call toll-free 866-729-4940
  • Remote Control Trucks
  • Remote Control Cars
  • Remote Control Helicopters
  • Remote Control Boats
  • Remote Control Airplanes

Novak 55T Brushed Motor w/Rooster Crawler Edition ESC Combo

(No reviews yet)

Lowest Parts Prices on the Internet!
Retail Price: $185.00
Our Price:
 $109.99
(You save $75.01 )
Product Code:
NVK1842
UPC:
607209018425
Availability:
DISCONTINUED
Google_Availability:
Out of stock
Google_Product_Category:
2778
Google_Size:
FALSE
Google_Age_Group:
displayad
Google_Material:
NOIMG
Novak 55T Brushed Motor w/Rooster Crawler Edition ESC Combo

Out of stock

As the crawling segment continues to grow, Novak has continually expanded its line of crawling brushed motors.

"FIFTY-FIVE" CRAWLER BRUSHED MOTORS
Novak's Fifty-Five Crawler Brushed Motor - 55T, provides precise movement control, and exceptional torque and long-run times due to the motor's high-turn count. This motor is completely rebuildable with an easily accessible commutator and replaceable brushes and springs. The brushed motor is also outfitted with dual-ball bearings for a smooth and efficient ride, and high strength magnets for unmatched brush-motor performance. On top of that, Novak pre-installed three motor capacitors to simplify the installation process, so users can be crawling in no time.

ROOSTER CRAWLER ESC
One of Novak’s most popular brushed ESCs, the Rooster, is now available in a Crawler edition. Because crawler vehicles require such precise movement control at low speeds, it only makes sense to use equipment specifically designed for this purpose. Novak is one of the few, if not the only R/C manufacturer, who offers a speed control specifically designed for crawlers. So if crawling is what you like to do, you’ll want to take a good look at Novak’s Rooster Crawler-Edition.

Besides a different case label, the Rooster Crawler looks the same as the Rooster 12T. Same small footprint, same heat sink assembly, and same 14-gauge power wires on PCB-direct solder tabs for easy soldering. Inside the orange case, however, is where crawler-specific software transforms the Rooster into a Crawler. The special software enables crawler applications to scale, navigate, and conquer the most challenging terrain.

The Rooster Crawler is equipped with an improved 6 volt/ 5 amp BEC that’s perfect for super high-torque servos in crawling conditions. Its Zero Reverse Delay allows instant power delivery in both forward and reverse when needed. High-power Drag Brakes provide monster holding power that’s especially useful when embarking on a downhill descent. And yes, the Rooster Crawler edition includes the newest must-have feature: built-in Li-Po cut-off protection. This feature monitors the vehicle’s Lithium Polymer battery pack’s voltage, and prevents the batteries from going below the critical safety voltage level. The driver is cued via throttle blips when the voltage drops to a certain level. After 20 blips it then shuts off, however, full control of the steering servo is left intact. The Li-Po cut-off protection feature can be enabled or disabled via the ESC’s two throttle profiles.

Other Rooster Crawler features include a water-resistant case, a user-replaceable input harness, and auxiliary fan connectors. Of course, all the standard features for which Novak is known are also included: One-Touch Set-Up™, Radio-Priority Circuitry™, Polar Drive Circuitry™, and Thermal Overload Protection.

The Rooster Crawler is compatible with single and dual brushed motor crawler applications such as a single Mabuchi 27-turn motor or dual 35 to 55-turn lathe motors.


CRAWLER BRUSHED MOTOR FEATURES

  • Specifically designed for R/C vehicles that require precise movement control
  • High number of turns for excellent torque and long-run times
  • Dual-ball bearing for smoothness and efficiency
  • High-strength magnet for unmatched brush motor performance
  • 100 percent rebuildable with user-replaceable brushes and springs
  • Easily accessible commutator for easy maintenance
  • Direct-Solder Wiring Tabs for flexible soldering options
  • Novak factory-installed motor capacitors to reduce glitching
  • Tested by Novak in Irvine, Calif.

CRAWLER BRUSHED MOTOR SPECIFICATIONS
  • Number of Turns: 45 (#3545); 55 (#3555)
  • Design: Stand-up Brushed
  • Input Voltage: 4-7 cells (1.2V/cell) or 2S Li-Poly cells
  • Motor Size: 2.07" x 1.42" (52.7 x 36.1 mm)
  • Shaft Diameter: 0.125" (3.2 mm) [accepts all existing pinion gears]
  • Bearing: Standard 3/8" x 1/8"
  • Motor Weight: 5.97 oz., 169 grams (#3545); 6.03 oz., 171 grams (#3555)
  • Magnet: High-Strengh Ferrite


ROOSTER CRAWLER-EDITION FEATURES
  • 2 specifically designed crawling driving profiles which feature Zero Reverse Delay, and high-powered Drag Brakes (or “Hill” or “Hold” brakes)
  • Built-in Li-Poly Cutoff Protection (Profile 2)
  • Water-Resistant Case
  • Heavy-Duty 6 Volt / 5 Amp BEC
  • Direct-Solder Wiring Tabs
  • User Replaceable Input Harness
  • Novak’s One-Touch Set-Up™
  • Built-in Power Output for Optional 6V Accessory Fan (#5648)
  • Novak’s Radio-Priority Circuitry™
  • Novak’s Polar Drive Circuitry™
  • Thermal Overload Protection

ROOSTER CRAWLER-EDITION SPECIFICATIONS
  • Forward/Reverse: Forward and Reverse
  • Input Voltage: 4-7 Ni-Cd/Ni-MH cells (1.2V/cell) or 2 Li-Poly cells
  • Footprint: 1.54" x 1.18" (39 x 30 mm)
  • Weight: 2.66 oz. (75.5 g) w/wires; 1.57 oz. (44.5 g) w/o wires
  • On-Resistance: 0.0014 ohms (forward); 0.0028 ohms (reverse)*
  • Rated Current: 400 amps* (forward)
  • Braking Current: 200 amps*
  • BEC: 6.0 volt/5.0 amp
  • Motor Limit 27-turn brushed (at 6 cells Ni-MH)
  • Discrete Steps: 256 Forward; 256 Reverse
  • Battery Plug: Tamiya
  • Drive Profiles: 2
  • Status LEDs: 2
  • Voltage Cut-off: 6.25 volts (Li-Poly Profiles)