Traxxas Nitro Stampede Driveline & Steering

TRAXXAS

Traxxas Rear Stub Axle Green Aluminum, 1952G

These are the optional Green Aluminum Rear Stub Axle Carriers for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Servo Saver, 1844

This is a large servo saver that can be used in Traxxas vehicles or any vehicle that requires a large style servo saver.

TRAXXAS

Traxxas Rear Stub Axle Blue Aluminum, 1952X

These are the optional 1.5° Aluminum Rear Stub Axle Carriers for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Rear Stub Axles, 2753X

These are the Rear Stub Axles for several Traxxas R/C vehicles, including the Bandit, Stampede and Rustler. FEATURES: Metal construction; black and silver in color. INCLUDES: Two rear stub axles and pins.

TRAXXAS

Traxxas Ball Bearings, 5x8x2.5mm (2), 2728

These are the 5x8x2.5mm bearings for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Caster Blocks (30-degree, left & right), 2632R

This is a set of optional left & right 30-degree caster blocks for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Rod Ends (short w/hollow balls, 6), 2742X

This is the 6-piece Short Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas Half Shaft Pro-Pack (6), 1953

This is a set of the Traxxas telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks and come with the shafts only. Dimensions: 2.5" long when fully compressed.

TRAXXAS

Traxxas Differential Output Yokes (white, w/screws & pins), 4628

This is the Replacement Differential Output Yokes Set for several Traxxas R/C vehicles. FEATURES: White nylon differential output yokes. INCLUDES: 2 White nylon yokes; 4 3x3mm set screws (.5 pitch); 2 3x5mm countersunk screws (.5 pitch); 2 3x12mm yoke...

TRAXXAS

Traxxas Tie Bar (fiberglass), 2532

This is a Firberglass Tie Bar for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts, 6757

This is the Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Rear Stub Axle Red Aluminum, 1952A

These are the optional 1.5° Red Aluminum Rear Stub Axle Carriers for several specified Traxxas R/C vehicles. Traxxas aluminum stub axle carriers add both strength and beauty without compromising the track-bred suspension geometry. Complete installation...

TRAXXAS

Traxxas Wheel Hubs (hex w/pins, 2), 1654

These are the replacement rear wheel adapters for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Rod Ends (long w/hollow balls, 6), 2742

This is the 6-piece long Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas 82mm Turnbuckles Nitro Stampede, 2337

These are the Steering Turnbuckles for the Traxxas Nitro Stampede.

TRAXXAS

Traxxas Servo High-Torque Waterproof (blue case), 2056

This is the replacement High Torque Waterproof Servo for several Traxxas R/C vehicles. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these. INCLUDES: One High Torque Servo with J style...

TRAXXAS

Traxxas Anti-Squat Wedges (1.5 & 3.0 degree) (2), 1934

This Pro Series Rake is for use under the front bulkhead to increase rake angle. It can also be used with the Pro Series transmission to increase or decrease anti-squat geometry in the rear.

TRAXXAS

Traxxas Front Bulkhead (black), 2530

This is a Stock Replacement Front Bulkhead (black) used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece.

TRAXXAS

Traxxas Rear Stub Axle Carriers, 1952

These are the axle housings (or hub carriers) used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Servo Saver w/adapters, 3744

This is the replacement servo saver for several Traxxas vehicles. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos.

TRAXXAS

Traxxas Half Shafts (long truck w/metal U-joints, 4), 1951

This is a set of telescoping drive shafts for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Rod Ends Set (w/hollow balls & screws), 1942

This set of rod ends, balls, and screws is used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Front Bulkhead (grey), 2530A

This is a Stock Replacement Front Bulkhead (grey) used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece.

TRAXXAS

Traxxas Differential Output Yokes (hardened steel w/U-joints), 4628X

These are hardened steel drive yokes for several Traxxas R/C vehicles, such as the Rustler and Stampede. Features hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation.

TRAXXAS

Traxxas Stub Axle Pins (4), 2754

These are replacement stub axle pins for several Traxxas R/C vehicles. These pins slide through the axle and hold the wheel to the axle.

TRAXXAS

Traxxas Servo High-Torque for T-Maxx and E-Maxx, 2055

This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx or any other vehicle that you would like to mount this in. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these...

TRAXXAS

Traxxas Steering Blocks and Wheel Spindles, 2536

These are Replacement Steering Blocks and Wheel Spindles for the Traxxas Nitro Rustler, Nitro Stampede, and Nitro Sport.

TRAXXAS

Traxxas Caster Blocks (25-degree, left & right), 2634R

This is a set of optional left & right 25-degree caster blocks for several Traxxas R/C vehicles.