MENU
| NOTE: This "Kit" version comes with the airframe, motor and fan. All other electronics (battery and radio system) are sold separately. (Note: The manual shown is for the RTF version and shows items not included in the kit. The kit is also unpainted white foam.) |
In the early 1950s, with Cold War tensions on the rise, the U.S. military required better strategic reconnaissance to help determine Soviet capabilities and intentions. It was thought an aircraft that could fly at 70,000 feet would be beyond the reach of Soviet fighters, missiles, and even radar. Phase 3 brings the iconic U2 spyplane to life in a high performance EDF that represents outstanding value. Manufactured from lightweight foam in a ready-to-fly format so youll be ready for your first exciting mission in no time!
This model comes from the factory with three servos already installed, together with a factory fitted brushless motor, fan and ESC so there is very little work required to complete. The included RX-500 Airtronics receiver is compatible with all Airtronics and Aero-Sport 2.4Ghz radios.
Flying the U-2 Spyplane
The Phase 3 U-2 Spyplane is essentially a powered glider and it can be flown in a very scale-like manner. While it is not suitable for beginners, it does make a very good second aileron model. With the assistance of a helper, switch on the transmitter, then connect a fully charged Li-Po battery. Refit the canopy and check the control throws. If there is any wind, ask you helper to point the model into it. Open the throttle fully, then have your helper launch the U-2 slightly nose down with a firm push keeping the wings level. Allow the model to fly straight and continue to hold the power on until sufficient height has been gained.
The U-2 is best flown smoothly, trading height for speed for gentle aerobatic maneuvers. The wings will flex in flight - as did the fullsize - but you should avoid pulling very high G manouevres when flying at full speed or after a steep dive to avoid over-stressing the airframe.
Landing presents no difficulties and the U-2 can be simply lined up into the wind and the motor power reduced until the model settles into its glide path. Once landed, please unplug and remove the Li-Po battery from the model and allow it to cool completely before recharging.
This model comes from the factory with three servos already installed, together with a factory fitted brushless motor, fan and ESC so there is very little work required to complete. The included RX-500 Airtronics receiver is compatible with all Airtronics and Aero-Sport 2.4Ghz radios.
Flying the U-2 Spyplane
The Phase 3 U-2 Spyplane is essentially a powered glider and it can be flown in a very scale-like manner. While it is not suitable for beginners, it does make a very good second aileron model. With the assistance of a helper, switch on the transmitter, then connect a fully charged Li-Po battery. Refit the canopy and check the control throws. If there is any wind, ask you helper to point the model into it. Open the throttle fully, then have your helper launch the U-2 slightly nose down with a firm push keeping the wings level. Allow the model to fly straight and continue to hold the power on until sufficient height has been gained.
The U-2 is best flown smoothly, trading height for speed for gentle aerobatic maneuvers. The wings will flex in flight - as did the fullsize - but you should avoid pulling very high G manouevres when flying at full speed or after a steep dive to avoid over-stressing the airframe.
Landing presents no difficulties and the U-2 can be simply lined up into the wind and the motor power reduced until the model settles into its glide path. Once landed, please unplug and remove the Li-Po battery from the model and allow it to cool completely before recharging.
- Wingspan: 1,690mm (66 1/2 Inches)
- Length: 1,030mm (40 1/2 Inches)
- Simple and Quick to Assemble
- Durable, Lightweight Factory-Moulded Foam Airframe
- EPP Foam Construction is Easily Repaired and Damage Resistant
- Wings are Reinforced with 3 Internal Carbon Fiber Rods
- Plug-In Wings Make it Easy to Transport
- No Glue Required!
- Realistic Stealth Color Scheme
- Easy Access to Battery Via Large Canopy
- Custom, Powerful Brushless Motor Included
- High Performance Fan Unit Included
- Smooth, Fast and Stable Flying
- REQUIRES: Radio System, LiPo Battery, Servos
ACCESSORIES & EXTRAS (select at right):
- "AA" Alkaline Batteries