Coupon Add Catergory

SAVOX

Savox SGSH0263MG Gear Set with Bearings for SH0263MG

The Savox SGSH0263MG Servo Gear Set is the replacement gears for the SH-0263MG servo.

RPM

RPM Adjustable Rear Body Mounts and Posts for Traxxas Slash 2WD/Stampede/Nitro Stampede, 81142

Immediately after releasing our Adjustable Body Mounts for the Traxxas Slash 4x4 (#73932), RPM customers with the 2wd version of the Slash wanted adjustable, more durable body posts too. RPM...

RPM

RPM Bulkhead Braces for the Traxxas T/E-Maxx - Black, 80152

(Fits All Versions of the T-Maxx & E-Maxx) The Bulkheads on the T-Maxx & the E-Maxx tend to break under impact due to lack of support. That’s why RPM has designed these braces to add much needed...

DHK

DHK Suspension Arm Upper Right Assembly for the Wolf and Raz-R, 8131-50R

This is the DHK Suspension Arm Upper Right Assembly for the Wolf and Raz-R (8131-50R).

DHK

DHK Complete Center Differential Gearbox for the Hunter Brushless SCT, 8331-200

This is the DHK Complete Center Differential Gearbox for the Hunter Brushless SCT (8331-200).

MEGATECH

Megatech Megapro Transmitter Antenna

This is the replacement stock transmitter antenna for the remote control Megatech MegaPro Truck & Buggy and ProPulse Truck & Buggy. If an unfortunate accident has left you needing replacement RC car...

RPM

RPM Front Bumper and Skid Plate for Traxxas Slash 2WD - Chrome, 80953

They’re here! An all-new bumper design for the Traxxas Slash 2wd (the only molded bumper made in the USA)! Our two-piece design is simple, yet strong, effective and highly attractive. We made it a...

DHK

DHK Steering Tie Rods (2pcs), 8381-9Z1

These are the DHK Steering Tie Rods for the DHK Optimus, Optimus XL, Zombie 8e, and 1/10th DHK vehicles.

SAVOX

Savox CSH0263MG Servo Case for SH0263MG

The Savox CSH0263MG Digital Servo Case is the replacement case for the SH0263MG servo.

DHK

DHK Front Bumper and Upper Front Suspension Arm Mount, 8381-720T

This is the DHK Front Bumper and Upper Front Suspension Arm Mount for the DHK Optimus, Optimus XL and 1/10th DHK vehicles (8381-720T).

DHK

DHK 7-Cell NiMh Battery Charger 800mAh (T-Conn), H131

This is the 7-Cell NiMh Battery Charger 800mAh with T-Connector (aka Deans Plug). It is used with the stock battery of several specified DHK vehicles.

DHK

DHK 43T Center Diff Gear for 1/8 Electric DHK Vehicles, P122

This is the DHK 43T Center Diff Gear for the 1/8 Electric DHK Vehicles (P122). Made of zinc alloy.

DHK

DHK Complete Servo Saver for Optimus and Zombie Electric Models, 8381-600

This is the DHK Complete Servo Saver for Optimus and Zombie Electric Models (8381-600).

HUBSAN

Hubsan Lynx Lower Grip Mount, H201-13

This is the Hubsan Lynx Lower Grip Mount. Works on FPV model only.

DHK

DHK Shocks (2) for the Wolf and Raz-R, 8131-300

These are DHK Shocks for the Wolf and Raz-R (8131-300). Includes 2 shocks.

RAGE

Rage Black Marlin MX/Aqua Dart Rudder Servo, B1118

This is the Rudder Servo for the Rage Lightwave, Lightwave 400BL, Black Marlin MX, and Aqua Dart micro race boats.

RPM

RPM Rear A-Arms for Traxxas Slash 2WD - Pink, 80597

RPM Rear A-Arms for the Traxxas Slash 2wd are designed specifically for the Slash – they are not multi-platform A-arms like the stock versions. Our first design challenge was to beef up our version...

RPM

RPM Rear Shock Tower for Traxxas Electric Rustler/Stampede/Bandit/Slash 2WD, 80832

(Fits the Traxxas Slash 2wd, Electric Stampede, Rustler & Bandit) RPM Rear Shock Towers for the electric versions of the Stampede,

CEN

CEN Racing Toe-In Bar for Colossus XT, GS255

This is the CEN Racing Toe-In Bar for the Colossus XT.

