Traxxas New E-Revo 2.0 Brushless (86086-4) Parts

TRAXXAS

Traxxas Heavy Duty Rod Ends (Push Rod) for E-Revo Brushless, 8647X

These are heavy duty rod ends (push rod) for the new Traxxas Next Generation E-Revo 2.0 Brushless Monster Truck. Includes 8 rod ends and comes assembled with hollow balls. These are replacement ends for #8619, 8619G, 8619R, and 8619X.

TRAXXAS

Traxxas Steel Heavy Duty Push Rods for E-Revo 2.0, 8619

These are the Steel Heavy Duty Push Rods for the new Traxxas Next Generation E-Revo 2.0. Comes assembled with rod ends. Includes 2 rods.

TRAXXAS

Traxxas Steel 5.0mm Toe Link for E-Revo, 8638

This is the Steel 5.0mm Toe Link for the new Traxxas Next Generation E-Revo. Works front or rear.

TRAXXAS

Traxxas Low Profile Wing Mounts for E-Revo Brushless, 8616

These are the Low Profile Wing Mounts for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas Front Right Suspension Arms for E-Revo, 8631

These are the Front Right Suspension Arms for the new Traxxas Next Generation E-Revo. They are heavy-duty and for the adjustable wheelbase. Includes (1) upper and (1) lower.

TRAXXAS

Traxxas E-Revo Chassis, 8622

This is the replacement Chassis for the new Traxxas Next Generation E-Revo. Requires #8629 and #8630 bulkheads.

TRAXXAS

Traxxas Motor Mount Hinge Post for E-Revo Brushless, 8661

This is the Motor Mount Hinge Post for the new Traxxas Next Generation E-Revo Brushless. Includes 5x25mm BCS (1)/ 4x16mm CS with split and flat washer (1).

TRAXXAS

Traxxas Roof Skid Plate for E-Revo, 8617

This is the Roof Skid Plate for the new Traxxas Next Generation E-Revo. Includes 3x12mm CS (4).

TRAXXAS

Traxxas 3.8" Black Wheels (17mm spline) for New E-Revo, 8671

These are the replacement 3.8" Black Wheels (17mm spline) for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Steel Center Differential Output Gear for E-Revo Brushless, 8684

This is the Steel Center Differential Output Gear for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Skidplate Set Front and Rear for E-Revo, 8637

This is the Front and Rear Skidplate Set for the new Traxxas Next Generation E-Revo. Includes 3x10 BCS (6)/ 3x30 BCS (1). Fits #8629 & 8630 bulkheads.

TRAXXAS

Traxxas Differential Ring and Pinion Gears for E-Revo BL, 8679

These are the Differential Ring and Pinion Gears for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Cush Drive Housing for E-Revo Brushless, 7793X

This is the replacement Cush Drive Housing for the new Traxxas Next Generation E-Revo Brushless. Includes front and rear halves.

TRAXXAS

Traxxas 17mm Blue Wheel Hubs for E-Revo Brushless, 8654

These are the 17mm Splined Blue Anodized Aluminum Wheel Hubs for the new Traxxas Next Generation E-Revo Brushless. Includes hubs (4)/ 4x5 GS (4) / 3x14mm pin (4).

TRAXXAS

Traxxas Center Half Shafts for E-Revo Brushless, 8655

These are the Center Half Shafts for the new Traxxas Next Generation E-Revo Brushless. Includes internal splined (2) / external splined (2). Plastic parts only.

TRAXXAS

Traxxas Rear Right Suspension Arms for E-Revo, 8633

These are the Rear Right Suspension Arms for the new Traxxas Next Generation E-Revo. They are heavy-duty and for the adjustable wheelbase. Includes (1) upper and (1) lower.

TRAXXAS

Traxxas Axle Carriers for E-Revo, 8635

These are the Axle Carriers (left and right) for the new Traxxas Next Generation E-Revo. They are heavy-duty and for the adjustable wheelbase. Use with 8x16mm & 17x26mm ball bearings. Includes dust boot retainers (4).

TRAXXAS

Traxxas Metal 36-Tooth Output Gear for E-Revo BL, 8685

This is the Metal 36-Tooth Output Gear for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Heavy Duty Steel CV Driveshaft for E-Revo, 8650

This is the Heavy Duty Steel Constant-Velocity Driveshaft (122.5mm) for the new Traxxas Next Generation E-Revo. Includes shaft only.

TRAXXAS

Traxxas Front Left Suspension Arms for E-Revo, 8632

These are the Front Left Suspension Arms for the new Traxxas Next Generation E-Revo. They are heavy-duty and for the adjustable wheelbase. Includes (1) upper and (1) lower.

TRAXXAS

Traxxas Heavy Duty Rod Ends (toe links) for E-Revo Brushless, 8646

These are heavy duty rod ends (toe links) for the new Traxxas Next Generation E-Revo Brushless. Includes 8 rod ends and comes assembled with hollow balls.

TRAXXAS

Traxxas Transmission Yokes for E-Revo, 8658

These are the Transmission Yokes for the new Traxxas Next Generation E-Revo. Includes 4x15mm screw pins (2).

