HOT RACING

Hot Racing Aluminum Differential Carrier Case for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Differential Carrier Case for the Traxxas Revo 2.0. Replaces the Traxxas 8681 differential carrier. CNC machined aluminum Anodized blue Fits either the front or rear...

HOT RACING

Hot Racing Aluminum Rear Skid Plate for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Rear Skid Plate for the Traxxas Revo 2.0. Solid Billet aluminum construction incorporating CNC machined 6061-T6 aluminum construction Anodized black and secondary...

HOT RACING

Hot Racing Black Aluminum Front Body Mount for Traxxas E-Revo 2.0

This is the Hot Racing Black Aluminum Front Body Mount for the Traxxas Revo 2.0. Replace the stock plastic body posts on your Traxxas E-Revo 2.0 with this good looking aluminum front body mount from...

HOT RACING

Hot Racing Black Aluminum Rear Body Mount for Traxxas E-Revo 2.0

This is the Hot Racing Black Aluminum Rear Body Mount for the Traxxas Revo 2.0. Replace the stock plastic body posts on your Traxxas E-Revo 2.0 with this good looking aluminum rear body mount from...

HOT RACING

Hot Racing CNC 3D Aluminum Center Skid Plate for Traxxas E-Revo 2.0

This is the Hot Racing CNC 3D Aluminum Center Skid Plate for the Traxxas E-Revo 2.0. CNC machined billet aluminum Center Skid Plate Anodized Black Replaces factory plastic skid plate INCLUDES: One...

HOT RACING

Hot Racing Steel and Aluminum HD CVD Splined Axles for Traxxas E-Revo 2.0

These are the Hot Racing Steel and Aluminum HD CVD Splined Axles for the Traxxas Revo 2.0. Replaces Traxxas #8652 outdrive cups, #8650 driveshaft, and #8563 stub axle. CNC machined #45 hardened...

HOT RACING

Hot Racing Steel Front or Rear Differential Locker Spool for Traxxas E-Revo 2.0

This is the Hot Racing Steel Front or Rear Differential Locker Spool for the Traxxas Revo 2.0. This is located in the differential case, and can be used front or rear to eliminate the differential...

HOT RACING

Hot Racing Steel Spur Gear 46T 1 Mod for Traxxas E-Revo 2/X-Maxx/XO-1

This is the Hot Racing 46 tooth hardened steel Mod1 (1.0 metric pitch) spur gear for the Traxxas E-Revo 2, X-Maxx and XO-1 vehicles. SPECIAL NOTE: DO NOT use the pin system for setting the X-Maxx...

HOT RACING

Hot Racing 65mm Hard Anodized Drive Tube for Hot Racing Maxx 4S Driveshafts and WideMaxx, SLD65T

This is a Hot Racing 65mm Hard Anodized Drive Tube used to extend the Hot Racing MXX288RC06 heavy-duty driveshafts for the Traxxas Maxx 4S 1/10 Monster Truck using a WideMaxx setup. Includes (1) 65mm...

HOT RACING

Hot Racing Adjustable Steering Turnbuckle Toe Links for Unlimited Desert Racer

These are the Hot Racing Adjustable Steering Turnbuckle Toe Links for use on the 1/7th Traxxas Unlimited Desert Racer. CNC machined billet aluminum construction Anodized vibrant blue for durability,...

HOT RACING

Hot Racing Aluminum Adjustable Bellcranks with Servo Saver for the Unlimited Desert Racer

This is the Hot Racing Aluminum Adjustable Bellcranks with Servo Saver Set for the Traxxas Unlimited Desert Racer. Super-tough, fully adjustable servo saver bell crank Replaces factory plastic for a...

HOT RACING

Hot Racing Aluminum Brake Disc Drive Hub for the Unlimited Desert Racer

This is the Hot Racing Aluminum Brake Disc Drive Hub for the Traxxas Unlimited Desert Racer. CNC Aluminum brake disc Hex Star Drive Hub Gives the center of your wheel the cool look of a high...

