Coupon Add Catergory

ROBINSON RACING

Robinson Racing 20T Extra Hard 5mm Brushless Motor Pinion Gear, 8720

This is the Robinson Racing 20T Extra Hard 5mm Bore (.8 module) Brushless Motor Pinion Gear. Robinson Racing extra-hard high carbon brushless motor pinion gears are built to work with our...

RPM

RPM Rear Bumper for Traxxas Slash 4X4 - Blue, 80125

The 4x4 version of the Slash is another awesome creation from the minds at Traxxas but with a little help from RPM, we’ve made it even better! Our new rear bumper is modeled after full-sized short...

RPM

RPM Black ESC Cage for Castle Mamba Monster 2, 73622

The RPM ESC Cage is designed to simplify ESC installation and maintenance of the E-Maxx, E-Revo and Summit, as well as adding versatility by allowing quick removal of the ESC. Our cage encases the...

RPM

RPM Rear Bearing Carriers for Traxxas Slash 4x4, 80732

Also fits the Stampede 4x4, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & LSII! Let’s face it: breaking parts sucks! When a part fails, the day is over. Not when your ride is...

CEN

CEN Racing Threaded Hinge Pin 3MX44 for Colossus XT, GS027

This is the CEN Racing Threaded Hinge Pin 3MX44 for the Colossus XT.

ALIGN

Align T-Rex 100S Main Shaft, H11007

This is the Align T-Rex 100S Main Shaft.

RPM

RPM Front Bulkhead for Most Traxxas 1/10 2WD Vehicles - Red, 73759

One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed...

RPM

RPM Rear Bumper Mount for Traxxas Slash 2WD - Blue, 80905

After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler,...

RPM

RPM Front Bearing Carriers for Traxxas Electric Rustler/Stampede/Bandit/Slash 2WD - Blue, 80375

When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM oversized bearing carriers are there to save you. These carriers allow the use of massive 5mm x...

ROBINSON RACING

Robinson Racing 19T Extra Hard 5mm Brushless Motor Pinion Gear, 8719

This is the Robinson Racing 19T Extra Hard 5mm Bore (.8 module) Brushless Motor Pinion Gear. Robinson Racing extra-hard high carbon brushless motor pinion gears are built to work with our...

ASSOCIATED

Associated Silicone Diff Fluid 10,000CST 2oz, 5455

This is the Associated Silicone Diff Fluid 10,000CST. Keep your fluid-filled diffs ready for the toughest challenges with Associated brand differential fluids. Includes one 2-ounce bottle.

RPM

RPM Rear Upper & Lower A-Arms for Traxxas 1/16th E-Revo - Red, 80609

Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in...

EXTREME-FLYERS

Extreme-Flyers X350 Tail Boom, 5P31004

This is the Extreme-Flyers X350 Tail Boom.

DHK

DHK Complete Center Differential Gear Box for Optimus and Zombie Electric Models, 8381-200

This is the DHK Complete Center Differential Gear Box for Optimus and Zombie Electric Models (8381-200).

ATOMIK

Atomik M2.5 x 6mm SH Screw (6 pcs), 10009

These are the replacement Venom/Atomik M2.5 x 6mm Socket Head Screws (6 pcs) for the Venom Creeper R/C Rock Crawler. NOTE: This set replaces the original Venom part number 8320. Complete your...

HOT RACING

Hot Racing Aluminum Front Bumper Mount Frame Plate for TRX-4

This is the Hot Racing Aluminum Front Bumper Mount Frame Plate for the Traxxas TRX-4. One-piece CNC machined 6061 aluminum construction Black anodized finish Secondary-processed machined chamfered...

RPM

RPM Front or Rear A-Arms for Traxxas Slash 4X4 - Blue, 80705

Since the release of the Traxxas Slash 4x4, RPM customers flooded our e-mail in-box and called us to let us know how badly they wanted RPM A-arms for these trucks. They’re here! RPM A-arms for the...

RPM

RPM Wide Front Bumper for Traxxas Rustler/Stampede/Bandit/Nitro Sport - Pink, 81167

Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro Sport or Bandit added protection with the RPM Wide Front Bumper. This bumper stands six inches wide and adds an extra 1-1/2" worth of...

CEN

CEN Racing M3x8x0.5 Washers (6pcs) for Colossus XT, G36812

These are the CEN Racing M3x8x0.5 Washers (6pcs) for the Colossus XT.

RPM

RPM Rear A-Arms for Traxxas Slash 2WD - Blue, 80595

RPM Rear A-Arms for the Traxxas Slash 2wd are designed specifically for the Slash – they are not multi-platform A-arms like the stock versions. Our first design challenge was to beef up our version...