ATOMIK

Atomik Wheel Axle for MM 1/18 RC Rally Car and Raptor SCT, 9111

This is the Wheel Axle for the Atomik Metal Mulisha 18th RC Ford Fiesta Rally Car and Ford Raptor Short Course Truck (9111)

RPM

RPM Wide Front Bumper for Traxxas Rustler/Stampede/Bandit/Nitro Sport - Red, 81169

Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro Sport or Bandit added protection with the RPM Wide Front Bumper. This bumper stands six inches wide and adds an extra 1-1/2" worth of...

RAGE

Rage Black Marlin Equipment Mount Set, B1216

This is the Equipment Mount Set for the Rage Brushed and Brushless Black Marlin Race Boats.

SAVOX

Savox SGSH1357 Servo Gear Set for SH1357

The Savox SGSH1357 Digital Servo Gear Set is the replacement gears for the SH1357 servo.

ATOMIK

Atomik Pushrod for Whiplash Brushless RC Race Boat, 18053

This is the Pushrod for the Atomik Whiplash Brushless RC Race Boat (18053)

RPM

RPM Rear Bulkheads for the Traxxas T/E-Maxx - Blue, 81075

(Fits All Versions of the T-Maxx & E-Maxx)   RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with our front bulkheads (RPM #81062 or #81065) are available to further improve the durability of...

DHK

DHK Shock Adjustment Ring and O-Ring (2pcs) for 1/8 Scale Models, 8381-303

This is the DHK Shock Adjustment Ring and O-Ring for 1/8 Scale Models (8381-303). Includes 2 sets.

RPM

RPM Rear A-Arms for Traxxas Electric Stampede 2WD and Rustler - Blue, 80185

RPM Rear A-Arms for the electric versions of the Traxxas Rustler & Stampede 2wd are stronger and more durable than stock versions, but we’ve also managed to eliminate over 7 grams of weight per arm!...

DHK

DHK Servo Saver Spring for 1/8 Scale Models (4pcs), 8381-603

This is the DHK Servo Saver Spring for 1/8 scale DHK vehicles (8381-603). Includes 4 pieces.

DHK

DHK Tires with Foam for Maximus and Zombie 1/8 Trucks (2pcs), 8382-707

These are the DHK Tires with Foam Inserts for the Maximus and Zombie 1/8 Trucks (8382-707). Includes 2 pieces.

DHK

DHK Steering Linkage (2) for the Wolf and Raz-R, 8131-6Z0

This is the DHK Steering Linkage for the Wolf and Raz-R (8131-6Z0).

DHK

DHK Upper Chassis Brace for Crosse Monster Truck, 8136-002

This is the DHK Upper Chassis Brace for the Crosse Monster Truck (8136-002).

RPM

RPM Front A-Arms for Traxxas Electric Rustler/Electric Stampede/Slash 2WD - Black, 80242

RPM Front A-Arms for the Traxxas Slash 2wd, e-Rustler & e-Stampede are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM...

DHK

DHK Center Rear Drive Shaft B for the Optimus and Zombie Electric Models, 8381-006

This is the DHK Center Rear Drive Shaft B for the Optimus and Zombie Electric Models (8381-006).

DHK

DHK 11T Pinion Gear (for New Gearbox Version), 8133-103T

This is the DHK 11T Pinion Gear for the Raz-R, Wolf, and other Brushed Versions that have the newly redesigned differential gearbox (8381-118T). Please note that you must use differential gearbox...

DHK

DHK Upper Hinge Pins (4pcs), 8381-719

These are the DHK Upper Hinge Pins for several specified DHK vehicles (8381-719). Includes 4 pieces.

DHK

DHK Pins 2x8mm (16pcs), 8381-115

These are the DHK Pins 2x8mm (8381-115) for use with several specified DHK vehicles.

DHK

DHK M4 Screw Washer (4-pcs), 8385-003

This is the DHK M4 Screw Washer (4-pcs) for the Shogun Truggy and other specified DHK vehicles (8385-003).

DHK

DHK Motor Mount for Shogun Truggy, 8385-9M1

This is the DHK Motor Mount for the Shogun Truggy (8385-9M1).

RAGE

Rage Black Marlin 390A Brushed Motor, B1220

This is the Brushed Motor for the Rage Black Marlin. Fits the following:   Black Marlin Brushed Black Marlin EX Brushed

DHK

DHK High Speed Needle Valve O-Ring for H119 .21 Nitro Engine, L004

This is the DHK High Speed Needle Valve O-Ring for the H119 .21 Nitro Engine (L004).