HOT RACING

Hot Racing Aluminum Custom Front Grille for TRX-4 Defender

This is the Hot Racing Black Anodized Aluminum Custom Front Grille for Traxxas TRX-4 Defender. CNC machined billet aluminum bumper, anodized semi-flat black All machined LED mounts fit Traxxas...

HOT RACING

Hot Racing Aluminum Front Bumper for TRX-4

This is the Hot Racing Aluminum Front Bumper with Skid Plate & Winch Mount for the Traxxas TRX-4. Beefy machined billet aluminum bumper, anodized semi-flat black Removable aluminum skid plate,...

HOT RACING

Hot Racing Aluminum Front Bumper Mount Frame Plate for TRX-4

This is the Hot Racing Aluminum Front Bumper Mount Frame Plate for the Traxxas TRX-4. One-piece CNC machined 6061 aluminum construction Black anodized finish Secondary-processed machined chamfered...

HOT RACING

Hot Racing Aluminum HD Steering Blocks for the Unlimited Desert Racer

These are the Hot Racing Aluminum Heavy Duty Steering Blocks (Axle Carriers) for the Traxxas Unlimited Desert Racer. CNC machined aluminum, anodized black Heavy duty rubber sealed oversized bearings...

HOT RACING

Hot Racing Aluminum Rear Axle Portal Mount for TRX-4

This is the Hot Racing Black Anodized Aluminum Rear Axle Portal Mount for the Traxxas TRX-4. CNC machined 6061-T6 aluminum Anodized black with laser engraved lettering Includes (1) aluminum left Rear...

HOT RACING

Hot Racing Aluminum Rear Bumper for TRX-4, TRXF03WRA01

This is the Hot Racing Black Anodized Aluminum Rear Bumper for the Traxxas TRX-4 or Axial SCX10 II. CNC machined billet aluminum bumper, anodized semi-flat black Solid aluminum stinger Two machined...

HOT RACING

Hot Racing Aluminum Rear Bumper Mount Frame Plate for TRX-4

This is the Hot Racing Aluminum Rear Bumper Mount Frame Plate for the Traxxas TRX-4. One-piece CNC machined 6061 aluminum construction Black anodized finish Secondary-processed machined chamfered...

HOT RACING

Hot Racing Aluminum Rear Hub Carrier Uprights for Losi 5ive-T & Mini WRC

These are the Hot Racing Aluminum Rear Hub Carrier Uprights for Losi 5ive-T and Mini WRC 4WD Rally Car. CNC machined 6061-T6 aluminum construction Black anodizing for durability, corrosion...

HOT RACING

Hot Racing Aluminum Spindle Carrier Caster Block Set for Losi 5ive-T & Mini WRC

This is the Hot Racing Aluminum Spindle Carrier (Caster Block) Set for Losi 5ive-T and Mini WRC 4WD Rally Car. CNC machined 6061-T6 aluminum construction Black anodizing for durability, corrosion...

HOT RACING

Hot Racing Aluminum Steering Rack Center Brace for the Unlimited Desert Racer

This is the Hot Racing Aluminum Steering Rack Center Brace for the Traxxas Unlimited Desert Racer. CNC Strong, light, and tough 6061 Aluminum construction Direct replacement for TUDR4801 or part of...

HOT RACING

Hot Racing Aluminum Transmission Case for Slash/Stampede/Rustler 2WD

This is a Hot Racing Aluminum Transmission Case for the Traxxas Slash, Stampede, Rustler, and Bandit 2WD models. CNC machined 6061 billet aluminum transmission case CNC machined 6061 aluminum motor...

HOT RACING

Hot Racing Black Aluminum Front Lower Suspension Arms for Unlimited Desert Racer

These are the Hot Racing Black Aluminum Front Lower Suspension Arms for use on the 1/7th Traxxas Unlimited Desert Racer. CNC machined 6061-T6 aluminum construction Patent pending suspension arm ball...

