MT-4S Super Computer 2.4Ghz Radio with SSL & Telemetry:
Ultimate Technology and Airtronics Power!
Ultimate Technology and Airtronics Power!
Get ready for the New Airtronics MT-4S 2.4Ghz FH4T 4-Channel Telemetry-Capable Radio System with RX-472 Super Response Receiver and Sanwa Synchronized Link (SSL). The MT-4S expands on the feature-rich design of the original MT-4 by incorporating Sanwa Synchronized Link support, heightened response time (same as the Airtronics M12), a sharp backlit LCD screen, the RX-472 Super Response Receiver, and updated steering wheel and graphics.
- 4-Channel 2.4GHz FH4T Digital High-Response Telemetry System with Advanced Programming
- Backlit LCD Screen Allows You to Easily View Programming Options and Telemetry Data in All Types of Conditions
- High-Power FH4T Technology Provides the Best Reception and Connectivity, Giving Racers Added Assurance
- 4-Cell Dry Battery Holder for Lighter Weight - Also Accepts Optional NiCd/NiMH or 2S LiPo/LiFe Battery Packs
- Includes RX-472 2.4GHz FH4T Super Response Receiver w/Sanwa Synchronized Link Support
- 18 Model Memory
- Telemetry Logging
- Channel Set Menu
- Servo Reversing
- Steering, Throttle and Brake Dual Rate
- End Point Adjustment
- Exponential and ARC Adjustment
- Servo Speed Adjustment
- Anti-Lock Braking
- Throttle Offset
- Lap and Interval Timers
- Total, Best and Individual Lap Display
- Four Wheel Steering Mixing
- Dual Throttle Mixing w/Dig & Burn
- Normal, SSR and SHR Servo Modes
- Center or Parallel Trim Types
- CODE Auxiliary
- Step Auxiliary
- Point Auxiliary
- Auxiliary Mixing
- Programmable Fail Safe
- Receiver Battery Voltage Fail Safe
- Digital Trims
- Servo Sub-Trim
- Adjustable Throttle Trigger
- Programmable Switches, Lever and Dial
- Adjustable Steering Wheel
- Adjustable Grip
- Variable Rate Adjustment
- Model Naming
- Model Select
- Direct Model Select
- Model Clear
- Selectable Modulation Type
- Adjustable LCD Contrast and On-Time
- Adjustable Key Volume and Tone
- Programmable Low Voltage Alarm
- Inactivity and Over Voltage Alarms
- Digital Battery Voltage Monitor
Transmitter Specifications:
- Output Power: 100mW
- Nominal Input Voltage: 4.8v ~ 7.4v
- Operating Voltage Range: 4.0v ~ 9.6v
- Dry Weight: 13.68oz (388gr)
- Modulation Type: FH2, FH3, FH3F, FH4T, FH4FT
RX472 (92015) Receiver Specifications:
- Frequency: 2.4GHz FH3/FH4T Selectable Via Transmitter
- Nominal Input Voltage: 3.7v ~ 7.4v
- Weight: 0.23oz (6.6gr)
- Dimensions: 1.18 x 0.91 x 0.55in (30.0 x 23.3 x 14.0mm)
- Fail Safe Limit: 3.5 to 5.0v (FH3) / 3.5 to 7.4v (FH4T)
What's In The Box:
- MT-4S Digital High-Response Telemetry Transmitter
- RX-472 Super Response Receiver w/SSL Support
- On/Off Switch
- Dry Cell Receiver Battery Holder
- Optional Large Grip
- Wrist Strap Anchor
- Optional Throttle Trigger Angle Brackets
- Receiver Dust Boot Covers
Items Required, But Not Included:
- Transmitter Batteries: (4) "AA"' Alkaline or NiCd/NiMH cells; or 2S LiPo or 2S LiFe Battery Pack for Transmitter
- Servos and/or ESC - Airtronics/Sanwa recommend using digital servos and ESCs that support a high frame rate if possible. Because of the extremely high frame rate of the MT-4S transmitter and RX-472 Super Response Receiver, analog servos and many ESCs may not be compatible when used in the SHR or SSR servo operating modes. To avoid compatibility issues, use analog servos only in the NOR servo operating mode. If your ESC will no operate in SHR servo operating mode, then use the NOR servo operating mode. You have a lot of flexibility as any brand and type of digital servo can be used with NOR or SHR servo operating modes. Note that only Airtronics/Sanwa SRG series digital servos are compatible for use with the SSR servo operating mode.
- Telemetry Capable Airtronics receiver required (RX-461 or RX-462) for full Telemetry capability.
1 Review Hide Reviews Show Reviews
-
So far so good
This is a "MAJOR" improvement from the stock HPI 2.4ghz Transmitter. I wont be using all of the features yet, but as I learn I will be utilizing them, and they will prove to be irreplaceable!!