MENU
YES, WE HAVE THEM!!!
Designed, constructed and styled with one aim in mind . . . performance!
Identical airframe to the original standard "Sport" version, but with a new fan, motor, and ESC to explore 4-cell performance. The sleek, precise, EPS foam moldings and high-quality hardware are exactly as you would expect from Phase 3 and assembly is both quick and enjoyable. Actually, a couple of hours will have it done.
The sleek delta-wing design and careful use of the fuselage allows the Squall to explore its entire speed envelope with control and stability. Even the surface finish has been optimized to enhance performance by keeping it as smooth as possible and small fairings are provided for each servo. The powerful elevons can roll the Squall at an amazing rate (aka a blurr!) and the ability to loop in its own length has to be seen to be believed. The added dimension of a rudder on the Squall opens up the possibility of some radical maneuvers in yaw too.
With 4-cell power, vertical is almost unlimited and speed is mind- blowing. You will need to be quick-witted with this one!
The completely new fan unit, with a 3-blade 64mm impeller, 3400kv outrunner motor and 45A ESC deliver thrust at an amazing rate and power the Squall through some of the widest loops and wing-overs you can imagine. It really is that good! It is recommended that you use a 2500mAh 30C battery (Impulse or Intellect) as a minimum, so that battery life is maintained when you're having that much fun. You might need more than one pack though, as the Squall is addictive!
For those that can never have enough performance and really want to challenge their pilot skills, there is an optional Vectored Thrust unit. With power substantially over 1:1 you can be sure of enough thrust to do just about anything. Jet hovering anyone???
(Hi-Perf version with vectored thrust shown above)
- Moulded Lightweight Airframe
- High-Efficiency Ducted Fan Unit Included
- High-RPM Brushless Motor Included
- 45 Amp Brushless Speed Controller Included
- Extensive Decal Sheet Included
- Fast and Easy Assembly
- Over 100 High-Resolution Color Photos to Guide You
| Specification | |||||
|
| ||||
|
| ||||
|
| ||||
|
| ||||
Note that the manual states 20C-rated batteries, which will work fine. However, for best performance we recommend 30C packs.
TECHNICAL SPECS:
- Skill Level: Intermediate to Advanced
- Length: 885mm (34.85in)
- Wingspan: 650mm (25.6in)
- Weight: 650g 780g (22.9 27.5ozs)
- Thrust: 930g
- Motor: 3400KV (14.8v) Brushless (INCLUDED)
- ESC: 45A (14.8v) Brushless (INCLUDED)
- Assembly Time: Approximately 2 hours
- REQUIRES:
- 4-channel radio/receiver with elevon mixing
- (3) 9-10g micro servos
- 3-cell 2500mAh 20C Li-Po battery (30C recommended)
- LiPo Balancing Charger
- (3) 300mm Servo Extension Leads
- 4mm Gold Connectors
- Rapid Epoxy (do not use CA glues)
- Venom 300mm Servo/Battery Extensions
- Energizer or Venom "AA" Alkaline Batteries