MENU
This is the Kyosho Toyota Tacoma 2021 1/10 TRD Pro Electric Lime 4WD KB10L Readyset. With rugged tires and undercarriage to handle rough terrain and a large rear cargo bed, pickup trucks are in high demand throughout North America, Southeast Asia, Africa, and Australia and many popular pickup trucks have been recreated as R/C models. Toyota developed the Tacoma mainly for the North American market and it has continued to sell well since its release in 1995. This model is based on the 3rd generation Tacoma which first appeared to much acclaim in 2016 due to its aggressive styling and practicality. The top of the range Tacoma TRD Pro has been recreated by Kyosho with a tough 1/10 scale chassis in a Readyset package. Kyosho's molding craftmanship immaculately reproduces the TRD Pro body in lightweight but rigid polycarbonate resin with the strength for hard off-road driving. Based on the off-road KB10 chassis, the long wheelbase and short tread of the KB10L chassis matches the body perfectly. The shaft-driven 4WD system reliably transfers the brute power of the TORX10L brushless motor to reach top speeds of about 75km/h under the management of the ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery. This convenient Readyset package contains the fun of an ultra-scale pickup truck on a dynamic off-road chassis with a finish similar in quality to premium display-only models.
FEATURES:
- Readyset includes R/C system pre-installed on the chassis and a pistol-grip transmitter.
- Pre-painted and assembled "Toyota Tacoma TRD Pro" ultra-scale body fully captures the form of the original truck.
- Designed body mounts conceal body pins from the outside to realize a higher sense of scale.
- LED lights (sold separately) can be attached to the front and rear light buckets. The scale feeling is further enhanced when 4 front lights and 2 rear lights (4 if reverse lights installed) are fully lit. *Recommended: Front 4 lights, Rear 2 lights (97054-4CR x 1, 97054-2B x 1) / With reverse lights, Front 4 lights, Rear 4 lights (97054-4B x 1, 97054-4CR x 1)
- Full-time 4WD KB10L chassis can handle rough roads as well as on-road and flat dirt.
- Battery holder compatible with 3S size batteries. The battery is fixed with a belt that is easy to take off and on.
- Includes powerful TORX 10L brushless motor and waterproof BRAINZ 10 + brushless ESC.
- 3 differential design for enhanced running stability. #10000 oil is pre-filled in the center diff and #5000 oil in the front and rear diffs.
- Full ball bearings (22) equipped for optimal drive efficiency and durability.
- Each gear unit, receiver are enclosed in a sealed box to prevent compromise from sand and dirt while driving.
- Pistol grip type Syncro KT-231P+ transmitter included allows various setting changes.
- Battery charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately.
INCLUDES:
- Factory assembled chassis
- Pre-cut and painted body complete with decals applied
- 2.4GHz Syncro KT-231P+ transmitter
- 1.5mm/2.0mm/2.5mm L shaped hex wrenches
- Cross wrench
- 4/5/5.5/7/10mm Integrated spanner
REQUIRES:
- 2S or 3S LiPo Battery with T-Plug Connector (Installable battery size 143x47x30mm)
- Charger for selected battery
- (4) AA Alkaline Batteries for transmitter
TECHNICAL SPECS:
- LENGTH: 570mm (22.44")
- WIDTH: 274mm (10.78")
- WHEELBASE: 340mm (13.38")
- HEIGHT: 214mm (8.42")
- WEIGHT: 3410g
- TREAD: F:224mm R:224mm
- TIRE (F&R): 110 x 47mm
- GEAR RATIO: 10.41:1
- MOTOR: TORX10L Brushless Motor kv2850
OPTIONAL ACCESSORIES AND EXTRAS (See "PRODUCT ACCESSORIES" BELOW):
- Ultra Power Multi-Function Charger
- 2S or 3S LiPo Battery with Deans (T-style) Plug