HOT RACING

Hot Racing Brass Steering Knuckles Portal Gear Cover for TRX-4

This is the Hot Racing Brass Steering Knuckles Portal Gear Cover Set for the Traxxas TRX-4. The Hot Racing super heavy brass TRX-4 steering knuckles portal gear cover (steering blocks) for the...

HOT RACING

Hot Racing CV Splined Axle Drive Shafts for 1/16 Traxxas Revo VXL

These are the Hot Racing CV Splined Axle Drive Shafts for the 1/16 Traxxas Revo VXL. This is an optional upgrade heavy duty front splined star drive CVD axle kit for 1/16 Revo VXL. CNC machined #45...

HOT RACING

Hot Racing Front Lightweight Metal CV Splined Axles for Slash/Stampede/Rustler 4X4

These are the Hot Racing Front Lightweight Metal CV Splined Axles for the Traxxas Slash/Stampede/Rustler 4X4. CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum...

HOT RACING

Hot Racing Heavy Metal Brass Knuckle Portal Cover for TRX-4

This is the Hot Racing Heavy Metal Brass Knuckle Portal Cover for the Traxxas TRX-4. CNC machined solid brass Heavy to add weight to vehicle for greater stability. Improves weight...

HOT RACING

Hot Racing Metal CV Splined Drive Shaft for Traxxas Maxx 4S

This is the Hot Racing heavy-duty splined star drive CVD axle kit for the front or rear of the Traxxas Maxx 4S 1/10 Monster Truck. Includes (2) splined axle assemblies. CNC machined #45 hardened...

HOT RACING

Hot Racing Modular Brass Steering Knuckles Portal Gear Cover for TRX-4

This is the Hot Racing Modular Brass Steering Knuckles Portal Gear Cover for the Traxxas TRX-4. Hot Racing heavy brass modular outer portal drive housings for the front of the Traxxas TRX-4 crawler...

HOT RACING

Hot Racing Motor Heat Sink Bearing End Cap with Blower Fan for Unlimited Desert Racer

This is the Hot Racing Motor Heat Sink Plus Blower Fan for use on stock size 2200KV motor on the 1/7th Traxxas Unlimited Desert Racer. Forced airflow over motor Bearing Cap heat sink to increase...

HOT RACING

Hot Racing Steel Front CV Splined Axles Drive Shaft for the Unlimited Desert Racer

This is the Hot Racing Steel Front CV Splined Axles Drive Shaft for the Traxxas Unlimited Desert Racer. Completely replaces factory dogbone-style axles from the differential all the way out to the...

HOT RACING

Hot Racing Steel Spur Gear 45-Tooth, 32-Pitch for TRX-4

This is the Hot Racing Steel Spur Gear 45-Tooth, 32-Pitch for the Traxxas TRX-4. Replaces Traxxas TRA8053. Rugged 32 pitch (0.8 module) teeth for total reliability when using high power brushless...

HOT RACING

Hot Racing Super Duty Slipper System for Traxxas 2WD (Small)

This is Hot Racing's optional super duty slipper system with pressure plate, slipper hub, and metallic friction pad for the 1/10 Traxxas Bandit, Jato 3.3, Rally, Rustler, Slash 2WD, Slash 4X4,...

HOT RACING

Hot Racing Titanium Steering and Suspension Link Set 324mm Wheelbase for TRX-4

This is the Hot Racing full 10-piece titanium steering and suspension link set for 324mm wheelbase Traxxas TRX-4 vehicles, including the stock TRX-4 Defender and TRX-4 Tactical, or custom crawlers...

HOT RACING

Hot Racing 1/10 Dual Motor Power Winch

Hot Racing dual motor, high torque winch for superior scale looks and power. High torque dual motor and gearbox reduction design Full CNC machined billet aluminum case, anodized black CNC machined...

HOT RACING

Hot Racing 25mm or 30mm Sliding Motor Mount for Traxxas X-Maxx/XRT 8S

This is the Hot Racing 25mm or 30mm Sliding Motor Mount for the Traxxas X-Maxx 6S/8S and the XRT 8S. This kit includes machined sliding adjustable motor mounts that are simply amazing.   CNC...

