Traxxas Nitro Sport Engine & Electronics

TRAXXAS

Traxxas Digital High-Torque Servo (ball bearing), 2070

This is the Digital High Torque Traxxas Servo. FEATURES: Ball bearings; Black plastic construction.

TRAXXAS

Traxxas Super Duty Glow Plug (long-medium w/gasket), 3232X

This is the Traxxas Super Duty Long Glow Plug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines. Suited for the varied throttle range of off-road racing; Medium heat range. INCLUDES: One Traxxas Medium Heat Range Super Duty...

TRAXXAS

Traxxas EZ-Start Starting System, 4570

This is the original Easy Start Starting System for Traxxas Nitro Vehicles using the Traxxas TRX and TRX PRO Engines.

TRAXXAS

Traxxas Waterproof Digital High-Torque Digital Metal Gear Servo, 2270

This is the New Traxxas Waterproof Digital High-Torque Digital Metal Gear Servo. The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 236 oz-in of torque on tap and full metal gears, the 2270 servo provides a...

TRAXXAS

Traxxas EZ-Start Gearbox, 4575

This is the stock replacement EZ start gearbox for Traxxas vehicles.

TRAXXAS

Traxxas Engine Mount Set Nitro Rustler/Sport, 4460

This is the 2-piece Aluminum Engine Mount Set for the Traxxas Nitro Sport and Rustler.

TRAXXAS

Traxxas Wiring Harness for Receiver Power Pack, 3034

This is an optional Receiver Switch Harness with Charge Jack for most Traxxas Nitro Vehicles except for the Traxxas Revo. Includes on/off switch and charge jack.

TRAXXAS

Traxxas Servo Saver, 1844

This is a large servo saver that can be used in Traxxas vehicles or any vehicle that requires a large style servo saver.

TRAXXAS

Traxxas Servo Gears for 2055 and 2056 servos, 2053

This is a replacement Gear set for the Traxxas 2055 and 2056 servos.

TRAXXAS

Traxxas One-Way Starter Bearing, 4011

This is the stock replacement One-Way Bearing for the Traxxas engines. This bearing is located on the starter shaft.SPECS: Inner bearing diameter: 6mm (0.24")NOTES: This bearing is unique to this engine, and cannot be substituted byanother bearing.

TRAXXAS

Traxxas Clutch Shoes & Spring (N. Rustler/N.Sport/N.Stampede), 4146

This is the Stock Replacement Clutch Shoes and Spring set for the Nitro Stampede, Nitro Rustler & Nitro Sport. These shoes are located underneath the clutch bell.

TRAXXAS

Traxxas Clutch Bell (18-tooth), 4118

This is the Traxxas 18 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Air Filter Foam Insert, 4061

This is the Pre-Oiled Air Filter Foam Insert for the Nitro Stampde & other Traxxas Nitro Powered Vehicles.

TRAXXAS

Traxxas Servo Case for 2055 Servo, 2052

This is the Servo Case Set for the Traxxas #2055 Servo.

TRAXXAS

Traxxas EZ-Start Control Box, 4580

This is the Replacement EZ Start Control Box for the Traxxas EZ Start.

TRAXXAS

Traxxas Metal Gear Set (for 2070, 2075 servos), 2072X

This is the replacement Metal Gear Set for the 2070 & 2075 Servo.

TRAXXAS

Traxxas Flywheel Large for Starter Boxes, 6542X

This is the Traxxas Large Flywheel. It is knurled for use with starter boxes.

TRAXXAS

Traxxas Header Screws 3x23mm Cap Hex, 2556

These are 3x23mm Header Screws from Traxxas.

TRAXXAS

Traxxas Flywheel, 4142

This is the aluminum 2-pin flywheel used on several Traxxas R/C trucks.

TRAXXAS

Traxxas EZ Start 2 Control Box Battery Cover with Belt Clip, 5281

This is the Traxxas EZ Start 2 Control Box Battery Cover with Belt Clip.

TRAXXAS

Traxxas EZ Start Motor, 4578

This product is the replacement motor for the Traxxas EZ Start System.

TRAXXAS

Traxxas Heat Shield Tubing Fiberglass, 3149A

This is the Traxxas Heat Shield Tubing.

TRAXXAS

Traxxas Servo High-Torque Waterproof (blue case), 2056

This is the replacement High Torque Waterproof Servo for several Traxxas R/C vehicles. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these. INCLUDES: One High Torque Servo with J style...

TRAXXAS

Traxxas Rubber Exhaust Pipe, 4451

This is the rubber exhaust pipe for the Traxxas Nitro Sport and other units with side exhaust.

TRAXXAS

Traxxas Lead Wire Glow Plug Blue for EZ-Start and EZ-Start 2, 4581X

Traxxas glow plug lead wire for the EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Blue silicone insulated wire with pre-installed connectors.