RPM

RPM Rear A-Arms for Traxxas Slash 2WD - Green, 80594

RPM Rear A-Arms for the Traxxas Slash 2wd are designed specifically for the Slash – they are not multi-platform A-arms like the stock versions. Our first design challenge was to beef up our version...

SAVOX

Savox SH11p Servo Horn - Full Set

The Savox SH11p Digital Servo Horn Set for SH0253, SH0254, SH0256 and SH0350 servos.

RPM

RPM Caster Blocks for Traxxas Electric Rustler/Stampede/Bandit/Slash 2WD - Blue, 80715

(Fits all versions including XL-5 & VXL models)

ST RACING CONCEPTS

ST RACING CNC Machined Aluminum Caster Blocks (Green), 3632G

Using high quality CNC machined aluminum, these aluminum caster blocks greatly increase the strength of the front suspension of your car or truck while adding that factory look to your ride.

RPM

RPM Rear Bearing Carriers for Traxxas Electric Rustler/Stampede/Bandit/Slash 2WD - Blue, 80385

Up to this point, e-Rustler, e-Stampede, Slash 2wd & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s New Front and...

ROBINSON RACING

Robinson Racing 23T Extra Hard 5mm Brushless Motor Pinion Gear, 8723

This is the Robinson Racing 23T Extra Hard 5mm Bore (.8 module) Brushless Motor Pinion Gear. Robinson Racing extra-hard high carbon brushless motor pinion gears are built to work with our...

RPM

RPM Heavy-Duty Camber Links for Traxxas Electric Rustler and Stampede - Blue, 81265

Broken parts lead to trips to the hobby shop and lots of down time to repair your vehicle! RPM’s New Heavy Duty Camber Links will completely eliminate broken camber links on your Rustler or Stampede,...

ASSOCIATED

Associated 60Wt Silicone Shock Oil 2oz, 5436

Keep your shocks ready for the toughest challenges with Associated brand Shock Oils.

HOBBY PEOPLE

HP Heli's Heat Sink w/Cover and Battery Holder for the X-2 Coaxial Helicopter, 5P31003

This is the HP Heli's Heat Sink/Cover and Battery Holder for the X-2 Coaxial Helicopter (5P31003).

ROBINSON RACING

Robinson Racing 13T Extra Hard 5mm Brushless Motor Pinion Gear, 8713

This is the Robinson Racing 13T Extra Hard 5mm Bore (.8 module) Brushless Motor Pinion Gear. Robinson Racing extra-hard high carbon brushless motor pinion gears are built to work with our...

HOT RACING

Hot Racing Aluminum Rear Hubs (Stub Axle Carriers) for Traxxas Maxx 4S

Hot Racing Aluminum Rear Hubs (Stub Axle Carriers) for Traxxas Maxx 4S These are Hot Racing Aluminum Rear Hubs (Stub Axle Carriers) for the Traxxas Maxx 4S 1/10 Monster Truck. CNC machined aluminum...

RPM

RPM Replacement 0° & 3° Rear Mounts for RPM Gearbox Housings, 73642

These are replacement 0° & 3° rear mounts for RPM #73612, #73614 & #73615 Gearbox Housings for Traxxas 1:10 scale 2wd vehicles. Each package contains (1) left 0° rear mount; (1) right 0° rear mount;...

RPM

RPM Wheelie Bar Mount for Traxxas Rustler 4X4, 80962

RPM eliminated the Traxxas Rustler 4X4 rear bumper / wheelie bar entirely! Instead, RPM opted for more adjustability and a solid mount that allows a wheelie bar to work properly. The design is based...

RPM

RPM Upper and Lower A-Arms for Traxxas X-Maxx - Orange, 82358

Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out...

HOBBYWING

Hobbywing XeRun V10 G3R 25.5T Sensored Brushless Motor, 30401133

This is the Hobbywing XeRun V10 G3R 25.5T Sensored Brushless Motor. Design matters. It’s a motor specially designed for Extremely High-Level Racing. The RMP of G3 Stock motor is significantly...

EXTREME-FLYERS

Extreme-Flyers X350 Bushing Adapter to Connect Original Blade to New Model Blade Grips, 204300

This is the Extreme-Flyers X350 Bushing Adapter to connect the original blades to the newer X350 model blade grips.

HOT RACING

Hot Racing CNC Aluminum Steering Link Set for Traxxas X-Maxx

This is the Hot Racing CNC Aluminum Steering Link Set for Traxxas X-Maxx. This is an optional, aluminum steering linkage for Traxxas X-Maxx. Includes two black aluminum steering linkages with Steel...

