GIANT TRAXXAS PARTS CLOSEOUT/LIQUIDATION SALE

TRAXXAS

Traxxas Front Bumper with Support for Rustler 4X4, 6736

This is the Front Bumper with Support for the Rustler 4X4 XL-5 (brushed) and VXL (brushless) models.

TRAXXAS

Traxxas Body Roof Skid Plate for Hoss 4x4 VXL, 9017

This is the Body Roof Skid Plate for the 1/10 Traxxas Hoss 4x4 VXL. Includes left and right pieces and 3x8mm CS (4).

TRAXXAS

Traxxas Inner Fenders for TRX-4 Ford Bronco, 8072

These are the Inner Front and Rear Fenders for the Traxxas TRX-4 Ford Bronco. Includes fenders (2)/ rock light covers (8)/ battery plate/ 3x8 flathead screws (4).

TRAXXAS

Traxxas Rubber Driveshaft Boots (2), 5459

These are the replacement Drive Shaft Boots for several Traxxas R/C vehicles, including the Revo.

TRAXXAS

Traxxas Chrome Bumper Push Bar for TRX-4 Ford Bronco, 8066

This is the Chrome Bumper Push Bar for the Traxxas TRX-4 Ford Bronco. Fits #8069 bumper.

TRAXXAS

Traxxas Upper Suspension Arms for the Unlimited Desert Racer, 8531

These are the Upper Suspension Arms (left & right) for the Traxxas Unlimited Desert Racer. Comes assembled with hollow balls.

TRAXXAS

Traxxas Gear/Motor Plate Access Cover for 1/16 w/550 motors, 7379R

This is the Traxxas Gear/Motor Plate Access Cover for 1/16 vehicles with 550 motors. Includes motor mount hinge post, 3x10mm CS w/split and flat washers (1), 2.5x4mm CS (2), 3x8mm BCS (1).

TRAXXAS

Traxxas Telemetry Temperature and Voltage Sensor, 6524

This is the Traxxas Telemetry Temperature and Voltage Sensor. Works with the Traxxas XO-1 4WD Supercar.

TRAXXAS

Traxxas 52-Tooth Steel Spur Gear for Sledge 1/8 Monster Truck, 9652

This is the 52-Tooth Steel Spur Gear (1.0 metric pitch) for the 1/8 Traxxas Sledge Monster Truck. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different...

TRAXXAS

Traxxas Steel Differential Output Cup for Sledge 1/8 Monster Truck, 9583

This is the Steel Differential Output Cup (front or rear) for the 1/8 Traxxas Sledge Monster Truck. Includes output cup (1)/ 2.5x12mm pin (1).

TRAXXAS

Traxxas Metal Steering Servo Horn for Sledge 1/8 Monster Truck, 9544

This is the Metal Steering Servo Horn for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Steel Outer Rear Suspension Pins for Sledge 1/8 Monster Truck, 9543

These are the Steel Outer Rear Suspension Pins for the 1/8 Traxxas Sledge Monster Truck. Includes 3.5x56.7mm pins (2)/ M3x0.5mm NL, flanged (2).

TRAXXAS

Traxxas Wing Mount for Sledge 1/8 Monster Truck, 9518

This is the Wing Mount for the 1/8 Traxxas Sledge Monster Truck.

TRAXXAS

Traxxas Steel Front CV Driveshaft 5x133.5mm for Sledge 1/8 Monster Truck, 9558

This is the Steel Front Constant-Velocity Driveshaft for the 1/8 Traxxas Sledge Monster Truck. Includes (1) 5x133.5mm shaft.

TRAXXAS

Traxxas Battery Hold-Down for Hoss 4x4 VXL, 9026

This is the Battery Hold-Down for the 1/10 Traxxas Hoss 4x4 VXL. Includes battery clip/ hold-down post/ screw pin/ pivot post screw.

TRAXXAS

Traxxas Tailgate Protector for Hoss 4x4 VXL, 9012

This is the Tailgate Protector for the 1/10 Traxxas Hoss 4x4 VXL. Includes 3x10mm flat-head screw (3).

TRAXXAS

Traxxas Rear Bumper with Mount for Rustler 4X4, 6737

This is the Rear Bumper with Mount for the Rustler 4X4 XL-5 and VXL models.

