HOT RACING

Hot Racing Rear Axle Aluminum Case for Axial SCX24

This is an optional Hot Racing Rear Axle Aluminum Case for the Axial SCX-24. CNC machined billet aluminum axle housing and tubes, anodized black CNC machined billet aluminum Worm Gear cover,...

HOT RACING

Hot Racing Rear Trim Cover Splash Guard for the Traxxas Spartan Boat

This is the Hot Racing Rear Trim Cover Splash Guard for the Traxxas Spartan boat. Features black anodized aluminum construction. Includes (1) splash guard and (4) stainless steel mounting screws and...

HOT RACING

Hot Racing Red Aluminum Oversized Bearing Knuckle for Arrma 1/10 2WD, ARM21X02

These are the Hot Racing Red Aluminum Oversized Bearing Knuckles for Arrma 1/10 2WD vehicles, including the Raider, ADX-10, Vortex, Granite, Fury and Mojave. CNC machined billet 6061-T6 aluminum...

HOT RACING

Hot Racing Steel HD CV Drive Shafts Axles with Aluminum Hex for Traxxas X-Maxx

These are the Hot Racing Steel HD CV Drive Shafts Axles with 24mm Aluminum Hex for the Traxxas 6S and 8S X-Maxx. CNC machined hardened steel construction, with tough and corrosion resistance black...

HOT RACING

Hot Racing Steel Spur Gear 54T 1 Mod for Traxxas E-Revo 2/X-Maxx/XO-1

This is the Hot Racing 54 tooth hardened steel Mod1 (1.0 metric pitch) spur gear for the Traxxas E-Revo 2, X-Maxx, Maxx 4S, and XO-1 vehicles.SPECIAL NOTE: DO NOT use the pin system for setting the...

HOT RACING

Hot Racing Steel Spur Gear 57 Tooth/0.8 Mod for Arrma 1/10 4x4 BLX

This is the Hot Racing Steel Super Duty 0.8 Mod (32 pitch), 57 Tooth Spur Gear for 1/10 Arrma 4X4 3S BLX brushless vehicles. See comments below for specific vehicle fit information. FEATURES: Rugged...

HOT RACING

Hot Racing Steel Stub Axles with Aluminum 24mm Wheel Hex for Traxxas X-Maxx

These are the Hot Racing Steel Stub Axles with Aluminum 24mm Wheel Hex for Traxxas X-Maxx. Includes (4) steel stub axles, (4) threaded 24mm wheel hexes, (4) 4x21mm drive pins, (4) M5x5mm setscrews...

HOT RACING

Hot Racing Aluminum Motor Mount for Traxxas X-Maxx

This is the Hot Racing Aluminum Motor Mount for the Traxxas X-Maxx. CNC machined 6061 aluminum, with Heat sink Fin Blue anodized for durability and laser etched logos Two piece design with...

HOT RACING

Hot Racing Aluminum +10mm 17mm Splined Hubs for Traxxas Maxx 4S

These are Hot Racing Aluminum +10mm 17mm Splined Hubs for the Traxxas Maxx 4S 1/10 Monster Truck. Hot Racing +10mm/side extended 17mm hex hub wheel adapters for the Traxxas 1/10 Maxx. These increase...

HOT RACING

Hot Racing Aluminum Custom Front Grille for TRX-4 Defender

This is the Hot Racing Black Anodized Aluminum Custom Front Grille for Traxxas TRX-4 Defender. CNC machined billet aluminum bumper, anodized semi-flat black All machined LED mounts fit Traxxas...

HOT RACING

Hot Racing Aluminum Front Bumper for TRX-4

This is the Hot Racing Aluminum Front Bumper with Skid Plate & Winch Mount for the Traxxas TRX-4. Beefy machined billet aluminum bumper, anodized semi-flat black Removable aluminum skid plate,...

HOT RACING

Hot Racing Aluminum Rear Axle Case for Tamiya 1/14 Semi Truck Vehicles, TTF12R01

This is the optional Aluminum Rear Axle Case for Tamiya 1/14 Semi Truck Vehicles.   FEATURES: CNC machined aluminum construction Replaces factory plastic axle case housing with two output...

HOT RACING

Hot Racing Aluminum Spindle Carrier Caster Block Set for Losi 5ive-T & Mini WRC

This is the Hot Racing Aluminum Spindle Carrier (Caster Block) Set for Losi 5ive-T and Mini WRC 4WD Rally Car. CNC machined 6061-T6 aluminum construction Black anodizing for durability, corrosion...

HOT RACING

Hot Racing Brass Steering Knuckles Portal Gear Cover for TRX-4

This is the Hot Racing Brass Steering Knuckles Portal Gear Cover Set for the Traxxas TRX-4. The Hot Racing super heavy brass TRX-4 steering knuckles portal gear cover (steering blocks) for the...

HOT RACING

Hot Racing Hard Aluminum Differential Case for TRX-4, TRXF11H

This is the Hot Racing Hard Aluminum Differential Case for the Traxxas TRX-4. This differential case features a 6061-t6 aluminum body with hard anodizing. This combination of light weight aluminum...

HOT RACING

Hot Racing Metal Servo Gear for Traxxas X-Maxx

This is the Hot Racing Metal Servo Gear for the Traxxas X-Maxx. This inner gear set works on the Traxxas steering servo 2085. (1) top reduction gear (1) center reduction gear (1) bottom reduction...

HOT RACING

Hot Racing Red Aluminum Caster Blocks with King Pins for Arrma 1/10 2WD, ARM1902

These are the Hot Racing Red Aluminum Caster Blocks with King Pins for Arrma 1/10 2WD vehicles. For the 1/10th scale 2WD electric Arrma vehicles, including the Raider, ADX-10, Vortex, Granite, Fury...

HOT RACING

Hot Racing 2-Speed Gear Box with Steel Gear Long Shaft Output for Axial Wraith, AX10, and SCX10

Hot Racing 2-speed heavy duty complete full metal gear locked center main gearbox transmission with heavy duty 32 pitch, 57 tooth spur gear for the Axial Wraith, AX10, and SCX-10 (SCX38TP03 may have...

HOT RACING

Hot Racing Aluminum 24mm Hex Hub Wheels Lock Set for Traxxas X-Maxx

This is the Hot Racing Aluminum 24mm Hex Hub Wheels Lock Set for the Traxxas X-Maxx. This set features an optional wheel support ring for specific use with the Traxxas X-Maxx 24 hex hub stock wheels...

HOT RACING

Hot Racing Aluminum Heat Sink Motor Plate for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Heat Sink Motor Plate for the Traxxas E-Revo 2.0. Replaces Traxxas 8690 motor plate. CNC machined 6061-T6 aluminum Motor plate anodized black with red heat sink...

HOT RACING

Hot Racing Aluminum Transmission Case for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Transmission Case for the Traxxas Revo 2.0. This replaces part of Traxxas 8691. CNC machined 6061 billet aluminum transmission case Black anodized color Reuses stock...