HOT RACING

Hot Racing Aluminum Bearing Saver Steering Kit for E-Maxx/T-Maxx

This is the Hot Racing Aluminum Bearing Saver Steering Kit for the Traxxas E-Maxx and T-Maxx. Super-tough, fully adjustable servo saver Stronger than standard stock steering kit CNC machined aluminum...

HOT RACING

Hot Racing Aluminum Fixed Link Steering with 25-T Servo Arm for Unlimited Desert Racer

This is the Hot Racing Aluminum Fixed Link Steering with 25-T Servo Arm for use on the 1/7th Traxxas Unlimited Desert Racer. FEATURES: CNC machined 6061 aluminum for stronger, more precise...

HOT RACING

Hot Racing Aluminum Front Skid Plate for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Front Skid Plate for the Traxxas Revo 2.0. Solid Billet aluminum construction incorporating CNC machined 6061-T6 aluminum construction Anodized black with Hot Racing...

HOT RACING

Hot Racing Ball Type Aluminum Shock Ends for Traxxas E-Revo Series

These are Hot Racing Hop-Up Aluminum Shock Ends for the Traxxas Revo Series. CNC machined billet aluminum construction Replaces stock plastic links for extreme durability Anodized black for...

HOT RACING

Hot Racing Hard Aluminum Differential Case for TRX-4, TRXF11H

This is the Hot Racing Hard Aluminum Differential Case for the Traxxas TRX-4. This differential case features a 6061-t6 aluminum body with hard anodizing. This combination of light weight aluminum...

HOT RACING

Hot Racing S2 Spring Steel Solid Front Axle with Gear for TRX-4, STRXF12SFG

This is the Hot Racing S2 Spring Steel Solid Front Axle with Gear for the Traxxas TRX-4. CNC Hardened S2 steel construction Axle- CNC Cut # 45 Hardened Steel gear Replaces worn or damaged axle shafts...

HOT RACING

Hot Racing Steel Spur Gear 39-Tooth, 32-Pitch for TRX-4

This is the Hot Racing Steel Spur Gear 39-Tooth, 32-Pitch for the Traxxas TRX-4. Replaces Traxxas TRA8053. Rugged 32 pitch (0.8 module) teeth for total reliability when using high power brushless...

HOT RACING

Hot Racing Tall Battery Hold-Downs for Traxxas Maxx 4S

These are Hot Racing Tall Battery Hold-Downs for the Traxxas Maxx 4S 1/10 Monster Truck. CNC machined 6061-T6 aluminum Adjustable battery cell Straps Accommodates Tall packs COMMENTS: Replaces...

HOT RACING

Hot Racing 25-Tooth Aluminum Standard Steering Servo Arm for Traxxas Maxx 4S

This is the 25-Tooth Aluminum Standard Steering Servo Arm for the Traxxas Maxx 4S 1/10 Monster Truck. CNC machined 6061 aluminum for stronger, more precise steering Clamping servo horn gives precise...

HOT RACING

Hot Racing 40mm Twister Motor Cooling Fan with Plug

This is the Hot Racing Twister Blower Ball bearing 7-blade 40x40x28mm large cooling fan for custom cooling needs or as a replacement for the Hot Racing AON404TP Monster Blower Fan cooling system...

HOT RACING

Hot Racing 40mm Twister Motor Cooling Fan with plug - 1/7, 1/8

This is the Hot Racing Twister Blower Clip-On Universal Heat Sink and Fan for the 1/8, 1/7 Arrma Felony, Infraction Limitless, Mojave, Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX,...

HOT RACING

Hot Racing 50mm Monster Blower Motor Cooling Fan for Traxxas X-Maxx 8S

This is the Hot Racing 50mm Monster Blower Motor Cooling Fan for the Traxxas X-Maxx 8S. This kit includes everything needed to add a forced-air motor cooling fan to the Traxxas X-Maxx 8S. Forced...

