is a Replacement Slipper Pressure Plate and Slipper Hub for several Traxxas vehicles, including the Revo series, Maxx series, Summit & Slayer. These are part of the slipper assembly.FEATURES: Aluminum constructionINCLUDES: One slipper pressure...

TRAXXAS

Traxxas Rear Heavy-Duty Driveshaft Assembly (left or right), 6852X

This is the Rear Heavy-Duty Driveshaft Assembly, left or right, with screw pin that comes fully assembled for the Slash 4X4 or Stampede 4X4 monster trucks. This item replaces the TRA6852.

TRAXXAS

Traxxas Blue Aluminum Center Driveshaft Slash 4x4, 6855

This is a Blue Anodized 6061-TS Aluminum Center Driveshaft for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Front Heavy-Duty Driveshaft Assembly (left or right), 6851X

This is the Front Heavy-Duty Driveshaft Assembly, left or right, with screw pin that comes fully assembled for the Slash 4X4 or Stampede 4X4 monster trucks. Replaces TRA6851.

TRAXXAS

Traxxas Silicone Grease, 1647

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.

TRAXXAS

Traxxas Rear Stub Axle Carriers, 1952

These are the axle housings (or hub carriers) used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Spur Gear 52T 0.8 Metric Pitch, 6843

This is a Traxxas Spur Gear 52T 0.8 Metric Pitch (compatible with 32-pitch).

TRAXXAS

Traxxas Steering Linkage for Rustler 4X4 and Others, 6846

This is Steering Linkage (3x20mm turnbuckle) for the Rustler 4X4, Slash 4X4, and other specified models. Includes rod ends (2)/ hollow balls (2). Fits the Following Models: Slash 4X4 VXL Slash 4X4 Slash VXL Stampede 4x4 VXL Stampede 4x4 Telluride...

TRAXXAS

Traxxas Grease, White Lithium, 5148

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as nylon gears.

TRAXXAS

Traxxas Caster Blocks C-Hubs Left & Right Slash 4x4, 6832

These are the Left & Right Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5552X

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 and other 1/10 scale Traxxas Trucks. Includes steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL/ 5.0mm NL. Replaces Traxxas 5552.

TRAXXAS

Traxxas Rod Ends Set (w/hollow balls & screws), 1942

This set of rod ends, balls, and screws is used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Metal 3x6mm Washers (12), 2746

These are 3x6mm Washers from Traxxas (12).

TRAXXAS

Traxxas Differential Carrier w/gaskets, 5381

This is the Diff Carrier/Gasket Set for the Traxxas Revo and Slayer.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5352X

This is the Traxxas Slipper Clutch Rebuild Kit for Revo, Summit and Maxx trucks. Includes steel disc, (3) friction pads, (2) springs, 2x9.8mm pin, 5x8mm MW, 5mm NL, 4mm NL.

TRAXXAS

Traxxas Front Steel Drive Hub Slash 4x4, 6888X

This is the Front Hardened Steel Drive Hub for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Stub Axle Pins (4), 2754

These are replacement stub axle pins for several Traxxas R/C vehicles. These pins slide through the axle and hold the wheel to the axle.

TRAXXAS

Traxxas Backplate Screws (3x8mm hex cap) w/wrench, 1552

These are replacement motor screws and washers for any 05 size motor.