TRAXXAS

Traxxas Gears Set (for 2070, 2075 servos), 2072A

This is the replacement Gear Set for the 2070 & 2075 Servo. Replaces original Traxxas part #2072.

TRAXXAS

Traxxas Lead Blue Glow Plug Wire for EZ-Start and EZ-Start 2, 4581

This is the Lead Blue Glow Plug Wire for the Traxxas EZ-Start and EZ-Start 2.

TRAXXAS

Traxxas TRX Pro.15 to TRX 2.5/2.5R Upgrade Kit, 4400

This is the Pro .15 to TRX 2.5 engine conversion set from Traxxas. It allows you mount the newer 2.5 engine to an older Nitro Rustler, Nitro Sport and Nitro Stampede.

TRAXXAS

Traxxas Air Filter (w/rubber base & foam insert), 4060

This is the Air Filter for Traxxas Nitro Powered Vehicles. This Filter fits over the carburetor and prolongs engine life by preventing dirt from entering engine.FEATURES: Constructed of black rubber with oiled foam insert.INCLUDES: One Air Filter for...

TRAXXAS

Traxxas 2-Ch Receiver 27Mhz without BEC, 2019

This is the Traxxas 27mHz Two Channel AM Receiver Without BEC. For use with electronic speed control.

TRAXXAS

Traxxas Wiring Harness Connector for EZ-Start and EZ-Start 2, 4579

This is the Original Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into.

TRAXXAS

Traxxas Clutch Bell (20-tooth), 4120

This is the Traxxas 20 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Battery Holder 4-Cell with Futaba Connector, 3039

This is the 4C Battery Holder w/Futaba Connector for the Traxxas Nitro Jato Stadium Truck and other specified Traxxas R/C vehicles. No on/off switch.

TRAXXAS

Traxxas Aluminum Tuned Pipe/Header Set Blue, 4485

This is an Aluminum Tuned Pipe and Header Assembly for the Traxxas Nitro Sport and Rustler. Fits any car with a side exhaust and sideways mounted .12-.15 size engine. Complete with mounting hardware. Provides strong power across mid and upper RPM range.

TRAXXAS

Traxxas Silicone Exhaust Coupler, 4941

This is the Replacement Silicone Exhaust Coupler for securing the tuned pipe to the header (manifold) on the Traxxas TRX 15 Engine.

TRAXXAS

Traxxas Clutch Bell (22-tooth), 4122

This is the Traxxas 22 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Recoil Pull Starter (.12 & .15), 4070

This is the Replacement Recoil Starter Assembly for the Traxxas TRX-12, TRX-15 and Pro-15 Engine.INCLUDES: One Recoil Starter Unit w/String and Handle InstalledCOMMENTS: This doesn't have the backplate or any of the attachment hardware. For the One-Way...

TRAXXAS

Traxxas Servo High-Torque for T-Maxx and E-Maxx, 2055

This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx or any other vehicle that you would like to mount this in. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these...

TRAXXAS

Traxxas EZ Start 2 Complete Control Box, 5280

This is the Traxxas EZ Start 2 Complete Control Box.

TRAXXAS

Traxxas Tuned Pipe Assembled, 4452

This is an Assembled Tuned Pipe for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas PowerTune Cooling Head TRX 2.5/2.5R, 5237

This is the Power Tune Cooling Head for the Traxxas TRX 2.5 and 2.5R with plastic head protector.

TRAXXAS

Traxxas Universal Hanger Wire 6", 4085

This is a Universal Support (hanger wire), to mount a Tuned Pipe to the chassis, from Traxxas.FEATURES: Features solid steel construction with a small loop on the end. Chrome color finish.REQUIRES: Bending and cutting to desired length.

TRAXXAS

Traxxas Rear Bumper/Battery Box/Body Clips, 4132

This is the Rear Bumper (Battery Box) for the Nitro Stampede and other Traxxas nitro vechicles.FEATURES: Durable black plastic construction.INCLUDES: One rear bumper; Two Body Clips (holds the battery cover on); One battery box; And One Easy Start...

TRAXXAS

Traxxas Clutch Bell (16-tooth), 4116

This is the Traxxas 16 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Clutch Adapter Nut, 4144

This is a replacement clutch adapter nut for the Stampede and other specified Traxxas nitro trucks. This screws onto the crankshaft of the engine (not for use with IPS crankshafts).

TRAXXAS

Traxxas 5-cell 1100mAh NiMh Receiver Battery, 3037

This is the 5 Cell 6 Volt 1100 mAh NiMH Receiver Battery for Traxxas Nitro Vehicles.

TRAXXAS

Traxxas EZ-Start Gear Set/Shafts, 4576

These are Replacement Gears and Shafts for the Traxxas EZ-Start System.