Hot Racing Traxxas E-Revo Parts

HOT RACING

Hot Racing Steel Front or Rear Differential Locker Spool for Traxxas E-Revo 2.0

This is the Hot Racing Steel Front or Rear Differential Locker Spool for the Traxxas Revo 2.0. This is located in the differential case, and can be used front or rear to eliminate the differential action. This part is recommended for off-road use only...

HOT RACING

Hot Racing Black Aluminum Rear Body Mount for Traxxas E-Revo 2.0

This is the Hot Racing Black Aluminum Rear Body Mount for the Traxxas Revo 2.0. Replace the stock plastic body posts on your Traxxas E-Revo 2.0 with this good looking aluminum rear body mount from Hot Racing. CNC aluminum construction, anodized black in...

HOT RACING

Hot Racing Steel Spur Gear 46T 1 Mod for Traxxas E-Revo 2/X-Maxx/XO-1

This is the Hot Racing 46 tooth hardened steel Mod1 (1.0 metric pitch) spur gear for the Traxxas E-Revo 2, X-Maxx and XO-1 vehicles. SPECIAL NOTE: DO NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without...

HOT RACING

Hot Racing Aluminum Differential Carrier Case for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Differential Carrier Case for the Traxxas Revo 2.0. Replaces the Traxxas 8681 differential carrier. CNC machined aluminum Anodized blue Fits either the front or rear differential INCLUDES: One (1) differential...

HOT RACING

Hot Racing Steel and Aluminum HD CVD Splined Axles for Traxxas E-Revo 2.0

These are the Hot Racing Steel and Aluminum HD CVD Splined Axles for the Traxxas Revo 2.0. Replaces Traxxas #8652 outdrive cups, #8650 driveshaft, and #8563 stub axle. CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub...

HOT RACING

Hot Racing Aluminum Rear Skid Plate for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Rear Skid Plate for the Traxxas Revo 2.0. Solid Billet aluminum construction incorporating CNC machined 6061-T6 aluminum construction Anodized black and secondary processed machined edges for outstanding...

HOT RACING

Hot Racing CNC 3D Aluminum Center Skid Plate for Traxxas E-Revo 2.0

This is the Hot Racing CNC 3D Aluminum Center Skid Plate for the Traxxas E-Revo 2.0. CNC machined billet aluminum Center Skid Plate Anodized Black Replaces factory plastic skid plate INCLUDES: One (1) billet aluminum center skid plate REQUIREMENTS: ...

HOT RACING

Hot Racing Black Aluminum Front Body Mount for Traxxas E-Revo 2.0

This is the Hot Racing Black Aluminum Front Body Mount for the Traxxas Revo 2.0. Replace the stock plastic body posts on your Traxxas E-Revo 2.0 with this good looking aluminum front body mount from Hot Racing. CNC aluminum construction, anodized black...

HOT RACING

Hot Racing Aluminum Front Skid Plate for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Front Skid Plate for the Traxxas Revo 2.0. Solid Billet aluminum construction incorporating CNC machined 6061-T6 aluminum construction Anodized black with Hot Racing logo and secondary processed machined edges for...

HOT RACING

Hot Racing Ball Type Aluminum Shock Ends for Traxxas E-Revo Series

These are Hot Racing Hop-Up Aluminum Shock Ends for the Traxxas Revo Series. CNC machined billet aluminum construction Replaces stock plastic links for extreme durability Anodized black for durability, corrosion resistance, and...

HOT RACING

Hot Racing Heavy Duty Splined Star Drive CVD Axle Kit for Traxxas Nitro and Original E-Revo

This is the Hot Racing Heavy Duty Splined Star Drive CVD Axle Kit for the Traxxas trucks using the original Traxxas 5451X driveshafts. These shafts are only compatible with vehicles that use the Traxxas 5451X axle shafts. Please confirm that your vehicle...