DHK

DHK 3x10mm BH Coarse Thread Screw (16pcs), 8381-703

This is the DHK 3x10mm BH Coarse Thread Screw for several specified DHK vehicles (8381-703). Includes 16 pieces.

DHK

DHK 12T Pinion Gear for Maximus 1/8 Electric Truck, 8382-9M1

This is the DHK 12T Pinion Gear for the Maximus 1/8 Electric Truck (8382-9M1).

DHK

DHK Upper Suspension Arm Linkage (2) for the Wolf and Raz-R, 8131-502

This is the DHK Upper Suspension Arm Linkage for the Wolf and Raz-R (8131-502).

DHK

DHK Motor Mount for the Wolf and Raz-R, 8131-9M1

This is the DHK Motor Mount for the Wolf and Raz-R (8131-9M1).

DHK

DHK Servo Saver Shaft (2pcs), 8381-608

These are the DHK Servo Saver Shafts for several specified DHK vehicles (8381-608). Includes 2 pieces.

DHK

DHK Shock Shaft (4pcs), 8381-309

These are the DHK Shock Shafts for several specified DHK vehicles (8381-309). Includes 4-pieces.

ALIGN

Align T-Rex 100X/S Vertical Stabilizer, H11013A

This is the Align T-Rex 100 Vertical Stabilizer. Works with either the 100S or 100X versions.

RAGE

Rage Propeller Shaft with Gear for Beechcraft/Taylorcraft Micro RTF, A1194

This is the replacement Propeller Shaft with Gear for the Rage Beechcraft Model 17 Staggerwing and Taylorcraft Micro RTF Airplanes.

DHK

DHK Upper Shock Pivot Balls for the Crosse Brushless, 8136-313

These are the DHK Upper Shock Pivot Balls for the Crosse Brushless Monster Truck (8136-313).

SAVOX

Savox SGSH1290MG Servo Gear Set for SH1290mg

The Savox SGSH1290MG Digital Servo Gear Set is the replacement gears for the SH1290mg servo.

DHK

DHK 4mm Lock Nuts (4) for the Hunter SCT, 8135-704

These are the DHK 4mm Lock Nuts (4) for the Hunter Brushed and Brushless SCT (8135-704).

RPM

RPM Front Upper & Lower A-Arms for Traxxas 1/16th E-Revo - Red, 80699

Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed...

ATOMIK

Atomik Lower Hinge Pin 2pcs for MM 1/18 RC Rally Car and Raptor SCT, 9129

This is the Lower Hinge Pin 2pcs for the Atomik Metal Mulisha 18th RC Ford Fiesta Rally Car and Ford Raptor Short Course Truck (9129)

SAVOX

Savox SH21p Servo Horn - Full Set

The Savox SH21p Digital Servo Horn Set for SC0352, SG0351, SH1350, and SH1357 servos.

DHK

DHK Center Diff Outdrive for Optimus and Maximus GP 1/8 Nitro Trucks, 9381-202

This is the DHK Center Diff Outdrive for the Optimus and Maximus GP 1/8 Nitro Trucks (9381-202).

ATOMIK

Atomik Button Head Screws M2.5X6 for MM 1/18 RC Rally Car and Raptor SCT, 9154

These are the Button Head Screws M2.5X6 for the Atomik Metal Mulisha 18th RC Ford Fiesta Rally Car and Ford Raptor Short Course Truck (9154)

DHK

DHK Fuel Tubing Holders for Optimus and Maximus GP 1/8 Nitro Trucks, 9381-007

These are the DHK Fuel Tubing Holders for the Optimus and Maximus GP 1/8 Nitro Trucks (9381-007).

DHK

DHK Pull Start Assembly for H119 .21 Nitro Engine, A PARTS-4

This is the DHK Pull Start Assembly for the H119 .21 Nitro Engine (A PARTS-4).

DHK

DHK 21T Pinion Gear Bronze for the Wolf Brushed Version, 8133-9M1

This is the DHK 21T Pinion Gear Bronze for the Wolf Brushed Version (8133-9M1). Includes M3x3 set screw.

DHK

DHK 2x16mm Pins (14pcs), 8381-712

These are the DHK 2x16mm Pins for several specified DHK vehicles (8381-712). Includes 14 pieces.For Use With: Maximus 1/8 Electric Optimus 3S 1/8 Electric