Traxxas 1/16 Rally VXL Transmission & Gearing

TRAXXAS

Traxxas Pinion Gear 48P 31-Tooth, 2431

This is an optional 31-tooth pinion gear for the Traxxas Rustler VXL.

TRAXXAS

Traxxas Gear Cover/Motor Mount Hinge Post - 1/16, 7077R

This is the Telemetry-Ready Gear Cover/Motor Mount Hinge for use on several Traxxas 1/16 vehicles, inlcuding the E-Revo and Slash VXL. Includes gear cover, motor mount hinge post, 3x10mm CS with split and flat washers (1), and 3x8mm BCS (1).

TRAXXAS

Traxxas Pinion Gear 48P 25-Tooth, 4725

This is an optional 25-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Ball Bearings (blue rubber sealed, 8x12x3.5mm), 7020

These are the 8x12x3.5mm Rubber Sealed Ball Bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 28-Tooth, 4728

This is an optional 28-tooth pinion gear for the Traxxas 4-TEC and other Traxxas vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 23-Tooth, 2423

This is an optional 23-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 16-Tooth, 2416

This is an optional 16-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 26-Tooth, 2426

This is an optional 26-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 19-Tooth, 2419

This is an optional 19-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Gearbox Halves (front & rear), 7091

These are the Front and Rear Gearbox Halves for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Differential Cover Plates, Gaskets, and O-Rings, 7080

These are the Front and Rear Differential Cover Plates for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Slipper Clutch Complete Set 1/16, 7152

This is the Complete Slipper Clutch for use on the Traxxas 1/16 E-Revo and Slash vehicles.

TRAXXAS

Traxxas Ball Bearings (blue rubber sealed, 4x8x3mm), 7019

These are the 4x8x3mm Rubber Sealed Ball Bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

TRAXXAS

Traxxas Spur Gear (45-tooth), 7045R

This is the optional 45T Spur Gear for use on the Traxxas 1/16 E-Revo, Slash VXL, and several other Traxxas 1/16 Vehicles. This replaces the original Traxxas part #7045.

TRAXXAS

Traxxas Spur Gear (50-tooth), 7046R

This is the optional 50T Spur Gear for use on the Traxxas 1/16 E-Revo, Slash VXL, and several other Traxxas 1/16 Vehicles. This replaces the original Traxxas part #7046.

TRAXXAS

Traxxas Spur Gear (55-tooth), 7047R

This is the optional 55T Spur Gear for use on the Traxxas 1/16 E-Revo, Slash VXL, and several other Traxxas 1/16 Vehicles. This replaces the original Traxxas part #7047.

TRAXXAS

Traxxas Motor Plate 1/16, 7090

This is the Motor Plate for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Hollow Balls 1/16 (20), 7028

Traxxas Hollow Balls 1/16 (20)