HOT RACING

Hot Racing Aluminum Bleeder Shock Caps Cartridge for Arrma 1/5 Shocks

These are Hot Racing optional aluminum shock cap for the Arrma 1/5 Shock bleeder caps. CNC machined aluminum construction, anodized black Secondarily processed machined beveled edges Bleeder screws...

HOT RACING

Hot Racing Aluminum Caster Blocks (C-Hubs) for Traxxas Maxx 4S

These are Hot Racing Aluminum Caster Blocks (C-Hubs) for the Traxxas Maxx 4S 1/10 Monster Truck. CNC machined 6061-T6 aluminum, anodized black Stainless Steel kingpin for smooth steering Laser etched...

HOT RACING

Hot Racing Aluminum Chassis Brace for 6S/8S Battery Setup on Specified Arrma, AON126X01

This is the Hot Racing Aluminum Chassis Brace for 6S/8S Battery Setups on specified Arrma vehicles. The Hot Racing aluminum battery tray set with receiver box mount enables your Arrma to be setup...

HOT RACING

Hot Racing Aluminum Cooling Hose Ferrule Cover for Traxxas Spartan and M41 Boats

This is the Hot Racing Aluminum Cooling Hose Ferrule Cover for the Traxxas Spartan and M41 Catamaran boats. Features CNC aluminum construction and anodized Blue color. CNC machined billet aluminum...

HOT RACING

Hot Racing Aluminum Diamond Rear Bumper for TRX-4, TRXF03ERP01

This is the Hot Racing Black Anodized Aluminum Diamond Rear Bumper for the Traxxas TRX-4 or Axial SCX10 II. CNC machined billet aluminum bumper, anodized semi-flat black Solid aluminum stinger Two...

HOT RACING

Hot Racing Aluminum Front Body Mount for Traxxas E-Revo 2.0

This is the Hot Racing Aluminum Front Body Mount (black) for the Traxxas Revo 2.0. Works on the 1/10th scale Traxxas E-Revo, E-Revo 2 Revo 3.3, Slayer Pro 4X4, and Summit. CNC Machined 6061 aluminum...

HOT RACING

Hot Racing Aluminum Heat Sink Motor Mount Plate for Traxxas E-Revo/Summit

This is the Hot Racing Aluminum Heat Sink Motor Mount Plate for the Traxxas E-Revo and Summit. Replaces Traxxas 5660 motor mount plate and the 5661 motor mount hinge post. CNC machined 6061-T6...

HOT RACING

Hot Racing Aluminum Multi-Mount Rear Shock Tower for Unlimited Desert Racer

This is the Hot Racing Aluminum Multi-Mount Rear Shock Tower for use on the 1/7th Traxxas Unlimited Desert Racer. CNC machined 6061 aluminum rear shock tower More suspension tuning position Aluminum...

HOT RACING

Hot Racing Aluminum Rear Hubs (Stub Axle Carriers) for Traxxas Maxx 4S

These are Hot Racing Aluminum Rear Hubs (Stub Axle Carriers) for the Traxxas Maxx 4S 1/10 Monster Truck. CNC machined aluminum construction Anodized Black in color Replaces stock plastic Traxxas rear...

HOT RACING

Hot Racing Aluminum Shock Tower Hoops for TRX-4

These are the Hot Racing Aluminum Shock Tower Hoops for the Traxxas TRX-4. CNC machined 6061-T6 aluminum construction 9 shock mounting options for a possible 10mm increase in damper choice Replaces...

HOT RACING

Hot Racing Aluminum Slipper Spur Gear 54-T for Traxxas Slash 4X4/Jato 3.3

This is the Hot Racing Aluminum Slipper Spur Gear (54T 0.8M/32P) for the Traxxas Slash 4X4, Stampede 4X4, Rally 4X4, Jato 3.3, and T-Maxx 3.3.   INCLUDES: One (1) aluminum 54T, 0.8 mod spur...