TRAXXAS

Traxxas Talon EXT 3.8" Tires for New E-Revo 2.0, 8670

These are the replacement Talon EXT 3.8" Tires for the new Traxxas Next Generation E-Revo 2.0. Includes foam inserts.

TRAXXAS

Traxxas Differential Gear Set for E-Revo Brushless, 8682

This is the Differential Gear Set for the new Traxxas Next Generation E-Revo. Includes spider gears (4), spider gear shaft (2).

TRAXXAS

Traxxas Transmission Skidplate for E-Revo Brushless, 5637X

This is the Black Nylon Transmission Skidplate for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas Rear Left Suspension Arms for E-Revo, 8634

These are the Rear Left Suspension Arms for the new Traxxas Next Generation E-Revo. They are heavy-duty and for the adjustable wheelbase. Includes (1) upper and (1) lower.

TRAXXAS

Traxxas Rear Body Support for E-Revo Brushless, 8613

This is the Rear Body Support for the new Traxxas Next Generation E-Revo Brushless. Includes 3x12mm CS (4).

TRAXXAS

Traxxas 3.8" Orange Wheels (17mm spline) for New E-Revo, 8671A

These are the replacement 3.8" Orange Wheels (17mm spline) for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas 17mm Green Wheel Hubs for E-Revo Brushless, 8654G

These are the 17mm Splined Green Anodized Aluminum Wheel Hubs for the new Traxxas Next Generation E-Revo Brushless. Includes hubs (4)/ 4x5 GS (4) / 3x14mm pin (4).

TRAXXAS

Traxxas Steel Differential Output Gears for E-Revo Brushless, 8683

These are the Steel Differential Output Gears for the new Traxxas Next Generation E-Revo.

TRAXXAS

Traxxas Motor Plate for E-Revo Brushless, 8690

This is the Motor Plate for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas Steel Drive Cups for E-Revo Brushless, 8652

These are the Machined Steel Drive Cups for the new Traxxas Next Generation E-Revo Brushless. Includes (2)/ 4x17mm screw pins (2).

TRAXXAS

Traxxas Front Bulkhead for E-Revo, 8630

This is the Front Bulkhead (upper and lower) for the new Traxxas Next Generation E-Revo. Includes 4x12mm BCS (6). Requires #8622 chassis.

TRAXXAS

Traxxas Aluminum Differential Carrier for E-Revo, 8681X

This is the Aluminum Differential Carrier for the new Traxxas Next Generation E-Revo. Includes x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 MW.

TRAXXAS

Traxxas 3x35mm Cap-Head Machine Screws for E-Revo Brushless, 3971

These are the 3x35mm Cap-Head Machine Screws (hex drive) for the new Traxxas Next Generation E-Revo Brushless. Includes 6 screws.

TRAXXAS

Traxxas Gearbox Halves Front and Rear for E-Revo, 8691

These are the Gearbox Halves Front and Rear for the new Traxxas Next Generation E-Revo. Includes idler gear shaft.

TRAXXAS

Traxxas Expander Box Seal Kit, 6552

This is the Expander Box Seal Kit for several specified Traxxas R/C vehicles. Includes o-ring, seals, and silicone grease.

TRAXXAS

Traxxas Body Mounts Front and Rear for E-Revo Brushless, 8615

These are the Body Mounts Front and Rear for the new Traxxas Next Generation E-Revo Brushless. Includes 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1).

TRAXXAS

Traxxas Heavy Duty Rod Ends (Push Rod) for E-Revo Brushless, 8647

These are heavy duty rod ends (push rod) for the new Traxxas Next Generation E-Revo Brushless. Includes 8 rod ends and comes assembled with hollow balls.

TRAXXAS

Traxxas Rear Bulkhead for E-Revo 2.0, 8629

This is the Rear Bulkhead (upper and lower) for the new Traxxas E-Revo 2.0. Requires #8622 chassis.

TRAXXAS

Traxxas Clipless Body Posts for E-Revo Brushless, 8614

These are the Clipless Body Posts for the new Traxxas Next Generation E-Revo Brushless. Includes front and rear posts.

TRAXXAS

Traxxas Driveshaft Rebuild Kit for E-Revo, 8651

This is the Driveshaft Rebuild Kit for the new Traxxas Next Generation E-Revo. Includes cross pin (2)/ 16mm pin (2). Repairs 2 driveshafts.

TRAXXAS

Traxxas Chassis Supports for E-Revo Brushless, 8620

These are the Chassis Supports, front and rear, for the new Traxxas Next Generation E-Revo Brushless. Includes 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1).

TRAXXAS

Traxxas Stub Axle for E-Revo Brushless, 8653

This is the Stub Axle for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas 12x21x5mm Ball Bearings for E-Revo Brushless, 5101

These are the Blue Rubber Sealed 12x21x5mm Ball Bearings for the new Traxxas Next Generation E-Revo Brushless.

TRAXXAS

Traxxas Steel Push Rod for E-Revo 2.0, 8618

This is the Steel Push Rod for the new Traxxas Next Generation E-Revo 2.0. Comes assembled with rod ends. Includes 2 rods.