CEN

CEN Racing 3x6 Flanged Bushing, GS012

This is the CEN Racing 3x6 Flanged Bushing (GS012). This part is used on several specified CEN vehicles as well as the Nitro Colossus and Colossus XT models.

EXTREME-FLYERS

Extreme-Flyers X350 Screw Set, 5P31007

This is the Extreme-Flyers X350 Screw Set.

RACERS EDGE

Racers Edge Female TRX to Male EC3 Adapter, 1610

This is a new Racers Edge adapter. It has an original (legacy) Traxxas Female Plug to a Male EC3 Plug. This adapter allows a battery equipped with an EC3 connector to be used with a Traxxas ESC.

MEGATECH

Megatech Mantis Tail Rotor Blade

This is the replacement tail rotor blade for the Megatech Mantis remote control helicopter. If an unfortunate accident has left you needing replacement RC airplane parts, then look no further than...

RPM

RPM Axle Carriers for Traxxas 1/16th E-Revo/Slash/Rally - Blue, 73165

There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale E-Revo, Slash & Rally, there is absolutely no slop adjustment for...

CEN

CEN Racing M3x15mm Flat Head Screws (6-pcs) for Colossus XT, G36110A

These are the CEN Racing M3x15mm Flat Head Screws for the Colossus XT.

RPM

RPM Wide Front A-Arms for Traxxas Electric Rustler/Electric Stampede 2WD - Red, 70669

RPM Wide Front A-Arms for Traxxas Electric Rustler/Electric Stampede 2WD - Red, 70669 Looking to increase the stability of your electric Rustler or Stampede 2WD truck? Here's the answer! RPM just...

RPM

RPM Front Skid Plate for Traxxas Slash 2WD - Black, 81252

RPM Front Skid Plates for the Traxxas Slash 2wd are designed using the same principles we used when creating our Slash 2wd rear skid plates. Our ultimate goals were to create a front skid plate that...

RPM

RPM Front Bulkhead for Most Traxxas 1/10 2WD Vehicles - Blue, 73755

One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed...

MEGATECH

Megatech Fantail Flyer Horizontal Tail

This is the replacement horizontal tail for the Megatech Fantail Flyer remote control airplane. If an unfortunate accident has left you needing replacement RC airplane parts, then look no further...

VENOM

Venom Shaft with Gear - Micro Troop Transporter, 7936

This is the replacement shaft with gear for the Venom Micro Troop Transporter remote control helicopter.Venom Parts #: VENF-7936All Venom copy and images are provided courtesy of Venom Group...

VENOM

Venom Tail Blade - Kona Kopter & Black Hawk, 7939

This is the replacement tail blade for the Venom Kona Kopter and Black Hawk remote control helicopters.Venom Parts #: VENF-7939All Venom copy and images are provided courtesy of Venom Group...

VENOM

Venom Night Ranger 3D Micro Tail Rotor Blade, 7858

This is the replacement tail rotor blade for the Venom Air Corps™ Night Ranger 3D Micro™ remote control helicopter. If an unfortunate accident has left you needing replacement RC helicopter parts,...

VENOM

Venom Mantis Main Rotor Blade Set, 7585

This is the replacement main rotor blade set for the Venom Air Corps™ Mantis remote control helicopter. If an unfortunate accident has left you needing replacement RC helicopter parts, then look no...

VENOM

Venom Blade Set - Micro Troop Transporter, 7932

This is the replacement blade set for the Venom Micro Troop Transporter remote control helicopter.Venom Parts #: VENF-7932All Venom copy and images are provided courtesy of Venom Group International™

MEGATECH

Megatech Ambassador Spinner Cone, Back Plate & Screws

This is the spinner cone, back plate and screws for the Megatech Ambassador 4-channel remote control airplane. If an unfortunate accident has left you needing replacement RC airplane parts, then...

HOBBY PEOPLE

HP Heli's Outer Main Shaft w/Gear for the X-2 Coaxial Helicopter, 5P3009

This is the HP Heli's Outer Main Shaft with Gear for the X-2 Coaxial Helicopter (5P3009).

MEGATECH

Megatech Housefly Unlimited Rubber O-Rings (16)

These are the replacement rubber o-rings for the Megatech HouseFly Unlimited remote control helicopter. If an unfortunate accident has left you needing replacement RC helicopter parts, then look no...

VENOM

Venom Mantis Canopy Mount, 7589

This is the replacement canopy mount for the Venom Air Corps™ Mantis remote control helicopter. If an unfortunate accident has left you needing replacement RC helicopter parts, then look no further...

VENOM

Venom Mantis Tail Motor Cover, 7593

This is the replacement tail motor cover for the Venom Air Corps™ Mantis remote control helicopter. If an unfortunate accident has left you needing replacement RC helicopter parts, then look no...