MENU
A performance rig built to endure. When hitting the trail, you want to do it with confidence and the answer is the Team Associated Enduro Ecto Portal RTR Trail Truck LiPo Combo!
At the heart of the Enduro Ecto Portal RTR is their revolutionary Stealth X gearbox. Although the exterior appears to have a conventional 3-gear transmission look, the inside is far from conventional. The Stealth X features the ability to adjust the rear drive ratio independently of the front drive across three levels: stock overdrives the front end 5.7% (installed in RTR), option 1 provides a one-to-one drive ratio front-to-rear (available separately), and option 2 overdrives the front end 11.83% (included with RTR). Feeding the power to the tires are 3-piece telescopic driveshafts with an extruded aluminum center section, universal front drive axles, and hardened steel ring and pinion gears. With the Enduro drivetrain, delivering useful power will not be an issue.
As with all Enduro chassis, the steering link assembly has been relocated from the conventional location to behind the axle (BTA). This feature greatly improves approach angle and front-end clearance, making rough terrain much easier to handle. The Ecto Portal RTR features high-clearance portal axles. These portal axles include all-metal gears, ball bearings, and a larger pocket for a heavier-duty inner input bearing. With almost an inch more clearance than their standard straight axles, these axles are a perfect fit for the Enduro line-up.
The Enduro Trail Truck comes ready for adventure right out of the box, with performance-driven electronics. The ultra smooth and powerful 14-turn 5-slot brushed crawler motor is matched with a 2-in-1 electronic speed controller and receiver with built-in LED controller. Controlling the beast on the trail is a 4-channel 2.4GHz radio and Reedy Power high torque metal gear servo.
FULLY RTR: The #40119C LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug.
CHASSIS FEATURES:
- PORTAL AXLES: When it comes to rock crawling, ground clearance is crucial. That's why the Enduro Ecto Portal RTR includes high-clearance portal axles. With almost an inch of added center axle clearance, over standard straight axles, getting over tough obstacles is a breeze. To battle the massive amount of torque inherent with portal axles, they not only utilized metal gears throughout, but also use six screws to hold the portal gear boxes tight. With that many screws it means a stronger portal box and less chance of gears pulling apart under heavy loads.
- BTA STEERING AND ALUMINUM STEERING PLATES: Behind-the axle steering provides better approach angles, more clearance, and a cleaner look. Bolt-on aluminum steering plates allow for more adjustments, strength, and future modifications.
- INTEGRATED SERVO WINCH MOUNT: Mounting a winch directly to the chassis is the strongest and most reliable spot on any trail rig. Positioned alongside the steering servo for overall chassis balance and weight distribution.
- THREADED ALUMINUM SHOCK BODIES: Threaded aluminum and fluid-filled, these shocks keep the vehicle stable on the trail and retain oil even in the roughest terrain.
- REEDY POWER CRAWLER MOTOR: The Reedy Power 5-slot 14-turn brushed crawler motor provides ample torque with a smooth power delivery. This allows for slow precise acceleration while maintaining consistent power over rough terrain and obstacles.
- 2-in-1 ESC/RECEIVER UNIT: The Ecto Portal RTR comes equipped with a 2-in-1 brushed electronic speed control (ESC) and receiver unit with built-in LED lighting controller.
- OPTIONAL GEARS: If more underdrive is desired, we also offer an optional Factory Team 12/23 gear set (sold separately) with approximately 36% underdrive for serious rock crawler addicts.
Included is their performance-proven Stealth X transmission that features the ability to adjust the rear drive ratio. In the box you get the standard 5.7% and 11.83% gear options. Paired with their portal axles with zero percent underdrive, this is the perfect mild setup for the average crawler. If even more underdrive in the rear is desired, an optional 12/23 tooth gear set (#42372) is available separately for an additional 36% overdrive from axle-to-axle alone!
Body Features:
- Thermoformed polycarbonate body styled after early pickup trucks
- Narrow body design for increased performance and clearance
- Clear windows
- Dropped bed design
- Adjustable injection-molded front bumper
- Injection-molded fairlead
- Injection-molded mock winch
- Injection-molded action cameras and antennas included (not installed)
- Licensed 1.9" x 4.65" General Grabber X3 tires
FEATURES:
- The #40119C LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug.
- High-clearance portal axles
- CMS (Chassis Mounted Servo)
- Adjustable front track bar
- Universal front drive axles
- Stamped steel frame rails
- 12mm wheel hexes
- Adjustable front bumper mount
- Two battery boxes
- Aluminum motor plate
- Adjustable body posts
- Optimized ball cups for more fluid axle articulation
- Adjustable rear shock tower mount positions
- Telescopic driveshafts front and rear
- Extruded aluminum driveshaft splines
- Splined front axle with adjustable caster
- Metal gears throughout axles
- Increased inner axle input bearing
- Machined steel top shaft
- Steel servo horn
- Heavy-duty 5mm diameter steel links
- Metal ball bearings included
TECHNICAL SPECS:
- Power Source: Electric
- Terrain: Off-Road
- Body Style: Truck
- Scale Size: 1:10 Scale
- Assembly Level: Ready-To-Run
- Length: 462mm (18.19in)
- Width: 236mm (9.29in)
- Wheelbase: 325mm (12.8in)
- Drive: 4WD
- INCLUDES:
- Battery pack (#758 Reedy 7.4V 2S LiPo Battery)
- Battery charger (#27201 Reedy Compact Balance Charger)
- REQUIRES:
- Four (4) AA batteries for transmitter