TRAXXAS

Traxxas Screws, 3x15mm flat-head machine (hex drive) (6), 3646

This is the 3x15mm flat-head machine screw set (hex drive) (6)

TRAXXAS

Traxxas Pipe Coupler for TRA5152 Pipes (TRX 2.5, 2.5R, 3.3), 5246

This is the Pipe Coupler for Traxxas Pipes (TRX 2.5, 2.5R, 3.3)

TRAXXAS

Traxxas Screws 3x18mm Roundhead Machine, 2565

These are Traxxas 3x18mm Roundhead Machine Screws for the Traxxas E-Maxx.

TRAXXAS

Traxxas Heavy-Duty Differential Output Yokes with Screw Pins, 6828X

These are the Heavy-Duty Differential Output Yokes with Screw Pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Heavy Duty 16-T Pinion Gear (32-pitch), 3946X

This is a 16-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Caster Blocks (C-Hubs), left and right - X-Maxx, 7732

These are the Traxxas Caster Blocks (C-Hubs), left and right, for the X-Maxx Monster Truck (7732).

TRAXXAS

Traxxas Clutch Shoes & Spring (N. Rustler/N.Sport/N.Stampede), 4146

This is the Stock Replacement Clutch Shoes and Spring set for the Nitro Stampede, Nitro Rustler & Nitro Sport. These shoes are located underneath the clutch bell.

TRAXXAS

Traxxas Center Driveshaft Assembly Aluminum - X-Maxx, 7755

This is the Traxxas Center Driveshaft Aluminum Assembly for the X-Maxx Monster Truck (7755).

TRAXXAS

Traxxas Propeller for Blast Boat, 3834

This is the Propeller for the Traxxas Blast Electric R/C boat.

TRAXXAS

Traxxas Inner Drive Cups for Steel CV Driveshafts on Ford GT & 4-Tec 2.0, 8353X

These are the Traxxas Inner Drive Cups for the Steel Constant-Velocity Driveshafts used on the Ford GT, Mustang GT, and 4-Tec 2.0 AWD Chassis Cars. Includes screw pins (2).

TRAXXAS

Traxxas Anaconda 2.2" Wide Front Tires Bandit, 2479

This is the Anaconda 2.2" Soft Compound Wide Front Tire Set with foam inserts for the Traxxas Bandit vehicle.

TRAXXAS

Traxxas Front Chassis Brace for Maxx 4S, 8921

This is the Front Chassis Brace for the Traxxas Maxx 4S Monster Truck. This is a direct replacement part.

TRAXXAS

Traxxas Steering Blocks for Rustler, Bandit, Stampede 2WD, 3636

These are the replacement steering blocks (#3636) for the Traxxas Rustler, Stampede & Bandit XL-5 2WD.

TRAXXAS

Traxxas Black Lower Chassis for Slash 2WD Low-CG Conversion Kit, 5831

This is the optional Traxxas Black Lower Chassis for the new Slash 2WD Low-CG Conversion Kit.

TRAXXAS

Traxxas Shock Shafts (steel, chrome finish, xx-long), 2656

These are the replacement steel chrome finish XX-long Shock Shafts from Traxxas.

TRAXXAS

Traxxas Pinion Gear 48P 16-Tooth, 2416

This is an optional 16-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas 55-T Spur Gear for 4-Tec 2.0 VXL, 8358

This is the Traxxas 55-Tooth Spur Gear for the 4-Tec 2.0 VXL AWD Chassis Car.

TRAXXAS

Traxxas Body Posts Front and Rear for TRX-4 Sport, 8115

These are the Body Posts Front and Rear for the Traxxas TRX-4 Sport Edition.

TRAXXAS

Traxxas Front Bulkhead for Maxx 4S, 8920

This is the stock replacement Front Bulkhead for the Traxxas Maxx 4S Monster Truck. Includes upper and lower pieces.

TRAXXAS

Traxxas Cooling Head Gaskets TRX 3.3, 5292

This is a set of Cooling Head Gaskets for the Traxxas TRX 3.3 engine. Includes 0.20, 0.30, 0.40mm (1 each).

TRAXXAS

Traxxas Spur Gear 48P 83-Tooth, 4683

This is an optional spur gear for certain Traxxas VXL units with the torque control slipper clutch.

