Traxxas Stampede 4X4 XL-5 and VXL Driveline & Steering

TRAXXAS

Traxxas CV Half Shaft Internal Splined, 9056X

This is the Internal Splined Constant Velocity CV Half-Shaft for the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas CV Half Shaft External Splined, 9055X

This is the External Splined Constant Velocity CV Half-Shaft for the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas Rear Stub Axle Steel-Splined Constant Velocity, 9053X

This is the Steel-Splined Constant Velocity Rear Stub Axle for the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas Front Steel Constant-Velocity Driveshafts for Slash 4x4/Stampede 4x4, 6851R

This is a front set of Steel Constant-Velocity Driveshafts assembled with outer dust boots for the Traxxas Slash 4x4 and Stampede 4x4. These upgrade driveshafts are great for increasing power transfer efficiency and handling the large amount of torque...

TRAXXAS

Traxxas Center Rear Drive Hub for Slash 4x4, 6888

This is the Center Rear Drive Hub for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Cross and Drive Pin Set for Repair of 1 Axle Shaft, 9059X

This is the Cross and Drive Pin Set to repair 1 axle shaft. Includes Cross pin (2)/ drive pin (2), and works with the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models.

TRAXXAS

Traxxas Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts, 9058X

This is the Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts used on the Traxxas Hoss 4x4, Rustler 4X4, Stampede 4X4, Slash 4X4, and Slash 2WD models. Includes pins and hardware for one axle shaft.

TRAXXAS

Traxxas Steering Bellcranks and Servo Saver for Slash 4x4, 6845X

This is the Steering Bellcranks and Servo Saver for Set for the Traxxas Slash 4x4. Includes steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn. This part replaces the original Traxxas 6845.

TRAXXAS

Traxxas Heavy-Duty Differential Output Yokes with Screw Pins, 6828X

These are the Heavy-Duty Differential Output Yokes with Screw Pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Ball Bearings (5x8x2.5mm, blue rubber sealed), 5114

This is a 2-pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Front Heavy-Duty Stub Axles w/yokes and pins, 6854X

These are the Front Heavy-Duty Stub Axles with yokes and pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Front Stub Axle Steel-Splined Constant-Velocity, 6754

This is the Steel-Splined Constant-Velocity Front Stub Axle used on several Traxxas R/C vehicles. Includes 1 piece.

TRAXXAS

Traxxas Slipper Pressure Plate & Hub (aluminum alloy), 5556

These are the Slipper Press Plate and Hub for several Traxxas R/C vehicles. INCLUDES: One Slipper Press Plate; One Slipper Press Plate Hub.

TRAXXAS

Traxxas Turnbuckles, 58mm Camber Links, front or rear, 5539

These are the turnbuckles, 58mm camber links, for the front or rear of the Traxxas Jato. It is set of 2 and they come assembled with rod ends and hollow balls.

TRAXXAS

Traxxas Rear Driveshafts Steel-Spline Constant Velocity, 6852R

These are the Traxxas Steel-Spline Constant Velocity Rear Driveshafts for the Slash 4x4, Stampede 4x4, and Rally 1/10. These upgrade driveshafts are great for increasing power transfer efficiency and handling the large amount of torque produced by...

TRAXXAS

Traxxas Rear Heavy-Duty Stub Axles, 6853X

These are the Rear Heavy-Duty Stub Axles with pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Ball Bearings (6x12x4mm, blue rubber sealed), 5117

This is a 2-pack of Traxxas 6x12x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Clear Gear Cover Slash 4x4, 6877A

This is the Clear Gear Cover for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Ball Bearings (12x18x4mm, blue rubber sealed), 5120

This is a 2-pack of Traxxas 12x18x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Motor Plate 6061-TS Blue-Anodized Aluminum, 6890X

This is the Upgrade Blue-Anodized 6061-TS Aluminum Motor Plate for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Aluminum Center Driveshaft, 6755

This is the Aluminum Center Driveshaft for the Traxxas Stampede 4x4 monster truck.

TRAXXAS

Traxxas 39mm Camber Link Turnbuckles, 3644

These are the 39mm camber link turnbuckles for the Traxxas Stampede and Rustler (69mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right).

TRAXXAS

Traxxas Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts, 6757

This is the Rebuild Kit for Steel-Splined Constant-Velocity Driveshafts used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Screws 3x6mm Cap-Head Machine Hex, 2554

These are replacement 3x6mm cap-head machine screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Center Driveshaft Cover Clear, 6741

This is the Clear Center Driveshaft Cover for the Traxxas Stampede 4x4 monster truck.

TRAXXAS

Traxxas Aluminum Bearing Adapter for Slipper Shaft, 6893X

This is the Aluminum Bearing Adapter for Slipper Shaft of the Traxxas Slash and Stampede 4X4 monster truck. Includes bearing adapter and 10x15x4mm ball bearing.

TRAXXAS

Traxxas Rod Ends (long w/hollow balls, 6), 2742

This is the 6-piece long Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas Rear Heavy-Duty Driveshaft Assembly (left or right), 6852X

This is the Rear Heavy-Duty Driveshaft Assembly, left or right, with screw pin that comes fully assembled for the Slash 4X4 or Stampede 4X4 monster trucks. This item replaces the TRA6852.

TRAXXAS

Traxxas Front Heavy-Duty Driveshaft Assembly (left or right), 6851X

This is the Front Heavy-Duty Driveshaft Assembly, left or right, with screw pin that comes fully assembled for the Slash 4X4 or Stampede 4X4 monster trucks. Replaces TRA6851.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x6mm, 2575

This is a package of six 3x6mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Ball Bearings (5x11x4mm, blue rubber sealed), 5116

This is a 2-pack of Traxxas 5X11X4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Steering Linkage for Rustler 4X4 and Others, 6846

This is Steering Linkage (3x20mm turnbuckle) for the Rustler 4X4, Slash 4X4, and other specified models. Includes rod ends (2)/ hollow balls (2). Fits the Following Models: Slash 4X4 VXL Slash 4X4 Slash VXL Stampede 4x4 VXL Stampede 4x4 Telluride...

TRAXXAS

Traxxas Grease, White Lithium, 5148

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as nylon gears.

TRAXXAS

Traxxas Motor Plate Slash 4x4, 6890

This is the Motor Plate for the Traxxas Slash 4x4.