Traxxas 1/16 Slash 4WD Suspension Parts

TRAXXAS

Traxxas GTR Shock Body (hard-anodized, Teflon-coated aluminum), 7066X

This is the Hard Anodized GTR Shock Body for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas GTR Shocks Composite No Springs, 7061

These are the Composite GTR Shocks for several of the Traxxas 1/16 units, including the Rally Racer, Slash, Summit, Fiesta, and Mustang. They come fully assembled and without springs.

TRAXXAS

Traxxas Bulkhead Tie Bars (front & rear, blue-anodized aluminum), 7023

These are the Blue Anodized Aluminum Front and Rear Bulkhead Tie Bars for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Rear Suspension Arm Set for 1/16 Slash, 7032

This is the Rear Suspension Arm Set for use on the Traxxas 1/16 Slash VXL 4WD RTR.

TRAXXAS

Traxxas Axle Carriers 1/16 (left & right), 7034

These are the Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Steel Stub Axles Assembled with Yokes, 7054

These are the Assembled Stub Axles and Yokes for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Toe Links (front & rear w/hollow balls, 1/16 Slash), 7038

These are the Front and Rear Toe Links for use on the Traxxas 1/16 Slash Vehicles.

TRAXXAS

Traxxas Bumpers (front & rear) for 1/16 Slash, 7035

These are the Front and Rear Bumpers for use on the Traxxas 1/16 Slash VXL 4WD RTR.

TRAXXAS

Traxxas Pivot Balls/Caps (4), 7033

These are the Pivot Balls and Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Caps and Spring Retainers for 1/16 GTR Shocks, 7065

These are the Caps and Spring Retainers for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Rear Bulkhead (left & right), 7029X

This is the Rear Bulkhead for use on the Traxxas 1/16 E-Revo, Slash, and Rally Vehicles.

TRAXXAS

Traxxas Hollow Balls 1/16, Steel Machined, 7028X

Traxxas Steel Machined Hollow Balls for the Traxxas 1/16 Slash & E-Revo

TRAXXAS

Traxxas Push Rod w/Hollow Balls for 1/16 Slash, 7018

These are the Pushrods and Hollow Balls for use on the Traxxas 1/16 Slash VXL 4WD RTR.

TRAXXAS

Traxxas GTR Shock Body (molded composite) (2), 7066

These are the Shock Bodies for use on the Traxxas GTR Shocks.

TRAXXAS

Traxxas Titanium Coated Shafts for 1/16 GTR Shocks (2), 7063T

These are the GTR Shock Titanium Coated Shafts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Bulkhead (front, left & right), 7030X

This is the Front Bulkhead for use on the Traxxas 1/16 E-Revo, Slash and Rally Vehicles.

TRAXXAS

Traxxas Shaft for 1/16 GTR Shocks (2), 7063

These are the GTR Shock Shafts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Rebuild Kit for 1/16 GTR Composite Shocks, 7062

This is the Traxxas GTR Shock Rebuild Kit. FEATURES: Renews two GTR shocks and includes x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls.

TRAXXAS

Traxxas Plastic Bellcrank Bushings, 5x8x2.5mm (4), 2545

These are the Stock Replacement Bellcrank Bushings for the Nitro Rustler and other specified Traxxas R/C vehicles. These are located in the steering bellcrank arms. FEATURES: White nylon construction.

TRAXXAS

Traxxas Steering Arm Set 1/16 (upper & lower), 7043

Traxxas Steering Arm Set 1/16 (upper & lower). Includes the following:steering linkservo hornservo saverservo saver springservo horn mountball stud (2)shock mounts, front & rear2.5x18mm CS (4)

TRAXXAS

Traxxas Suspension Pin Set (front or rear), 7021

This is the Suspension Pin Set for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas 1/16 Slash Push Rods (aluminum red-anodized), 7018X

These are the optional Red-Anodized Aluminum Pushrods for use on the Traxxas 1/16 scale Slash Vehicles.

TRAXXAS

Traxxas Front Suspension Arm Set for 1/16 Slash, 7031

This is the Front Suspension Arm Set for use on the Traxxas 1/16 Slash VXL 4WD RTR.

TRAXXAS

Traxxas Hollow Balls 1/16 (20), 7028

Traxxas Hollow Balls 1/16 (20)