TRAXXAS

Traxxas Differential Gear Set for E-Revo Brushless, 8682

This is the Differential Gear Set for the new Traxxas Next Generation E-Revo. Includes spider gears (4), spider gear shaft (2).

TRAXXAS

Traxxas Large Rod Ends, Revo/Summit/Slayer (for rear toe link only) (4), 5348

TraxxaThis is a set of Rod Ends for the Traxxas Revo, Slayer, or Summit. They are to be used on the Rear Toe-Link Rods only. Ring on the rod end shaft denotes for Rear Toe Links only. If Pivot Balls are needed, use TRA5355.FEATURES: Plastic construction;...

TRAXXAS

Traxxas U-Joints Villain EX, 1539R

This is the replacement U-Joint Set for the Traxxas Villain EX.

TRAXXAS

Traxxas Pinion Gear 48P 26-Tooth, 2426

This is an optional 26-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Differential Carrier for Maxx 4S, 8981

This is the stock replacement Differential Carrier for the Traxxas Maxx 4S Monster Truck. Includes x-ring gasket/ o-ring (2)/ 10x19.5x0.5 TW.

TRAXXAS

Traxxas Bumper (front), 2735

This is the replacement front bumper for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Rod Ends (long w/hollow balls, 6), 2742

This is the 6-piece long Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas Blue Aluminum Turnbuckle Toe Links 61mm, 2336A

These are optional Blue Aluminum 61mm Turnbuckle Toe Links with Rod Ends and Hollow Balls for the Traxxas Stampede.

TRAXXAS

Traxxas Blue Aluminum Center Driveshaft for 4-Tec 2.0 VXL, 8355X

This is the Traxxas Blue Aluminum Center Driveshaft for the 4-Tec 2.0 VXL AWD Chassis Car. Includes pin.

TRAXXAS

Traxxas Shock Shafts Steel (long) (2), 1664

This is the replacement front shock shafts for the Traxxas LSII.

TRAXXAS

Traxxas Driveshaft Assembly (2) for 1/18 LaTrax, 7650

This is the Traxxas Driveshaft Assembly for the 1/18 LaTrax Teton Monster Truck and Desert Prerunner. Works on front or rear. Includes 2 assemblies.

TRAXXAS

Traxxas Wheels, Gemini Black Chrome (2), 7172A

These are the Black Chrome Gemini Wheels for use on the Traxxas 1/16 E-Revo 4WD RTR.

TRAXXAS

Traxxas Steering Arm Set 1/16 (upper & lower), 7043

Traxxas Steering Arm Set 1/16 (upper & lower). Includes the following:steering linkservo hornservo saverservo saver springservo horn mountball stud (2)shock mounts, front & rear2.5x18mm CS (4)

TRAXXAS

Traxxas Button-Head Machine Screws, 3x6mm, 2575

This is a package of six 3x6mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Suspension Arms Front and Rear for the 1/18 LaTrax Rally Car, 7531

This is the Traxxas Suspension Arms Front and Rear for the 1/18 LaTrax Rally Car.

TRAXXAS

Traxxas Rear Stub Axle Carriers, 1952

These are the axle housings (or hub carriers) used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Spur Gear 54-tooth 1.0 metric pitch - X-Maxx/XO-1, 6449

This is the Traxxas Spur Gear, 54-tooth, 1.0 metric pitch, for the X-Maxx and XO-1 4WD Supercar.

TRAXXAS

Traxxas Body Mounts for Rustler 4X4, 6720

These are the Front and Rear Body Mounts for the Rustler 4X4 XL-5 and VXL models. Includes 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1).

TRAXXAS

Traxxas Driveshaft Assembly Front and Rear for the 1/18 LaTrax Rally Car, 7550

This is the Traxxas Driveshaft Assembly Front and Rear for the 1/18 LaTrax Rally Car.

TRAXXAS

Traxxas Spur gear (68-tooth; 0.8 metric pitch), 3961

This is the 68-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Rotor Blade Wrench 2mm Hex - Aton Quad, 7942

This is the Traxxas Rotor Blade Wrench 2mm Hex for the Aton Quad (7942).

TRAXXAS

Traxxas Suspension Screw Pin Set (T-Maxx, E-Maxx), 4939

This is the Suspension Screw Pin Set for use with the bulkheads on the Traxxas E-Maxx and T-Maxx 3.3.