Traxxas 1/10 Rally VXL Transmission & Gearing

TRAXXAS

Traxxas Heavy Duty Slipper Clutch Rebuild Kit, 5352R

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas. Fits Revo, Maxx and Slayer Pro 4x4 trucks. Includes steel disc/ aluminum friction pads (3)/ spring, Revo (1)/ spring, Maxx (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1).

TRAXXAS

Traxxas Center Rear Drive Hub for Slash 4x4, 6888

This is the Center Rear Drive Hub for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Heavy Duty 12-T Pinion Gear (32-pitch), 3942X

This is a 12-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Heavy Duty Pinion Gear (22-T; 32-p), 3952X

This is a 22-tooth, 32-pitch heavy duty pinion gear (machined steel) for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Differential Ring and Pinion Gear Rear 4x4, 6879

This is the Rear Differential Ring and Pinion Gear set for the Traxxas Slash and Stampede 4x4.

TRAXXAS

Traxxas Heavy Duty 16-T Pinion Gear (32-pitch), 3946X

This is a 16-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Slipper Pressure Plate & Hub (aluminum alloy), 5556

These are the Slipper Press Plate and Hub for several Traxxas R/C vehicles. INCLUDES: One Slipper Press Plate; One Slipper Press Plate Hub.

TRAXXAS

Traxxas Rear Differential Housings, 6880

This is the Rear Differential Housing set for the Traxxas Slash and Stampede 4x4.

TRAXXAS

Traxxas Rear Driveshafts Steel-Spline Constant Velocity, 6852R

These are the Traxxas Steel-Spline Constant Velocity Rear Driveshafts for the Slash 4x4, Stampede 4x4, and Rally 1/10. These upgrade driveshafts are great for increasing power transfer efficiency and handling the large amount of torque produced by...

TRAXXAS

Traxxas Ball Bearings (6x12x4mm, blue rubber sealed), 5117

This is a 2-pack of Traxxas 6x12x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Heavy Duty Pinion Gear (21-T; 32-p), 3951X

This is a 21-tooth, 32-pitch heavy duty pinion gear (machined steel) for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Screws 3x6mm Cap-Head Machine Hex, 2554

These are replacement 3x6mm cap-head machine screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Gear Cover and Wire Retainer for Rally 10th, 7477

This is the Traxxas Gear Cover and Wire Retainer for the Rally 10th Scale R/C Car.

TRAXXAS

Traxxas Aluminum Bearing Adapter for Slipper Shaft, 6893X

This is the Aluminum Bearing Adapter for Slipper Shaft of the Traxxas Slash and Stampede 4X4 monster truck. Includes bearing adapter and 10x15x4mm ball bearing.

TRAXXAS

Traxxas Complete Center Differential Kit for Slash 4X4, 6814

This is the Traxxas Complete Center Differential Kit for Slash 4X4.

TRAXXAS

Traxxas Slipper Pressure Plate/Hub (alloy), 5351

This is a Replacement Slipper Pressure Plate and Slipper Hub for several Traxxas vehicles, including the Revo series, Maxx series, Summit & Slayer. These are part of the slipper assembly.FEATURES: Aluminum constructionINCLUDES: One slipper pressure...

TRAXXAS

Traxxas Cap-Head Machine Screws (2.5x8mm) (6), 3965

This is a 6 pack of Traxxas 2.5X8mm Cap Head Screws.

TRAXXAS

Traxxas Heavy Duty 19-T Pinion Gear (32-pitch), 3949X

This is a 19-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Silicone Grease, 1647

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.

TRAXXAS

Traxxas Slipper Clutch Shaft with Roll Pin, 3793

This is the Traxxas Slipper Clutch Shaft with Roll Pin. This part will fit both the standard and XL version of the Rustler or Stampede.

TRAXXAS

Traxxas Heavy Duty 14-T Pinion Gear (32-pitch), 3944X

This is a 14-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Center Differential Gear Set Slash 4x4, 6883

Traxxas Center Differential Gear Set for the Slash 4x4. Includes output gears (2)/ spider gears (2)/ spider gear shaft.

TRAXXAS

Traxxas Heavy Duty 13-T Pinion Gear (32-pitch), 3943X

This is a 13-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Spur Gear 52T 0.8 Metric Pitch, 6843

This is a Traxxas Spur Gear 52T 0.8 Metric Pitch (compatible with 32-pitch).

TRAXXAS

Traxxas Heavy Duty 15-T Pinion Gear (32-pitch), 3945X

This is a 15-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Complete Front Differential for 4x4 Slash, Stampede, Rustler, 6788

This is the Complete Front Differential for the 1/10 Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, Hoss 4x4, and Rally 4x4.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5552X

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 and other 1/10 scale Traxxas Trucks. Includes steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL/ 5.0mm NL. Replaces Traxxas 5552.

TRAXXAS

Traxxas Complete Slipper Clutch - Stampede 4x4, 6878

This is the Complete Slipper Clutch for the Traxxas Stampede 4x4.

TRAXXAS

Traxxas Differential Ring and Pinion Gears, 5379X

This is the Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3, Slash and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Spur Gear 54-Tooth 0.8 metric pitch for Slash 4x4 center differential, 3956R

This is the Traxxas Spur Gear 54-Tooth 0.8 metric pitch for the Slash and Stampede 4x4 center differential. It is compatible with 32-pitch.

TRAXXAS

Traxxas Ball Bearings (10x15x4mm, blue rubber sealed), 5119

This is a 2-pack of Traxxas 10x15x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Differential Carrier w/gaskets, 5381

This is the Diff Carrier/Gasket Set for the Traxxas Revo and Slayer.

TRAXXAS

Traxxas Front Differential Housings, 6881

This is the Front Differential Housing set for the Traxxas Slash and Stampede 4x4.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5352X

This is the Traxxas Slipper Clutch Rebuild Kit for Revo, Summit and Maxx trucks. Includes steel disc, (3) friction pads, (2) springs, 2x9.8mm pin, 5x8mm MW, 5mm NL, 4mm NL.

TRAXXAS

Traxxas Front Steel Drive Hub Slash 4x4, 6888X

This is the Front Hardened Steel Drive Hub for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Spur Gear (54-tooth; 0.8 metric pitch), 3956

This is the 54-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Spur Gear 52-Tooth 0.8 metric pitch for Slash 4x4 center differential, 6843R

This is the Traxxas Spur Gear 52-Tooth 0.8 metric pitch for the Slash and Stampede 4x4 center differential. It is compatible with 32-pitch.

TRAXXAS

Traxxas Ball Bearings (8x16x5mm, blue rubber sealed), 5118

This is a 2-pack of Traxxas 8x16x5mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Heavy Duty 18-T Pinion Gear (32-pitch), 3948X

This is a 18-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Front Machined Differential Ring and Pinion Gears, 5379R

This is the Front Machined Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3, Slash, and other specified Traxxas R/C vehicles. Spiral cut machined.