HOT RACING

Hot Racing Blue Aluminum Steering Assembly for Traxxas Revos

This is the Hot Racing Blue Aluminum Servo Saver Steering Assembly for the Traxxas E-Revo, E-Revo 2.0, Revo, Slayer Pro 4X4, and Summit. CNC machined aluminum construction, anodized blue Includes heavy duty spring All assembly ready to install (as in the...

HOT RACING

Hot Racing Suspension Pin Mount for Traxxas E-Revo 2.0

This is the Hot Racing Suspension Pin Mount for the Traxxas E-Revo/E-Revo 2.0. Replaces Traxxas 8690 motor plate. CNC machining of 6061-T6 Black anodized aluminum INCLUDES: One (1) Suspension Pin Mount REQUIREMENTS: Installation This will replace...

HOT RACING

Hot Racing Steel Spur Gear 50T 1 Mod for Traxxas E-Revo 2/X-Maxx/XO-1

This is the Hot Racing 50 tooth hardened steel Mod1 (1.0 metric pitch) spur gear for the Traxxas E-Revo 2, X-Maxx (6S or 8S), Maxx 4s, XO-1, and XRT vehicles.SPECIAL NOTE: DO NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set...

HOT RACING

Hot Racing Aluminum Heat Sink Motor Mount Plate for Traxxas E-Revo/Summit

This is the Hot Racing Aluminum Heat Sink Motor Mount Plate for the Traxxas E-Revo and Summit. Replaces Traxxas 5660 motor mount plate and the 5661 motor mount hinge post. CNC machined 6061-T6 aluminum, anodized black Large fins dissipates heat for a...

HOT RACING

Hot Racing Aluminum Front Body Mount for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Front Body Mount (black) for the Traxxas Revo 2.0. Works on the 1/10th scale Traxxas E-Revo, E-Revo 2 Revo 3.3, Slayer Pro 4X4, and Summit. CNC Machined 6061 aluminum construction Anodized black in color INCLUDES: One...

HOT RACING

Hot Racing Aluminum Transmission Spur Gear Cover for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Transmission Spur Gear Cover for the Traxxas Revo 2.0. Replaces Traxxas part #8677. Works on the 1/10th scale Traxxas E-Revo 2.0. CNC machined aluminum construction Anodized black in color INCLUDES: One (1)...

HOT RACING

Hot Racing Aluminum Double-Shear Steering Servo Horn Arm for Traxxas Revo/Summit

This is the Hot Racing Aluminum Double-Shear Steering Servo Horn Arm for the original Traxxas E-Revo (NOT 2.0), Revo 3.3, Slayer Pro 4X4 (only one of the two horns is used), Summit, T-Maxx 3.3, and XO-1 w/TSM (only one of the two horns is used). Replaces...

HOT RACING

Hot Racing Aluminum Rear Body Mount for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Rear Body Mount (black) for the Traxxas Revo 2.0. Replaces the plastic rear body mount from Traxxas parts kit 5314. Works on the 1/10th scale Traxxas E-Revo, E-Revo 2 Revo 3.3, Slayer Pro 4X4, and Summit. CNC Machined...

HOT RACING

Hot Racing Steel Spur Gear 54T 1 Mod for Traxxas E-Revo 2/X-Maxx/XO-1

This is the Hot Racing 54 tooth hardened steel Mod1 (1.0 metric pitch) spur gear for the Traxxas E-Revo 2, X-Maxx, Maxx 4S, and XO-1 vehicles.SPECIAL NOTE: DO NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh...

HOT RACING

Hot Racing Aluminum Heat Sink Motor Plate for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Heat Sink Motor Plate for the Traxxas E-Revo 2.0. Replaces Traxxas 8690 motor plate. CNC machined 6061-T6 aluminum Motor plate anodized black with red heat sink fins Aids in cooling motors INCLUDES: One (1) motor mount...

HOT RACING

Hot Racing Aluminum Transmission Case for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Transmission Case for the Traxxas Revo 2.0. This replaces part of Traxxas 8691. CNC machined 6061 billet aluminum transmission case Black anodized color Reuses stock gears and transmission internals INCLUDES: One...